[Tue May 21 00:40:23 2013] Detection parameters:
  Position = (313.1, 347.0) = 18 52 38.40 0 42 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.7 +/- 28.0
  Background counts = 108.2
  Rate = 0.01 +/- 0.0009

[Tue May 21 00:40:28 2013] Off-axis axis estimate = 3.68'
[Tue May 21 00:41:19 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:19 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Tue May 21 00:41:19 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.694
[Tue May 21 00:41:19 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.27"
[Tue May 21 00:41:21 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 21 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src17.csv
[Tue May 21 00:41:21 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 21 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src17.csv
[Tue May 21 00:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:23 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 21 00:41:23 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 21 00:41:23 2013] Fit fullrun_mos1_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May 21 00:41:53 2013] Spatial fit model total counts = 1706.980000, observed total counts = 1707.000000
[Tue May 21 00:41:53 2013] Offset between fit and detection position for source 22 = 0.523128 pixels
[Tue May 21 00:41:53 2013] 1583.633000 total counts/ 645.511000 bgd. counts: snr = 36.923894
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.523128 pixels
  Position = (313.6, 347.2) = 18 52 38.25 0 42 25.5
  Extent = 16.5 (16.5-16.5)", rotation angle = 0
  Source counts = 938.1 +/- 39.8
  Background counts = 645.5
  Rate = 0.03 +/- 0.001
[Tue May 21 00:41:53 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:41:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:41:53 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:41:53 2013] Source does appear to be extended
[Tue May 21 00:41:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:41:53 2013] Source is confused with source 28
[Tue May 21 00:41:53 2013] Source is confused with source 53
[Tue May 21 00:42:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 00:42:36 2013] Initial guess for spatial extent in simple fitting = 16.53"
[Tue May 21 00:42:36 2013] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.974
[Tue May 21 00:42:36 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 16.53"
[Tue May 21 00:42:37 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src16.ximg exists
[Tue May 21 00:42:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src16.csv
[Tue May 21 00:42:37 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue May 21 00:42:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src16.csv
[Tue May 21 00:42:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:38 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue May 21 00:42:38 2013] fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue May 21 00:42:38 2013] Fit fullrun_mos1_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue May 21 00:43:05 2013] Warning, spatial fit 16 centroid is now closest to src. 28
[Tue May 21 00:43:05 2013] Spatial fit model total counts = 1681.620000, observed total counts = 1669.000000
[Tue May 21 00:43:05 2013] Offset between fit and detection position for source 22 = 1.144081 pixels
[Tue May 21 00:43:05 2013] Warning, changing simple spatial fit ID from 16 to 37
[Tue May 21 00:43:05 2013] 1694.748000 total counts/ 1294.040000 bgd. counts: snr = 11.139204
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.144081 pixels
  Position = (314.2, 348.1) = 18 52 38.07 0 42 29.7
  Extent = 16.3 (16.3-32.6)", rotation angle = 0
  Source counts = 400.7 +/- 41.2
  Background counts = 1294.0
  Rate = 0.01 +/- 0.001
[Tue May 21 00:43:05 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:05 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:05 2013] Source does appear to be extended
[Tue May 21 00:43:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 09:52:02 2013] XMMSAS src. selection expression = ellipse(27289.360000, 30239.238000, 978.108028, 978.108028, 0.000000, X, Y)
[Tue May 21 09:52:02 2013] Not overwriting source region fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src.reg
[Tue May 21 09:52:02 2013] Extracting stamp from image fullrun_mos1_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (258, 292) - (370, 404)
[Tue May 21 09:52:02 2013] XMMSAS bgd. selection expression = annulus(27289.360000, 30239.238000, 1630.180047, 3260.360094, X, Y) && !ellipse(27411.716123, 24839.100757, 2253.616065, 1054.731489, 328.523449, X, Y) && !ellipse(27121.792000, 27608.324000, 328.052009, 328.052009, 0.000000, X, Y) && !ellipse(28325.124000, 25556.446000, 1961.480056, 1961.480056, 0.000000, X, Y) && !ellipse(25327.092000, 25644.858000, 1359.264039, 1359.264039, 0.000000, X, Y) && !ellipse(24602.036000, 25943.531200, 1442.240041, 1442.240041, 0.000000, X, Y) && !ellipse(28377.796000, 26957.304000, 1197.288034, 1197.288034, 0.000000, X, Y) && !ellipse(26196.836600, 26275.783400, 811.408023, 811.408023, 0.000000, X, Y) && !ellipse(27315.474000, 27605.118000, 1142.904033, 1142.904033, 0.000000, X, Y) && !ellipse(24132.060780, 28184.351600, 803.816023, 803.816023, 0.000000, X, Y) && !ellipse(28596.464400, 28235.952400, 676.124819, 676.124819, 0.000000, X, Y) && !ellipse(29282.014000, 26874.148000, 1290.376037, 1290.376037, 0.000000, X, Y) && !ellipse(29351.414000, 26303.850000, 1235.304036, 1235.304036, 0.000000, X, Y) && !ellipse(29709.439780, 30204.358000, 1433.792041, 837.824024, 84.746000, X, Y) && !ellipse(26159.652000, 26386.554000, 1085.504031, 1085.504031, 0.000000, X, Y) && !ellipse(24890.026971, 26781.186079, 1256.344036, 722.453838, 96.034255, X, Y) && !ellipse(30026.312000, 29124.388000, 2877.472083, 2877.472083, 0.000000, X, Y) && !ellipse(23773.466980, 26774.858000, 978.024028, 978.024028, 0.000000, X, Y) && !ellipse(28610.382000, 28292.448000, 1304.704038, 1304.704038, 0.000000, X, Y) && !ellipse(25643.286591, 26737.602051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27728.682007, 28210.216705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29416.378000, 27472.390000, 1321.056038, 1321.056038, 0.000000, X, Y) && !ellipse(24037.281400, 30025.470000, 1458.888042, 1458.888042, 0.000000, X, Y) && !ellipse(29838.386871, 27879.872650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31154.088000, 28407.884000, 1415.544041, 1415.544041, 0.000000, X, Y) && !ellipse(27958.420000, 29511.836000, 657.204819, 657.204819, 0.000000, X, Y) && !ellipse(25052.042000, 29315.088000, 1238.720036, 1238.720036, 0.000000, X, Y) && !ellipse(27205.585480, 26483.701599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24255.029400, 30526.665600, 729.443221, 729.443221, 0.000000, X, Y) && !ellipse(31097.961400, 29493.943600, 1438.736041, 1438.736041, 0.000000, X, Y) && !ellipse(26979.392000, 30109.922000, 2082.600060, 2082.600060, 0.000000, X, Y)
[Tue May 21 09:52:02 2013] Writing fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22.gif
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0550670501/products/events/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Tue May 21 09:52:05 2013] Mean detx,y = (2877.93, -158.20) 
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src.img and ../../xmm0550670501/products/images/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Tue May 21 09:52:05 2013] Setting source spectrum file to fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue May 21 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue May 21 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Tue May 21 09:52:10 2013] fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22.rmf exists, delete to re-create
[Tue May 21 09:52:10 2013] fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Wed May 22 13:52:01 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:01 2013] Total counts from fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 2284.00
[Wed May 22 13:52:01 2013] Total counts from fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1674.00
[Wed May 22 13:52:01 2013] Got source and background scale factors 2949544.000000, 6792276.000000
[Wed May 22 13:52:01 2013] User source parameters:
  Position = (314.2, 348.1) = 18 52 38.07 0 42 29.7
  Extent = 16.3 (16.3-32.6)", rotation angle = 0
  Source aperture counts = 1557.1 +/- 48.8
  Background aperture counts = 726.9
  Rate = 0.05 +/- 0.001

[Wed May 22 13:52:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:09 2013] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22.arf
[Wed May 22 13:52:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:09 2013] Updating source flux to 2.2e-13
[Wed May 22 13:52:29 2013] Flag c found in src. 22 procflags, skipping spectral fitting
[Wed May 22 13:53:08 2013] xmm0550670501/analysis//spectral/fullrun_mos1_xmm0550670501_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete