[Tue May 21 00:40:21 2013] Detection parameters:
  Position = (281.2, 300.0) = 18 52 47.64 0 39 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 541.3 +/- 33.5
  Background counts = 77.9
  Rate = 0.02 +/- 0.001

[Tue May 21 00:40:28 2013] Off-axis axis estimate = 1.25'
[Tue May 21 00:41:19 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:19 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Tue May 21 00:41:19 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.889
[Tue May 21 00:41:19 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.05"
[Tue May 21 00:41:20 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src7.ximg exists
[Tue May 21 00:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src7.csv
[Tue May 21 00:41:20 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue May 21 00:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src7.csv
[Tue May 21 00:41:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:22 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue May 21 00:41:22 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue May 21 00:41:22 2013] Fit fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue May 21 00:41:53 2013] Spatial fit model total counts = 3297.020000, observed total counts = 3296.000000
[Tue May 21 00:41:53 2013] Offset between fit and detection position for source 4 = 1.098986 pixels
[Tue May 21 00:41:53 2013] 3352.769000 total counts/ 3165.580000 bgd. counts: snr = 3.327007
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.098986 pixels
  Position = (280.1, 300.1) = 18 52 47.95 0 39 0.9
  Extent = 9.0 (6.7-12.1)", rotation angle = 0
  Source counts = 187.2 +/- 57.9
  Background counts = 3165.6
  Rate = 0.006 +/- 0.002
[Tue May 21 00:41:53 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:41:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:41:53 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:41:53 2013] Source does appear to be extended
[Tue May 21 00:41:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:36 2013] Initial guess for spatial extent in simple fitting = 9.01"
[Tue May 21 00:42:36 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.945
[Tue May 21 00:42:36 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.01"
[Tue May 21 00:42:37 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src7.ximg exists
[Tue May 21 00:42:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src7.csv
[Tue May 21 00:42:37 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May 21 00:42:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src7.csv
[Tue May 21 00:42:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:38 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May 21 00:42:38 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May 21 00:42:38 2013] Fit fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue May 21 00:43:05 2013] Warning, spatial fit 7 centroid is now closest to src. 9
[Tue May 21 00:43:05 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:05 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:05 2013] Source does appear to be extended
[Tue May 21 00:43:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:43:05 2013] Source is confused with source 9
[Tue May 21 00:43:05 2013] Source is confused with source 19
[Tue May 21 09:52:02 2013] XMMSAS src. selection expression = ellipse(24324.481600, 26064.323000, 540.841216, 540.841216, 0.000000, X, Y)
[Tue May 21 09:52:02 2013] Not overwriting source region fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src.reg
[Tue May 21 09:52:02 2013] Extracting stamp from image fullrun_mos1_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (249, 269) - (311, 331)
[Tue May 21 09:52:02 2013] XMMSAS bgd. selection expression = annulus(24324.481600, 26064.323000, 901.402026, 1802.804052, X, Y) && !ellipse(27411.716123, 24839.100757, 2253.616065, 1054.731489, 328.523449, X, Y) && !ellipse(25115.320243, 25200.485048, 1096.784032, 755.468580, 46.523054, X, Y) && !ellipse(25327.092000, 25644.858000, 1359.264039, 1359.264039, 0.000000, X, Y) && !ellipse(24602.036000, 25943.531200, 1442.240041, 1442.240041, 0.000000, X, Y) && !ellipse(26196.836600, 26275.783400, 811.408023, 811.408023, 0.000000, X, Y) && !ellipse(24132.060780, 28184.351600, 803.816023, 803.816023, 0.000000, X, Y) && !ellipse(26159.652000, 26386.554000, 1085.504031, 1085.504031, 0.000000, X, Y) && !ellipse(24890.026971, 26781.186079, 1256.344036, 722.453838, 96.034255, X, Y) && !ellipse(23773.466980, 26774.858000, 978.024028, 978.024028, 0.000000, X, Y) && !ellipse(22331.842800, 26532.520400, 733.892021, 733.892021, 0.000000, X, Y) && !ellipse(25643.286591, 26737.602051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.837400, 24034.318000, 1181.096034, 569.978416, 334.472600, X, Y) && !ellipse(23599.990800, 24290.642400, 1154.144033, 622.977618, 50.065000, X, Y) && !ellipse(21900.240400, 28284.620000, 1353.128039, 1353.128039, 0.000000, X, Y) && !ellipse(21670.835739, 27955.933929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22218.184631, 25981.139069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24138.872650, 24841.088074, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 09:52:02 2013] Writing fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4.gif
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0550670501/products/events/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue May 21 09:52:05 2013] Mean detx,y = (-1340.63, -2917.64) 
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src.img and ../../xmm0550670501/products/images/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue May 21 09:52:05 2013] Setting source spectrum file to fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 21 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue May 21 09:52:10 2013] fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4.rmf exists, delete to re-create
[Tue May 21 09:52:10 2013] fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Wed May 22 13:51:59 2013] Updating aperture counts using extracted products
[Wed May 22 13:51:59 2013] Total counts from fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1600.00
[Wed May 22 13:51:59 2013] Total counts from fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_bgd.pi.gz = 131.00
[Wed May 22 13:51:59 2013] Got source and background scale factors 923200.000000, 387200.000000
[Wed May 22 13:51:59 2013] User source parameters:
  Position = (280.1, 300.1) = 18 52 47.95 0 39 0.9
  Extent = 9.0 (6.7-12.1)", rotation angle = 0
  Source aperture counts = 1287.7 +/- 41.0
  Background aperture counts = 312.3
  Rate = 0.04 +/- 0.001

[Wed May 22 13:52:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:09 2013] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4.arf
[Wed May 22 13:52:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:09 2013] Updating source flux to 1.1e-13
[Wed May 22 13:52:29 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Wed May 22 13:53:08 2013] xmm0550670501/analysis//spectral/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete