[Tue May 21 00:40:30 2013] Detection parameters:
  Position = (342.9, 343.0) = 18 52 29.74 0 42 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.6 +/- 26.8
  Background counts = 70.3
  Rate = 0.01 +/- 0.0009

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 4.56'
[Tue May 21 00:41:23 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:23 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Tue May 21 00:41:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Tue May 21 00:41:23 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.71"
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src16.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src16.csv
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src16.csv
[Tue May 21 00:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue May 21 00:41:27 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 2060.170000, observed total counts = 2058.000000
[Tue May 21 00:42:11 2013] Offset between fit and detection position for source 17 = 2.773202 pixels
[Tue May 21 00:42:11 2013] 1924.916000 total counts/ 1208.690000 bgd. counts: snr = 20.601205
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.773202 pixels
  Position = (341.8, 345.5) = 18 52 30.08 0 42 18.2
  Extent = 17.4 (17.3-34.8)", rotation angle = 0
  Source counts = 716.2 +/- 43.9
  Background counts = 1208.7
  Rate = 0.02 +/- 0.001
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 1308.700000, observed total counts = 1306.000000
[Tue May 21 00:42:11 2013] Offset between fit and detection position for source 17 = 2.191677 pixels
[Tue May 21 00:42:11 2013] Warning, changing simple spatial fit ID from 16 to 50
[Tue May 21 00:42:11 2013] 1266.121000 total counts/ 1103.350000 bgd. counts: snr = 4.900274
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.191677 pixels
  Position = (339.9, 346.6) = 18 52 30.62 0 42 23.2
  Extent = 17.2 (17.2-17.2)", rotation angle = 0
  Source counts = 162.8 +/- 35.6
  Background counts = 1103.3
  Rate = 0.005 +/- 0.001
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:11 2013] Source is confused with source 40
[Tue May 21 00:42:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 17.18"
[Tue May 21 00:42:39 2013] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.023
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 17.18"
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src16.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src16.csv
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src16.csv
[Tue May 21 00:42:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue May 21 00:42:42 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue May 21 00:43:22 2013] Warning, spatial fit 16 centroid is now closest to src. 40
[Tue May 21 00:43:22 2013] Source 17 is offset by 1.121080 and 4.756046 pixels which is larger than
2 X fitted extent = 0.988193 x 0.988193, not incorporating fit results
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:03 2013] XMMSAS src. selection expression = ellipse(29523.280000, 30109.646000, 1030.980030, 1030.980030, 0.000000, X, Y)
[Wed May 22 09:52:03 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src.reg
[Wed May 22 09:52:03 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (281, 287) - (399, 406)
[Wed May 22 09:52:03 2013] XMMSAS bgd. selection expression = annulus(29523.280000, 30109.646000, 1718.300049, 3436.600099, X, Y) && !ellipse(27124.762800, 27626.509800, 324.378409, 324.378409, 0.000000, X, Y) && !ellipse(29153.820200, 26198.730200, 837.952024, 837.952024, 0.000000, X, Y) && !ellipse(28322.552000, 27023.922400, 572.545616, 572.545616, 0.000000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(27142.412229, 30139.219315, 1961.360056, 875.993230, 0.077332, X, Y) && !ellipse(29438.857800, 27170.442000, 1292.768037, 1292.768037, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30617.046000, 28405.700800, 1404.960040, 1404.960040, 0.000000, X, Y) && !ellipse(28013.978180, 29265.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31074.446381, 28208.995392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.522000, 28480.520000, 1197.480034, 1197.480034, 0.000000, X, Y) && !ellipse(30850.680511, 29523.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.077057, 30213.502686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25720.248000, 27299.336000, 1157.744033, 1157.744033, 0.000000, X, Y) && !ellipse(28593.602936, 29270.385834, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 09:52:03 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17.gif
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed May 22 09:52:05 2013] Mean detx,y = (-2221.42, 2606.65) 
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src.img and ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Wed May 22 09:52:05 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 22 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed May 22 13:52:16 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:16 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 2758.00
[Wed May 22 13:52:16 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_bgd.pi.gz = 2115.00
[Wed May 22 13:52:16 2013] Got source and background scale factors 3343180.000000, 13704972.000000
[Wed May 22 13:52:16 2013] User source parameters:
  Position = (339.9, 346.6) = 18 52 30.62 0 42 23.2
  Extent = 17.2 (17.2-17.2)", rotation angle = 0
  Source aperture counts = 2242.1 +/- 53.5
  Background aperture counts = 515.9
  Rate = 0.07 +/- 0.002

[Wed May 22 13:52:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:24 2013] Using photon index=1.80, rate=0.00481, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17.arf
[Wed May 22 13:52:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:24 2013] Updating source flux to 1e-13
[Wed May 22 13:53:08 2013] Flag b found in src. 17 procflags, skipping spectral fitting
[Wed May 22 13:53:08 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete