[Sun Jun  3 03:41:30 2012] Detection parameters:
  Position = (311.2, 347.1) = 18 52 38.75 0 42 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.9 +/- 27.8
  Background counts = 88.4
  Rate = 0.01 +/- 0.0009

[Sun Jun  3 03:41:31 2012] Off-axis axis estimate = 3.65'
[Sun Jun  3 07:03:31 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:03:31 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Sun Jun  3 07:03:31 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Sun Jun  3 07:03:31 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.25"
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src20.csv
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src20.csv
[Sun Jun  3 09:41:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:13 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jun  3 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun  3 09:41:13 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jun  3 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun  3 09:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:40 2012] Warning, spatial fit 20 centroid is now closest to src. 35
[Sun Jun  3 09:41:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:40 2012] Assessing source extent using major
[Sun Jun  3 09:41:40 2012] Source does appear to be extended
[Sun Jun  3 09:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 14:22:35 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:22:35 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Sun Jun  3 14:22:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Sun Jun  3 14:22:35 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.25"
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun  3 17:47:39 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Jun  3 17:47:40 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun  3 17:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sun Jun  3 17:47:40 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun  3 17:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sun Jun  3 17:47:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 17:48:12 2012] Spatial fit model total counts = 1706.590000, observed total counts = 1663.000000
[Sun Jun  3 17:48:12 2012] Offset between fit and detection position for source 26 = 0.263825 pixels
[Sun Jun  3 17:48:12 2012] 1718.421000 total counts/ 1061.660000 bgd. counts: snr = 20.156477
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.263825 pixels
  Position = (311.0, 347.3) = 18 52 38.81 0 42 26.2
  Extent = 16.5 (16.3-33.0)" x 8.5 (7.5-9.8)", rotation angle = 359 (356-0) degrees
  Source counts = 656.8 +/- 41.5
  Background counts = 1061.7
  Rate = 0.02 +/- 0.001
[Sun Jun  3 17:48:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:12 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 17:48:12 2012] Source does appear to be extended
[Sun Jun  3 17:48:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.66
[Sun Jun  3 17:48:12 2012] Source is asymmetric
[Mon Jun  4 09:50:17 2012] XMMSAS src. selection expression = ellipse(27011.718900, 30166.986400, 990.384028, 510.350415, 358.671000, X, Y)
[Mon Jun  4 09:50:17 2012] Writing source region out to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src26_src.reg
[Mon Jun  4 09:50:17 2012] Extracting stamp from image fullrun_mos2_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (254, 290) - (368, 404)
[Mon Jun  4 09:50:17 2012] XMMSAS bgd. selection expression = annulus(27011.718900, 30166.986400, 1650.640047, 3301.280095, X, Y) && !ellipse(27034.948000, 27382.948000, 1087.008031, 1087.008031, 0.000000, X, Y) && !ellipse(24417.566000, 26077.766000, 2144.104062, 2144.104062, 0.000000, X, Y) && !ellipse(28121.119947, 27064.821886, 1034.496417, 485.450745, 0.000000, X, Y) && !ellipse(25519.910000, 24790.060000, 2394.704069, 1040.616030, 60.379000, X, Y) && !ellipse(26190.224000, 26432.516000, 1042.528030, 1042.528030, 0.000000, X, Y) && !ellipse(24742.729160, 26752.652000, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(28391.087921, 28222.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.138000, 26353.912000, 1096.896032, 1096.896032, 0.000000, X, Y) && !ellipse(24739.259060, 27452.507800, 1146.792033, 1146.792033, 0.000000, X, Y) && !ellipse(28996.494000, 26747.698000, 1888.880054, 1888.880054, 0.000000, X, Y) && !ellipse(23797.470800, 26545.046000, 1683.824048, 660.180819, 63.760000, X, Y) && !ellipse(24033.761800, 28269.078392, 923.240027, 923.240027, 0.000000, X, Y) && !ellipse(26523.744751, 26740.352661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29537.351685, 29268.683960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30208.059200, 28842.596400, 1371.008039, 1371.008039, 0.000000, X, Y) && !ellipse(29509.934000, 27464.282000, 1256.584036, 1256.584036, 0.000000, X, Y) && !ellipse(29596.541600, 30262.070000, 1239.144036, 1239.144036, 0.000000, X, Y) && !ellipse(27313.249573, 28215.038239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.140800, 29495.400000, 2012.112058, 2012.112058, 0.000000, X, Y) && !ellipse(30095.080414, 29701.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23936.124400, 29822.522800, 1067.168031, 1067.168031, 0.000000, X, Y) && !ellipse(27984.852000, 29410.422000, 740.175221, 740.175221, 0.000000, X, Y) && !ellipse(26104.664307, 27082.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29429.248000, 27731.190000, 1338.624039, 1338.624039, 0.000000, X, Y) && !ellipse(28649.605469, 29946.611176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25143.540000, 29471.122000, 1248.944036, 1248.944036, 0.000000, X, Y) && !ellipse(24036.180400, 30327.567800, 1007.920029, 1007.920029, 0.000000, X, Y)
[Mon Jun  4 09:50:17 2012] Writing fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src26.gif
[Mon Jun  4 10:45:18 2012] Mean detx,y = (115.61, 2621.62) 
[Mon Jun  4 10:45:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 10:45:39 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 10:45:39 2012] Setting source spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun  4 10:45:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Jun  4 16:52:42 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:42 2012] Error reading totcts from fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun  4 16:52:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:45 2012] Using photon index=1.80, rate=0.0183, arf fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src26.arf
[Mon Jun  4 16:52:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:45 2012] Updating source flux to 2.2e-13