[Tue May 21 00:40:30 2013] Detection parameters:
  Position = (313.5, 285.0) = 18 52 38.27 0 37 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1056.5 +/- 46.8
  Background counts = 63.5
  Rate = 0.03 +/- 0.001

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 1.46'
[Tue May 21 00:41:23 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:23 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Tue May 21 00:41:23 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.086
[Tue May 21 00:41:23 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.16"
[Tue May 21 00:41:24 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 21 00:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src3.csv
[Tue May 21 00:41:24 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 21 00:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src3.csv
[Tue May 21 00:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 21 00:41:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 4060.670000, observed total counts = 3662.000000
[Tue May 21 00:42:11 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:11 2013] Source is confused with source 12
[Tue May 21 00:42:39 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Tue May 21 00:42:39 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.086
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.16"
[Tue May 21 00:42:39 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 21 00:42:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src3.csv
[Tue May 21 00:42:39 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 21 00:42:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src3.csv
[Tue May 21 00:42:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 21 00:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:43:22 2013] Spatial fit model total counts = 4031.370000, observed total counts = 3662.000000
[Tue May 21 00:43:22 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:02 2013] Counts = 1056.468994, rescaling region sizes by 2.000000
[Wed May 22 09:52:02 2013] XMMSAS src. selection expression = ellipse(27228.033752, 24749.030243, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 22 09:52:02 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src.reg
[Wed May 22 09:52:02 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (239, 210) - (389, 360)
[Wed May 22 09:52:02 2013] XMMSAS bgd. selection expression = annulus(27228.033752, 24749.030243, 4350.000000, 8700.000000, X, Y) && !ellipse(24684.217600, 19175.153200, 471.324814, 471.324814, 0.000000, X, Y) && !ellipse(27124.762800, 27626.509800, 324.378409, 324.378409, 0.000000, X, Y) && !ellipse(25215.178000, 25395.666000, 1097.520032, 1097.520032, 0.000000, X, Y) && !ellipse(29153.820200, 26198.730200, 837.952024, 837.952024, 0.000000, X, Y) && !ellipse(27974.304077, 25097.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24512.224000, 26013.358000, 1124.392032, 1124.392032, 0.000000, X, Y) && !ellipse(26077.916000, 24197.250000, 1925.256055, 1776.752051, 340.123000, X, Y) && !ellipse(25621.422424, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.552000, 27023.922400, 572.545616, 572.545616, 0.000000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(24954.964400, 27628.772000, 957.496028, 957.496028, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(23815.696400, 26565.664400, 1003.504029, 1003.504029, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(29523.280000, 30109.646000, 1374.640040, 1374.640040, 0.000000, X, Y) && !ellipse(27142.412229, 30139.219315, 1961.360056, 875.993230, 0.077332, X, Y) && !ellipse(22343.960800, 26933.490000, 588.558417, 588.558417, 0.000000, X, Y) && !ellipse(24073.401200, 28187.064000, 926.184027, 926.184027, 0.000000, X, Y) && !ellipse(29438.857800, 27170.442000, 1292.768037, 1292.768037, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(21975.632800, 27742.202000, 2331.448067, 2331.448067, 0.000000, X, Y) && !ellipse(24229.111786, 27615.261810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22316.619840, 26603.656000, 1055.856030, 1055.856030, 0.000000, X, Y) && !ellipse(24020.287400, 29872.885240, 1044.568030, 1044.568030, 0.000000, X, Y) && !ellipse(22347.914673, 27532.902802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27305.512817, 25684.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.576400, 28345.122000, 1353.544039, 1353.544039, 0.000000, X, Y) && !ellipse(30617.046000, 28405.700800, 1404.960040, 1404.960040, 0.000000, X, Y) && !ellipse(28013.978180, 29265.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31074.446381, 28208.995392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.146000, 23899.600000, 1178.352034, 1178.352034, 0.000000, X, Y) && !ellipse(22279.911600, 26066.208000, 1404.960040, 510.257615, 91.563000, X, Y) && !ellipse(26431.522000, 28480.520000, 1197.480034, 1197.480034, 0.000000, X, Y) && !ellipse(30850.680511, 29523.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.274628, 18421.216614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24876.763702, 28193.083801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.077057, 30213.502686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.139404, 24912.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25720.248000, 27299.336000, 1157.744033, 1157.744033, 0.000000, X, Y) && !ellipse(28593.602936, 29270.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22749.804000, 18077.170000, 1545.528044, 1545.528044, 0.000000, X, Y)
[Wed May 22 09:52:02 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11.gif
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed May 22 09:52:05 2013] Mean detx,y = (-123.58, -2602.02) 
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src.img and ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed May 22 09:52:05 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 22 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed May 22 10:09:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 10:09:44 2013] rmf not generated due to insufficient counts
[Wed May 22 13:52:11 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:11 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 7661.00
[Wed May 22 13:52:11 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 16574.00
[Wed May 22 13:52:11 2013] Got source and background scale factors 4980288.000000, 124689527.000000
[Wed May 22 13:52:12 2013] User source parameters:
  Position = (313.5, 285.0) = 18 52 38.27 0 37 55.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 6999.0 +/- 88.5
  Background aperture counts = 662.0
  Rate = 0.2 +/- 0.003

[Wed May 22 13:52:12 2013] Updating counts from extracted products
[Wed May 22 13:52:12 2013] Set source signif. to 6999.01/25.73 = 272.03
[Wed May 22 13:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:23 2013] Using photon index=1.80, rate=0.207, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11.arf
[Wed May 22 13:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:23 2013] Updating source flux to 3.5e-12
[Wed May 22 13:53:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete