[Sun Jun  3 03:41:29 2012] Detection parameters:
  Position = (283.8, 219.2) = 18 52 46.72 0 33 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6051.5 +/- 109.0
  Background counts = 21.9
  Rate = 0.3 +/- 0.005

[Sun Jun  3 03:41:31 2012] Off-axis axis estimate = 5.84'
[Sun Jun  3 07:03:31 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:03:31 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sun Jun  3 07:03:31 2012] source mask rpix=2.1, npix_max = 28, mask sum = 20, frac = 0.712
[Sun Jun  3 07:03:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.35"
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 09:41:11 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 09:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 09:41:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:12 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 09:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 09:41:12 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 09:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 09:41:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:41:40 2012] Spatial fit model total counts = 5036.520000, observed total counts = 6250.000000
[Sun Jun  3 09:41:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 09:41:40 2012] Spatial fit model total counts = 4334.420000, observed total counts = 5989.000000
[Sun Jun  3 09:41:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 09:41:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:40 2012] Assessing source extent using major
[Sun Jun  3 09:41:40 2012] Source does appear to be extended
[Sun Jun  3 09:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:41:40 2012] Source is confused with source 59
[Sun Jun  3 09:41:40 2012] Source is confused with source 62
[Sun Jun  3 14:22:35 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:22:35 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sun Jun  3 14:22:35 2012] source mask rpix=2.1, npix_max = 28, mask sum = 20, frac = 0.712
[Sun Jun  3 14:22:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.35"
[Sun Jun  3 17:47:38 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 17:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 17:47:38 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 17:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 17:47:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 17:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  3 17:47:39 2012] fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 17:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  3 17:47:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 17:48:12 2012] Spatial fit model total counts = 4586.370000, observed total counts = 6250.000000
[Sun Jun  3 17:48:12 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 17:48:12 2012] Spatial fit model total counts = 4348.080000, observed total counts = 5989.000000
[Sun Jun  3 17:48:12 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 17:48:12 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 20.744084 pixels away
[Sun Jun  3 17:48:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:12 2012] Assessing source extent using major
[Sun Jun  3 17:48:12 2012] Source does appear to be extended
[Sun Jun  3 17:48:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 09:50:16 2012] Counts = 6051.496582, rescaling region sizes by 2.000000
[Mon Jun  4 09:50:16 2012] XMMSAS src. selection expression = ellipse(24638.376587, 19024.631760, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun  4 09:50:16 2012] Writing source region out to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun  4 09:50:16 2012] Extracting stamp from image fullrun_mos2_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (209, 144) - (359, 294)
[Mon Jun  4 09:50:16 2012] XMMSAS bgd. selection expression = annulus(24638.376587, 19024.631760, 4350.000000, 8700.000000, X, Y) && !ellipse(27034.948000, 27382.948000, 1087.008031, 1087.008031, 0.000000, X, Y) && !ellipse(27205.931800, 24885.077800, 882.256025, 826.704024, 67.241400, X, Y) && !ellipse(28307.608490, 25618.722260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.960800, 25322.491800, 1098.160032, 1098.160032, 0.000000, X, Y) && !ellipse(24417.566000, 26077.766000, 2144.104062, 2144.104062, 0.000000, X, Y) && !ellipse(26854.570000, 24620.131200, 1170.912034, 1170.912034, 0.000000, X, Y) && !ellipse(28121.119947, 27064.821886, 1034.496417, 485.450745, 0.000000, X, Y) && !ellipse(28316.490000, 24582.824000, 1197.352034, 1197.352034, 351.208000, X, Y) && !ellipse(25519.910000, 24790.060000, 2394.704069, 1040.616030, 60.379000, X, Y) && !ellipse(26190.224000, 26432.516000, 1042.528030, 1042.528030, 0.000000, X, Y) && !ellipse(24742.729160, 26752.652000, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(28391.087921, 28222.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.138000, 26353.912000, 1096.896032, 1096.896032, 0.000000, X, Y) && !ellipse(24739.259060, 27452.507800, 1146.792033, 1146.792033, 0.000000, X, Y) && !ellipse(25671.058000, 24406.302000, 2241.184064, 2241.184064, 0.000000, X, Y) && !ellipse(28996.494000, 26747.698000, 1888.880054, 1888.880054, 0.000000, X, Y) && !ellipse(23797.470800, 26545.046000, 1683.824048, 660.180819, 63.760000, X, Y) && !ellipse(24033.761800, 28269.078392, 923.240027, 923.240027, 0.000000, X, Y) && !ellipse(26523.744751, 26740.352661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30208.059200, 28842.596400, 1371.008039, 1371.008039, 0.000000, X, Y) && !ellipse(22317.148540, 26984.946000, 409.412012, 409.412012, 0.000000, X, Y) && !ellipse(29509.934000, 27464.282000, 1256.584036, 1256.584036, 0.000000, X, Y) && !ellipse(27313.249573, 28215.038239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.140800, 29495.400000, 2012.112058, 2012.112058, 0.000000, X, Y) && !ellipse(21660.974960, 27533.386017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26104.664307, 27082.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22241.130280, 26219.096000, 990.696029, 990.696029, 0.000000, X, Y) && !ellipse(24738.874756, 19503.245926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25237.839722, 15167.090576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29429.248000, 27731.190000, 1338.624039, 1338.624039, 0.000000, X, Y) && !ellipse(22277.901550, 27517.939056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21072.438599, 14422.291138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22192.744000, 25186.964400, 528.318415, 528.318415, 0.000000, X, Y) && !ellipse(23545.956400, 24288.480800, 846.256024, 846.256024, 0.000000, X, Y) && !ellipse(23962.862000, 18919.580000, 1542.136044, 1542.136044, 0.000000, X, Y) && !ellipse(24044.522000, 23874.616000, 1180.304034, 1180.304034, 0.000000, X, Y)
[Mon Jun  4 09:50:16 2012] Writing fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1.gif
[Mon Jun  4 09:50:23 2012] Mean detx,y = (2410.98, -8386.23) 
[Mon Jun  4 09:50:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 09:52:13 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 09:52:13 2012] Setting source spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  4 09:52:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun  4 11:12:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  4 11:12:07 2012] rmf not generated due to insufficient counts
[Mon Jun  4 16:52:41 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:41 2012] Error reading totcts from fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  4 16:52:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:43 2012] Using photon index=1.80, rate=0.299, arf fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1.arf
[Mon Jun  4 16:52:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:44 2012] Updating source flux to 4.1e-12
[Mon Jun  4 17:03:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  4 17:13:17 2012] xmm0550670401/analysis//spectral/fullrun_mos2_xmm0550670401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete