[Sun Jun  3 03:41:30 2012] Detection parameters:
  Position = (249.5, 317.0) = 18 52 56.64 0 40 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.7 +/- 20.8
  Background counts = 47.3
  Rate = 0.007 +/- 0.0007

[Sun Jun  3 03:41:31 2012] Off-axis axis estimate = 3.79'
[Sun Jun  3 07:03:31 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:03:31 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sun Jun  3 07:03:31 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.858
[Sun Jun  3 07:03:31 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.33"
[Sun Jun  3 09:41:12 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src30.ximg exists
[Sun Jun  3 09:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src30.csv
[Sun Jun  3 09:41:12 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Jun  3 09:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src30.csv
[Sun Jun  3 09:41:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:13 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Jun  3 09:41:13 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Jun  3 09:41:13 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Jun  3 09:41:40 2012] Warning, spatial fit 30 centroid is now closest to src. 48
[Sun Jun  3 09:41:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:40 2012] Assessing source extent using major
[Sun Jun  3 09:41:40 2012] Source does appear to be extended
[Sun Jun  3 09:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:41:40 2012] Source is confused with source 48
[Sun Jun  3 14:22:35 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:22:35 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sun Jun  3 14:22:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.858
[Sun Jun  3 14:22:35 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.33"
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun  3 17:47:39 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src30 appears to have run properly
[Sun Jun  3 17:47:40 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun  3 17:47:41 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun  3 17:47:41 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jun  3 17:48:12 2012] Warning, spatial fit 30 centroid is now closest to src. 48
[Sun Jun  3 17:48:12 2012] Source 49 is offset by 5.312724 and 3.232184 pixels which is larger than
2 X fitted extent = 1.713067 x 1.713067, not incorporating fit results
[Sun Jun  3 17:48:12 2012] Source 49 is offset by 0.073505 and -8.401103 pixels which is larger than
2 X fitted extent = 2.300391 x 2.300391, not incorporating fit results
[Sun Jun  3 17:48:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:12 2012] Assessing source extent using major
[Sun Jun  3 17:48:12 2012] Source does appear to be extended
[Sun Jun  3 17:48:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 09:50:18 2012] XMMSAS src. selection expression = ellipse(21660.974960, 27533.386017, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  4 09:50:18 2012] Writing source region out to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src49_src.reg
[Mon Jun  4 09:50:18 2012] Extracting stamp from image fullrun_mos2_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (212, 280) - (287, 355)
[Mon Jun  4 09:50:18 2012] XMMSAS bgd. selection expression = annulus(21660.974960, 27533.386017, 1087.500000, 2175.000000, X, Y) && !ellipse(24417.566000, 26077.766000, 2144.104062, 2144.104062, 0.000000, X, Y) && !ellipse(25519.910000, 24790.060000, 2394.704069, 1040.616030, 60.379000, X, Y) && !ellipse(24742.729160, 26752.652000, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(24739.259060, 27452.507800, 1146.792033, 1146.792033, 0.000000, X, Y) && !ellipse(25671.058000, 24406.302000, 2241.184064, 2241.184064, 0.000000, X, Y) && !ellipse(23797.470800, 26545.046000, 1683.824048, 660.180819, 63.760000, X, Y) && !ellipse(24033.761800, 28269.078392, 923.240027, 923.240027, 0.000000, X, Y) && !ellipse(22317.148540, 26984.946000, 409.412012, 409.412012, 0.000000, X, Y) && !ellipse(23936.124400, 29822.522800, 1067.168031, 1067.168031, 0.000000, X, Y) && !ellipse(22241.130280, 26219.096000, 990.696029, 990.696029, 0.000000, X, Y) && !ellipse(22277.901550, 27517.939056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21735.441000, 28608.825000, 712.168020, 712.168020, 0.000000, X, Y) && !ellipse(22192.744000, 25186.964400, 528.318415, 528.318415, 0.000000, X, Y) && !ellipse(24036.180400, 30327.567800, 1007.920029, 1007.920029, 0.000000, X, Y)
[Mon Jun  4 09:50:18 2012] Writing fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src49.gif
[Mon Jun  4 11:01:57 2012] Mean detx,y = (5366.01, -50.61) 
[Mon Jun  4 11:01:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 11:02:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 11:02:24 2012] Setting source spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Jun  4 11:02:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon Jun  4 15:56:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  4 15:56:56 2012] rmf not generated due to insufficient counts
[Mon Jun  4 16:52:42 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:42 2012] Error reading totcts from fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Jun  4 16:52:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:45 2012] Using photon index=1.80, rate=0.00689, arf fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src49.arf
[Mon Jun  4 16:52:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:45 2012] Updating source flux to 9.3e-14
[Mon Jun  4 17:03:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting