[Tue May 21 00:40:30 2013] Detection parameters:
  Position = (322.1, 289.0) = 18 52 35.79 0 38 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 814.1 +/- 37.9
  Background counts = 65.8
  Rate = 0.03 +/- 0.001

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 1.85'
[Tue May 21 00:41:23 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:23 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Tue May 21 00:41:23 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.782
[Tue May 21 00:41:23 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.35"
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src6.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src6.csv
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src6.csv
[Tue May 21 00:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue May 21 00:41:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 4469.980000, observed total counts = 3821.000000
[Tue May 21 00:42:11 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:39 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Tue May 21 00:42:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.782
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.35"
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src6.csv
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src6.csv
[Tue May 21 00:42:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May 21 00:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:43:22 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 17.095678 pixels away
[Tue May 21 00:43:22 2013] Spatial fit model total counts = 3140.950000, observed total counts = 2690.000000
[Tue May 21 00:43:22 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:02 2013] XMMSAS src. selection expression = ellipse(27974.304077, 25097.306366, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 09:52:02 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src.reg
[Wed May 22 09:52:02 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (285, 252) - (360, 327)
[Wed May 22 09:52:02 2013] XMMSAS bgd. selection expression = annulus(27974.304077, 25097.306366, 1087.500000, 2175.000000, X, Y) && !ellipse(27228.033752, 24749.030243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.178000, 25395.666000, 1097.520032, 1097.520032, 0.000000, X, Y) && !ellipse(29153.820200, 26198.730200, 837.952024, 837.952024, 0.000000, X, Y) && !ellipse(26077.916000, 24197.250000, 1925.256055, 1776.752051, 340.123000, X, Y) && !ellipse(25621.422424, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.552000, 27023.922400, 572.545616, 572.545616, 0.000000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(24954.964400, 27628.772000, 957.496028, 957.496028, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(29438.857800, 27170.442000, 1292.768037, 1292.768037, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27305.512817, 25684.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30617.046000, 28405.700800, 1404.960040, 1404.960040, 0.000000, X, Y) && !ellipse(25720.248000, 27299.336000, 1157.744033, 1157.744033, 0.000000, X, Y)
[Wed May 22 09:52:02 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13.gif
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed May 22 09:52:05 2013] Mean detx,y = (-879.11, -2285.30) 
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src.img and ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed May 22 09:52:05 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 22 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed May 22 10:23:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 10:23:19 2013] rmf not generated due to insufficient counts
[Wed May 22 13:52:12 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:13 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 2673.00
[Wed May 22 13:52:13 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.pi.gz = 530.00
[Wed May 22 13:52:13 2013] Got source and background scale factors 1192212.000000, 2245096.000000
[Wed May 22 13:52:13 2013] User source parameters:
  Position = (322.1, 289.0) = 18 52 35.79 0 38 12.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2391.6 +/- 52.7
  Background aperture counts = 281.4
  Rate = 0.07 +/- 0.002

[Wed May 22 13:52:13 2013] Updating counts from extracted products
[Wed May 22 13:52:13 2013] Set source signif. to 2391.55/16.78 = 142.56
[Wed May 22 13:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:23 2013] Using photon index=1.80, rate=0.0707, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13.arf
[Wed May 22 13:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:23 2013] Updating source flux to 1.3e-12
[Wed May 22 13:53:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete