[Sun Jun  3 03:40:55 2012] Detection parameters:
  Position = (342.9, 341.1) = 18 52 29.55 0 41 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.3 +/- 26.7
  Background counts = 110.8
  Rate = 0.008 +/- 0.0008

[Sun Jun  3 03:40:55 2012] Off-axis axis estimate = 4.47'
[Sun Jun  3 04:31:14 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 04:31:14 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Sun Jun  3 04:31:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Sun Jun  3 04:31:14 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.66"
[Sun Jun  3 07:03:29 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun  3 07:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src19.csv
[Sun Jun  3 07:03:29 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun  3 07:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src19.csv
[Sun Jun  3 07:03:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 07:03:30 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun  3 07:03:30 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun  3 07:03:30 2012] Fit fullrun_mos1_xmm0550670401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jun  3 09:41:28 2012] Spatial fit model total counts = 2160.290000, observed total counts = 2205.000000
[Sun Jun  3 09:41:28 2012] Offset between fit and detection position for source 19 = 2.196851 pixels
[Sun Jun  3 09:41:28 2012] 2057.957000 total counts/ 1386.320000 bgd. counts: snr = 18.038602
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.196851 pixels
  Position = (343.1, 343.3) = 18 52 29.50 0 42 8.7
  Extent = 17.3 (17.3-17.3)", rotation angle = 0
  Source counts = 671.6 +/- 45.4
  Background counts = 1386.3
  Rate = 0.02 +/- 0.001
[Sun Jun  3 09:41:28 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 09:41:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 09:41:28 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 09:41:28 2012] Source does appear to be extended
[Sun Jun  3 09:41:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:41:28 2012] Source is confused with source 24
[Sun Jun  3 09:41:28 2012] Source is confused with source 25
[Sun Jun  3 09:41:28 2012] Source is confused with source 20
[Sun Jun  3 09:41:28 2012] Source is confused with source 18
[Sun Jun  3 10:50:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 10:50:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 10:50:49 2012] Initial guess for spatial extent in simple fitting = 17.32"
[Sun Jun  3 10:50:49 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.008
[Sun Jun  3 10:50:49 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 17.32"
[Sun Jun  3 14:22:33 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun  3 14:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src19.csv
[Sun Jun  3 14:22:33 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun  3 14:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src19.csv
[Sun Jun  3 14:22:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:22:34 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun  3 14:22:34 2012] fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun  3 14:22:34 2012] Fit fullrun_mos1_xmm0550670401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Jun  3 17:48:01 2012] Warning, spatial fit 19 centroid is now closest to src. 48
[Sun Jun  3 17:48:01 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 17:48:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 17:48:01 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 17:48:01 2012] Source does appear to be extended
[Sun Jun  3 17:48:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 04:30:52 2012] XMMSAS src. selection expression = ellipse(29804.646200, 29816.609400, 1039.494030, 1039.494030, 0.000000, X, Y)
[Mon Jun  4 04:30:52 2012] Writing source region out to fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src19_src.reg
[Mon Jun  4 04:30:52 2012] Extracting stamp from image fullrun_mos1_xmm0550670401_pi300-10000_cl_sm2.00.img.gz, (283, 284) - (403, 403)
[Mon Jun  4 04:30:52 2012] XMMSAS bgd. selection expression = annulus(29804.646200, 29816.609400, 1732.490050, 3464.980100, X, Y) && !ellipse(27059.593600, 27625.458800, 350.996810, 350.996810, 0.000000, X, Y) && !ellipse(27240.763600, 24785.393400, 2101.888060, 1091.080031, 148.857000, X, Y) && !ellipse(28673.760000, 25869.238200, 1194.936034, 1194.936034, 0.000000, X, Y) && !ellipse(24572.892000, 26036.880000, 2193.824063, 2193.824063, 0.000000, X, Y) && !ellipse(25394.958000, 24932.898000, 2174.096063, 2174.096063, 0.000000, X, Y) && !ellipse(26120.364000, 26347.292000, 1079.872031, 1079.872031, 0.000000, X, Y) && !ellipse(28302.048031, 27058.817140, 1228.792035, 606.210399, 26.534440, X, Y) && !ellipse(27634.455917, 27592.022003, 1186.888034, 562.772455, 72.482019, X, Y) && !ellipse(28769.734924, 26850.066437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.066400, 30196.142000, 829.984024, 829.984024, 0.000000, X, Y) && !ellipse(28605.901200, 28394.254600, 1258.576036, 1258.576036, 0.000000, X, Y) && !ellipse(29168.938000, 26307.102000, 1228.792035, 1228.792035, 0.000000, X, Y) && !ellipse(30192.281800, 28877.964400, 473.280814, 473.280814, 0.000000, X, Y) && !ellipse(30094.236000, 28885.612000, 1370.496039, 442.040013, 4.408760, X, Y) && !ellipse(29299.682000, 27339.116000, 1298.416037, 1298.416037, 0.000000, X, Y) && !ellipse(29346.216125, 29440.610382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27200.636000, 25511.364000, 1045.656030, 1045.656030, 0.000000, X, Y) && !ellipse(30919.343940, 28639.538600, 1281.320037, 799.988823, 357.323000, X, Y) && !ellipse(30793.577800, 29632.231600, 857.952025, 857.952025, 0.000000, X, Y) && !ellipse(29447.958000, 27816.750000, 1341.496039, 1341.496039, 0.000000, X, Y) && !ellipse(27853.292000, 30163.384000, 1911.552055, 1911.552055, 0.000000, X, Y) && !ellipse(27306.448000, 30180.682000, 1307.688038, 882.688025, 43.037100, X, Y) && !ellipse(30539.658000, 28620.556000, 2511.376072, 702.150420, 46.747600, X, Y)
[Mon Jun  4 04:30:52 2012] Writing fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src19.gif
[Mon Jun  4 05:08:01 2012] Mean detx,y = (2401.78, 2459.49) 
[Mon Jun  4 05:08:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 05:08:09 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 05:08:09 2012] Setting source spectrum file to fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jun  4 05:08:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jun  4 16:52:37 2012] Updating aperture counts using extracted products
[Mon Jun  4 16:52:37 2012] Error reading totcts from fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jun  4 16:52:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 16:52:40 2012] Using photon index=1.80, rate=0.0185, arf fullrun_mos1_xmm0550670401_pi300-10000_pass1_cl_src19.arf
[Mon Jun  4 16:52:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 16:52:40 2012] Updating source flux to 1.8e-13
[Mon Jun  4 16:52:47 2012] Flag c found in src. 19 procflags, skipping spectral fitting