[Tue May 21 00:40:27 2013] Detection parameters:
  Position = (255.9, 299.2) = 18 52 54.97 0 38 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.6 +/- 15.8
  Background counts = 47.7
  Rate = 0.003 +/- 0.0006

[Tue May 21 00:40:28 2013] Off-axis axis estimate = 3.08'
[Tue May 21 00:41:19 2013] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:19 2013] Initial guess for spatial extent in simple fitting = 7.97"
[Tue May 21 00:41:19 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Tue May 21 00:41:19 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 7.97"
[Tue May 21 00:41:22 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src48.ximg exists
[Tue May 21 00:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src48.csv
[Tue May 21 00:41:22 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src48_1.ximg exists
[Tue May 21 00:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src48.csv
[Tue May 21 00:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:23 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Tue May 21 00:41:23 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Tue May 21 00:41:23 2013] Fit fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Tue May 21 00:41:53 2013] Source 47 is offset by -7.827832 and 0.419920 pixels which is larger than
2 X fitted extent = 1.108759 x 1.108759, not incorporating fit results
[Tue May 21 00:41:53 2013] Warning, spatial fit 48 centroid is now closest to src. 46
[Tue May 21 00:41:53 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:41:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:41:53 2013] Assessing source extent using major
[Tue May 21 00:41:53 2013] Source does appear to be extended
[Tue May 21 00:41:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:41:53 2013] Source is confused with source 46
[Tue May 21 00:42:36 2013] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:36 2013] Initial guess for spatial extent in simple fitting = 7.97"
[Tue May 21 00:42:36 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Tue May 21 00:42:36 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 7.97"
[Tue May 21 00:42:38 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src41.ximg exists
[Tue May 21 00:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src41.csv
[Tue May 21 00:42:38 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue May 21 00:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src41.csv
[Tue May 21 00:42:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:39 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue May 21 00:42:39 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue May 21 00:42:39 2013] Fit fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Tue May 21 00:43:05 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 10.909573 pixels away
[Tue May 21 00:43:05 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:05 2013] Assessing source extent using major
[Tue May 21 00:43:05 2013] Source does appear to be extended
[Tue May 21 00:43:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 09:52:04 2013] XMMSAS src. selection expression = ellipse(22218.184631, 25981.139069, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 09:52:04 2013] Not overwriting source region fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src.reg
[Tue May 21 09:52:04 2013] Extracting stamp from image fullrun_mos1_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (218, 262) - (293, 337)
[Tue May 21 09:52:04 2013] XMMSAS bgd. selection expression = annulus(22218.184631, 25981.139069, 1087.500000, 2175.000000, X, Y) && !ellipse(25115.320243, 25200.485048, 1096.784032, 755.468580, 46.523054, X, Y) && !ellipse(25327.092000, 25644.858000, 1359.264039, 1359.264039, 0.000000, X, Y) && !ellipse(24324.481600, 26064.323000, 721.121621, 721.121621, 0.000000, X, Y) && !ellipse(24602.036000, 25943.531200, 1442.240041, 1442.240041, 0.000000, X, Y) && !ellipse(24132.060780, 28184.351600, 803.816023, 803.816023, 0.000000, X, Y) && !ellipse(24890.026971, 26781.186079, 1256.344036, 722.453838, 96.034255, X, Y) && !ellipse(23773.466980, 26774.858000, 978.024028, 978.024028, 0.000000, X, Y) && !ellipse(21690.413200, 27475.548000, 528.775215, 528.775215, 0.000000, X, Y) && !ellipse(22331.842800, 26532.520400, 733.892021, 733.892021, 0.000000, X, Y) && !ellipse(24315.837400, 24034.318000, 1181.096034, 569.978416, 334.472600, X, Y) && !ellipse(23599.990800, 24290.642400, 1154.144033, 622.977618, 50.065000, X, Y) && !ellipse(21900.240400, 28284.620000, 1353.128039, 1353.128039, 0.000000, X, Y) && !ellipse(21670.835739, 27955.933929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.042000, 29315.088000, 1238.720036, 1238.720036, 0.000000, X, Y) && !ellipse(24138.872650, 24841.088074, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 09:52:04 2013] Writing fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47.gif
[Tue May 21 09:52:06 2013] ../../xmm0550670501/products/events/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0550670501/products/events/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Tue May 21 09:52:06 2013] Mean detx,y = (-1418.77, -5016.62) 
[Tue May 21 09:52:06 2013] ../../xmm0550670501/products/images/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src.img and ../../xmm0550670501/products/images/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Tue May 21 09:52:06 2013] ../../xmm0550670501/products/spectra/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Tue May 21 09:52:06 2013] Setting source spectrum file to fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue May 21 09:52:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue May 21 09:52:06 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Wed May 22 09:52:02 2013] Not generating rmf since there are only 88 counts
[Wed May 22 09:52:02 2013] rmf not generated due to insufficient counts
[Wed May 22 09:52:02 2013] fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47.arf exists, delete to re-create
[Wed May 22 13:52:06 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:06 2013] Total counts from fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 582.00
[Wed May 22 13:52:06 2013] Total counts from fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_bgd.pi.gz = 783.00
[Wed May 22 13:52:06 2013] Got source and background scale factors 1345600.000000, 4528455.000000
[Wed May 22 13:52:06 2013] User source parameters:
  Position = (255.9, 299.2) = 18 52 54.97 0 38 54.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 349.3 +/- 25.1
  Background aperture counts = 232.7
  Rate = 0.01 +/- 0.0007

[Wed May 22 13:52:06 2013] Updating counts from extracted products
[Wed May 22 13:52:06 2013] Set source signif. to 349.34/15.25 = 22.90
[Wed May 22 13:52:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:11 2013] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47.arf
[Wed May 22 13:52:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:11 2013] Updating source flux to 2.4e-13
[Wed May 22 13:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:53:08 2013] xmm0550670501/analysis//spectral/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete