[Sun Jun  3 03:41:30 2012] Detection parameters:
  Position = (335.3, 315.9) = 18 52 31.76 0 40 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.6 +/- 27.8
  Background counts = 82.2
  Rate = 0.009 +/- 0.0008

[Sun Jun  3 03:41:31 2012] Off-axis axis estimate = 2.96'
[Sun Jun  3 07:03:31 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:03:31 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jun  3 07:03:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.931
[Sun Jun  3 07:03:31 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.91"
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src25.csv
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src25.csv
[Sun Jun  3 09:41:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:13 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun  3 09:41:13 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun  3 09:41:13 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Jun  3 09:41:40 2012] Spatial fit model total counts = 2913.990000, observed total counts = 2914.000000
[Sun Jun  3 09:41:40 2012] Offset between fit and detection position for source 23 = 4.005845 pixels
[Sun Jun  3 09:41:40 2012] Warning, changing simple spatial fit ID from 25 to 17
[Sun Jun  3 09:41:40 2012] 2672.980000 total counts/ 2244.620000 bgd. counts: snr = 9.041438
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 4.005845 pixels
  Position = (338.5, 313.5) = 18 52 30.84 0 39 59.0
  Extent = 15.7 (15.6-15.7)", rotation angle = 0
  Source counts = 428.4 +/- 51.7
  Background counts = 2244.6
  Rate = 0.01 +/- 0.001
[Sun Jun  3 09:41:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:40 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 09:41:40 2012] Source does appear to be extended
[Sun Jun  3 09:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:41:40 2012] Source is confused with source 15
[Sun Jun  3 14:22:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:22:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 14:22:35 2012] Initial guess for spatial extent in simple fitting = 15.69"
[Sun Jun  3 14:22:35 2012] source mask rpix=3.6, npix_max = 67, mask sum = 81, frac = 1.201
[Sun Jun  3 14:22:35 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 15.69"
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun  3 17:47:39 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src25 appears to have run properly
[Sun Jun  3 17:47:40 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun  3 17:47:40 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun  3 17:47:40 2012] Fit fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Jun  3 17:48:12 2012] Spatial fit model total counts = 2909.740000, observed total counts = 2914.000000
[Sun Jun  3 17:48:12 2012] Offset between fit and detection position for source 23 = 3.040314 pixels
[Sun Jun  3 17:48:12 2012] Warning, changing simple spatial fit ID from 25 to 17
[Sun Jun  3 17:48:12 2012] 2357.742000 total counts/ 1946.410000 bgd. counts: snr = 9.323422
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 3.040314 pixels
  Position = (339.8, 316.2) = 18 52 30.48 0 40 11.0
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 411.3 +/- 48.6
  Background counts = 1946.4
  Rate = 0.01 +/- 0.001
[Sun Jun  3 17:48:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:12 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 17:48:12 2012] Source does appear to be extended
[Sun Jun  3 17:48:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 09:50:18 2012] XMMSAS src. selection expression = ellipse(29509.934000, 27464.282000, 942.438027, 942.438027, 0.000000, X, Y)
[Mon Jun  4 09:50:18 2012] Writing source region out to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src23_src.reg
[Mon Jun  4 09:50:18 2012] Extracting stamp from image fullrun_mos2_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (286, 262) - (394, 370)
[Mon Jun  4 09:50:18 2012] XMMSAS bgd. selection expression = annulus(29509.934000, 27464.282000, 1570.730045, 3141.460090, X, Y) && !ellipse(27034.948000, 27382.948000, 1087.008031, 1087.008031, 0.000000, X, Y) && !ellipse(27205.931800, 24885.077800, 882.256025, 826.704024, 67.241400, X, Y) && !ellipse(28307.608490, 25618.722260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24417.566000, 26077.766000, 2144.104062, 2144.104062, 0.000000, X, Y) && !ellipse(26854.570000, 24620.131200, 1170.912034, 1170.912034, 0.000000, X, Y) && !ellipse(28121.119947, 27064.821886, 1034.496417, 485.450745, 0.000000, X, Y) && !ellipse(28316.490000, 24582.824000, 1197.352034, 1197.352034, 351.208000, X, Y) && !ellipse(25519.910000, 24790.060000, 2394.704069, 1040.616030, 60.379000, X, Y) && !ellipse(26190.224000, 26432.516000, 1042.528030, 1042.528030, 0.000000, X, Y) && !ellipse(28391.087921, 28222.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.138000, 26353.912000, 1096.896032, 1096.896032, 0.000000, X, Y) && !ellipse(25671.058000, 24406.302000, 2241.184064, 2241.184064, 0.000000, X, Y) && !ellipse(28996.494000, 26747.698000, 1888.880054, 1888.880054, 0.000000, X, Y) && !ellipse(27011.718900, 30166.986400, 1320.512038, 680.467220, 358.671000, X, Y) && !ellipse(26523.744751, 26740.352661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29537.351685, 29268.683960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30208.059200, 28842.596400, 1371.008039, 1371.008039, 0.000000, X, Y) && !ellipse(29596.541600, 30262.070000, 1239.144036, 1239.144036, 0.000000, X, Y) && !ellipse(27313.249573, 28215.038239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.140800, 29495.400000, 2012.112058, 2012.112058, 0.000000, X, Y) && !ellipse(30095.080414, 29701.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27984.852000, 29410.422000, 740.175221, 740.175221, 0.000000, X, Y) && !ellipse(26104.664307, 27082.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29429.248000, 27731.190000, 1338.624039, 1338.624039, 0.000000, X, Y) && !ellipse(28649.605469, 29946.611176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25143.540000, 29471.122000, 1248.944036, 1248.944036, 0.000000, X, Y)
[Mon Jun  4 09:50:18 2012] Writing fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src23.gif
[Mon Jun  4 10:47:22 2012] Mean detx,y = (-2236.63, -89.99) 
[Mon Jun  4 10:47:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 10:47:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 10:47:37 2012] Setting source spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun  4 10:47:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jun  4 16:52:42 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:42 2012] Error reading totcts from fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun  4 16:52:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:45 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src23.arf
[Mon Jun  4 16:52:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:45 2012] Updating source flux to 1.1e-13
[Mon Jun  4 17:03:06 2012] Flag c found in src. 23 procflags, skipping spectral fitting