[Sun Jun  3 03:40:55 2012] Detection parameters:
  Position = (307.3, 299.2) = 18 52 39.88 0 38 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.5 +/- 24.7
  Background counts = 96.3
  Rate = 0.006 +/- 0.0007

[Sun Jun  3 03:40:55 2012] Off-axis axis estimate = 0.65'
[Sun Jun  3 04:31:14 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 04:31:14 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Sun Jun  3 04:31:14 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Sun Jun  3 04:31:14 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 6.75"
[Sun Jun  3 07:03:29 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jun  3 07:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src29.csv
[Sun Jun  3 07:03:29 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jun  3 07:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src29.csv
[Sun Jun  3 07:03:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 07:03:30 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jun  3 07:03:30 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jun  3 07:03:30 2012] Fit fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Jun  3 09:41:28 2012] Warning, spatial fit 29 centroid is now closest to src. 6
[Sun Jun  3 09:41:28 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:28 2012] Assessing source extent using major
[Sun Jun  3 09:41:28 2012] Source does appear to be extended
[Sun Jun  3 09:41:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:41:28 2012] Source is confused with source 6
[Sun Jun  3 10:50:49 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 10:50:49 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Sun Jun  3 10:50:49 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Sun Jun  3 10:50:49 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 6.75"
[Sun Jun  3 14:22:33 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src28.ximg exists
[Sun Jun  3 14:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src28.csv
[Sun Jun  3 14:22:33 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Jun  3 14:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src28.csv
[Sun Jun  3 14:22:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:22:34 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Jun  3 14:22:34 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Jun  3 14:22:34 2012] Fit fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Jun  3 17:48:01 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 17.417420 pixels away
[Sun Jun  3 17:48:01 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 32.339933 pixels away
[Sun Jun  3 17:48:01 2012] Source 36 is offset by 0.678038 and -9.675116 pixels which is larger than
2 X fitted extent = 12.608184 x 9.004874, not incorporating fit results
[Sun Jun  3 17:48:01 2012] Spatial fit model total counts = 2820.920000, observed total counts = 2818.000000
[Sun Jun  3 17:48:01 2012] Offset between fit and detection position for source 36 = 7.962565 pixels
[Sun Jun  3 17:48:01 2012] 2804.497000 total counts/ 2614.560000 bgd. counts: snr = 3.714585
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 7.962565 pixels
  Position = (313.2, 293.8) = 18 52 38.18 0 38 33.4
  Extent = 13.1 (12.2-13.5)", rotation angle = 0
  Source counts = 189.9 +/- 53.0
  Background counts = 2614.6
  Rate = 0.005 +/- 0.001
[Sun Jun  3 17:48:01 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:01 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 17:48:01 2012] Source does appear to be extended
[Sun Jun  3 17:48:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 04:30:52 2012] XMMSAS src. selection expression = ellipse(27200.636000, 25511.364000, 784.242023, 784.242023, 0.000000, X, Y)
[Mon Jun  4 04:30:52 2012] Writing source region out to fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src36_src.reg
[Mon Jun  4 04:30:52 2012] Extracting stamp from image fullrun_mos1_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (268, 249) - (358, 339)
[Mon Jun  4 04:30:52 2012] XMMSAS bgd. selection expression = annulus(27200.636000, 25511.364000, 1307.070038, 2614.140075, X, Y) && !ellipse(27059.593600, 27625.458800, 350.996810, 350.996810, 0.000000, X, Y) && !ellipse(27240.763600, 24785.393400, 2101.888060, 1091.080031, 148.857000, X, Y) && !ellipse(28673.760000, 25869.238200, 1194.936034, 1194.936034, 0.000000, X, Y) && !ellipse(25142.217800, 25461.297000, 1087.048031, 1087.048031, 0.000000, X, Y) && !ellipse(26339.378000, 24358.467600, 1131.032033, 1131.032033, 0.000000, X, Y) && !ellipse(24572.892000, 26036.880000, 2193.824063, 2193.824063, 0.000000, X, Y) && !ellipse(25394.958000, 24932.898000, 2174.096063, 2174.096063, 0.000000, X, Y) && !ellipse(26120.364000, 26347.292000, 1079.872031, 1079.872031, 0.000000, X, Y) && !ellipse(28302.048031, 27058.817140, 1228.792035, 606.210399, 26.534440, X, Y) && !ellipse(27634.455917, 27592.022003, 1186.888034, 562.772455, 72.482019, X, Y) && !ellipse(28769.734924, 26850.066437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24684.691400, 27430.538000, 1496.896043, 1496.896043, 0.000000, X, Y) && !ellipse(24045.368000, 28119.949000, 964.424028, 964.424028, 0.000000, X, Y) && !ellipse(28605.901200, 28394.254600, 1258.576036, 1258.576036, 0.000000, X, Y) && !ellipse(29168.938000, 26307.102000, 1228.792035, 1228.792035, 0.000000, X, Y) && !ellipse(30094.236000, 28885.612000, 1370.496039, 442.040013, 4.408760, X, Y) && !ellipse(29299.682000, 27339.116000, 1298.416037, 1298.416037, 0.000000, X, Y) && !ellipse(24410.083280, 24139.811400, 656.192019, 656.192019, 0.000000, X, Y) && !ellipse(24567.930695, 28921.748627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.343940, 28639.538600, 1281.320037, 799.988823, 357.323000, X, Y) && !ellipse(23827.578600, 24083.990600, 1217.952035, 1217.952035, 0.000000, X, Y) && !ellipse(29447.958000, 27816.750000, 1341.496039, 1341.496039, 0.000000, X, Y) && !ellipse(30539.658000, 28620.556000, 2511.376072, 702.150420, 46.747600, X, Y)
[Mon Jun  4 04:30:52 2012] Writing fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src36.gif
[Mon Jun  4 05:10:20 2012] Mean detx,y = (-1944.25, 2.63) 
[Mon Jun  4 05:10:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 05:10:31 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 05:10:31 2012] Setting source spectrum file to fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon Jun  4 05:10:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Mon Jun  4 16:52:37 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:37 2012] Error reading totcts from fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon Jun  4 16:52:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:40 2012] Using photon index=1.80, rate=0.00523, arf fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src36.arf
[Mon Jun  4 16:52:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:40 2012] Updating source flux to 5.2e-14
[Mon Jun  4 16:52:47 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Mon Jun  4 16:52:47 2012] Flag c found in src. 36 procflags, skipping spectral fitting