[Sun Jun  3 03:41:29 2012] Detection parameters:
  Position = (313.9, 285.9) = 18 52 37.98 0 37 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1120.0 +/- 43.5
  Background counts = 68.1
  Rate = 0.03 +/- 0.001

[Sun Jun  3 03:41:31 2012] Off-axis axis estimate = 1.44'
[Sun Jun  3 07:03:31 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:03:31 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Sun Jun  3 07:03:31 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.870
[Sun Jun  3 07:03:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.15"
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  3 09:41:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:12 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  3 09:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  3 09:41:12 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  3 09:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  3 09:41:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:40 2012] Warning, spatial fit 3 centroid is now closest to src. 11
[Sun Jun  3 09:41:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:40 2012] Assessing source extent using major
[Sun Jun  3 09:41:40 2012] Source does appear to be extended
[Sun Jun  3 09:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 14:22:35 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:22:35 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Sun Jun  3 14:22:35 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.870
[Sun Jun  3 14:22:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.15"
[Sun Jun  3 17:47:38 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  3 17:47:38 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  3 17:47:38 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  3 17:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  3 17:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  3 17:47:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 17:48:12 2012] Spatial fit model total counts = 3792.850000, observed total counts = 3852.000000
[Sun Jun  3 17:48:12 2012] Offset between fit and detection position for source 5 = 0.931130 pixels
[Sun Jun  3 17:48:12 2012] 4208.853000 total counts/ 611.323000 bgd. counts: snr = 145.502031
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.931130 pixels
  Position = (313.3, 286.6) = 18 52 38.16 0 38 2.1
  Extent = 11.0" x 10.3", rotation angle = 67
  Source counts = 3597.5 +/- 64.9
  Background counts = 611.3
  Rate = 0.1 +/- 0.002
[Sun Jun  3 17:48:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:12 2012] Assessing source extent using major
[Sun Jun  3 17:48:12 2012] Source does appear to be extended
[Sun Jun  3 17:48:12 2012] Computing asymmetry using major and minor axis, asym = 1.07
[Sun Jun  3 17:48:12 2012] Source is confused with source 6
[Sun Jun  3 17:48:12 2012] Source is confused with source 10
[Sun Jun  3 17:48:12 2012] Source is confused with source 18
[Mon Jun  4 09:50:16 2012] Counts = 3597.530000, rescaling region sizes by 2.000000
[Mon Jun  4 09:50:16 2012] XMMSAS src. selection expression = ellipse(27205.931800, 24885.077800, 1323.384038, 1240.056036, 67.241400, X, Y)
[Mon Jun  4 09:50:16 2012] Writing source region out to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun  4 09:50:16 2012] Extracting stamp from image fullrun_mos2_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (237, 211) - (389, 363)
[Mon Jun  4 09:50:16 2012] XMMSAS bgd. selection expression = annulus(27205.931800, 24885.077800, 4411.280127, 8822.560254, X, Y) && !ellipse(24638.376587, 19024.631760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27034.948000, 27382.948000, 1087.008031, 1087.008031, 0.000000, X, Y) && !ellipse(28307.608490, 25618.722260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.960800, 25322.491800, 1098.160032, 1098.160032, 0.000000, X, Y) && !ellipse(24417.566000, 26077.766000, 2144.104062, 2144.104062, 0.000000, X, Y) && !ellipse(26854.570000, 24620.131200, 1170.912034, 1170.912034, 0.000000, X, Y) && !ellipse(28121.119947, 27064.821886, 1034.496417, 485.450745, 0.000000, X, Y) && !ellipse(28316.490000, 24582.824000, 1197.352034, 1197.352034, 351.208000, X, Y) && !ellipse(25519.910000, 24790.060000, 2394.704069, 1040.616030, 60.379000, X, Y) && !ellipse(26190.224000, 26432.516000, 1042.528030, 1042.528030, 0.000000, X, Y) && !ellipse(24742.729160, 26752.652000, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(28391.087921, 28222.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.138000, 26353.912000, 1096.896032, 1096.896032, 0.000000, X, Y) && !ellipse(24739.259060, 27452.507800, 1146.792033, 1146.792033, 0.000000, X, Y) && !ellipse(25671.058000, 24406.302000, 2241.184064, 2241.184064, 0.000000, X, Y) && !ellipse(28996.494000, 26747.698000, 1888.880054, 1888.880054, 0.000000, X, Y) && !ellipse(23797.470800, 26545.046000, 1683.824048, 660.180819, 63.760000, X, Y) && !ellipse(24033.761800, 28269.078392, 923.240027, 923.240027, 0.000000, X, Y) && !ellipse(27011.718900, 30166.986400, 1320.512038, 680.467220, 358.671000, X, Y) && !ellipse(26523.744751, 26740.352661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29537.351685, 29268.683960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30208.059200, 28842.596400, 1371.008039, 1371.008039, 0.000000, X, Y) && !ellipse(22317.148540, 26984.946000, 409.412012, 409.412012, 0.000000, X, Y) && !ellipse(29509.934000, 27464.282000, 1256.584036, 1256.584036, 0.000000, X, Y) && !ellipse(29596.541600, 30262.070000, 1239.144036, 1239.144036, 0.000000, X, Y) && !ellipse(27313.249573, 28215.038239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.140800, 29495.400000, 2012.112058, 2012.112058, 0.000000, X, Y) && !ellipse(30095.080414, 29701.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21660.974960, 27533.386017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23936.124400, 29822.522800, 1067.168031, 1067.168031, 0.000000, X, Y) && !ellipse(27984.852000, 29410.422000, 740.175221, 740.175221, 0.000000, X, Y) && !ellipse(26104.664307, 27082.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22241.130280, 26219.096000, 990.696029, 990.696029, 0.000000, X, Y) && !ellipse(24738.874756, 19503.245926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29429.248000, 27731.190000, 1338.624039, 1338.624039, 0.000000, X, Y) && !ellipse(22277.901550, 27517.939056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21735.441000, 28608.825000, 712.168020, 712.168020, 0.000000, X, Y) && !ellipse(22192.744000, 25186.964400, 528.318415, 528.318415, 0.000000, X, Y) && !ellipse(23545.956400, 24288.480800, 846.256024, 846.256024, 0.000000, X, Y) && !ellipse(28649.605469, 29946.611176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25143.540000, 29471.122000, 1248.944036, 1248.944036, 0.000000, X, Y) && !ellipse(23962.862000, 18919.580000, 1542.136044, 1542.136044, 0.000000, X, Y) && !ellipse(24036.180400, 30327.567800, 1007.920029, 1007.920029, 0.000000, X, Y) && !ellipse(24044.522000, 23874.616000, 1180.304034, 1180.304034, 0.000000, X, Y)
[Mon Jun  4 09:50:16 2012] Writing fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src5.gif
[Mon Jun  4 09:52:35 2012] Mean detx,y = (-96.59, -2552.43) 
[Mon Jun  4 09:52:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 09:54:44 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 09:54:44 2012] Setting source spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun  4 09:54:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun  4 16:52:41 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:41 2012] Error reading totcts from fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun  4 16:52:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:44 2012] Using photon index=1.80, rate=0.1, arf fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src5.arf
[Mon Jun  4 16:52:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:44 2012] Updating source flux to 1e-12
[Mon Jun  4 17:03:06 2012] Flag c found in src. 5 procflags, skipping spectral fitting