[Thu Aug  2 18:09:53 2012] Detection parameters:
  Position = (315.9, 287.0) = 18 52 37.32 0 38 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1512.3 +/- 55.7
  Background counts = 254.8
  Rate = 0.07 +/- 0.003

[Thu Aug  2 18:09:53 2012] Off-axis axis estimate = 1.51'
[Thu Aug  2 18:17:46 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:17:46 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Thu Aug  2 18:17:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Thu Aug  2 18:17:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Thu Aug  2 18:40:02 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 18:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 18:40:02 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 18:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 18:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 18:40:02 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 18:40:02 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 18:40:02 2012] Fit fullrun_pn_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 01:06:43 2012] Spatial fit model total counts = 8204.440000, observed total counts = 8212.000000
[Fri Aug  3 01:06:43 2012] Offset between fit and detection position for source 1 = 4.251887 pixels
[Fri Aug  3 01:06:43 2012] 8535.170000 total counts/ 5895.000000 bgd. counts: snr = 34.386659
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.251887 pixels
  Position = (312.2, 285.0) = 18 52 38.40 0 37 51.4
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source counts = 2640.2 +/- 92.4
  Background counts = 5895.0
  Rate = 0.08 +/- 0.003
[Fri Aug  3 01:06:43 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:43 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:43 2012] Source does appear to be extended
[Fri Aug  3 01:06:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:07:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:07:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 01:07:18 2012] Initial guess for spatial extent in simple fitting = 14.37"
[Fri Aug  3 01:07:18 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.106
[Fri Aug  3 01:07:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.37"
[Fri Aug  3 01:46:05 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 01:46:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 01:46:05 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 01:46:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 01:46:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:46:05 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 01:46:05 2012] fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 01:46:05 2012] Fit fullrun_pn_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 07:53:40 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Fri Aug  3 07:53:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:40 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:40 2012] Source does appear to be extended
[Fri Aug  3 07:53:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 07:54:11 2012] Counts = 2640.170000, rescaling region sizes by 2.000000
[Fri Aug  3 07:54:11 2012] XMMSAS src. selection expression = ellipse(27109.942000, 24742.496000, 1724.208050, 1724.208050, 0.000000, X, Y)
[Fri Aug  3 07:54:11 2012] Writing source region out to fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 07:54:11 2012] Extracting stamp from image fullrun_pn_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (213, 186) - (411, 384)
[Fri Aug  3 07:54:11 2012] XMMSAS bgd. selection expression = annulus(27109.942000, 24742.496000, 5747.360165, 11494.720331, X, Y) && !ellipse(25434.614000, 25982.058000, 1059.776030, 1059.776030, 0.000000, X, Y) && !ellipse(28353.170000, 25715.650000, 1850.304053, 1850.304053, 0.000000, X, Y) && !ellipse(27046.433600, 27703.277384, 435.912013, 435.912013, 0.000000, X, Y) && !ellipse(28659.200745, 28125.109741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.188812, 26937.610718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.870000, 27410.400000, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(26563.792000, 26800.204000, 2202.064063, 2202.064063, 0.000000, X, Y) && !ellipse(26045.900000, 26396.164000, 1101.032032, 1101.032032, 0.000000, X, Y) && !ellipse(25433.308289, 25184.529388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25733.450000, 24756.976000, 1086.952031, 1086.952031, 0.000000, X, Y)
[Fri Aug  3 07:54:11 2012] Writing fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 07:56:08 2012] Mean detx,y = (31.18, 2357.63) 
[Fri Aug  3 07:56:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 07:57:33 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 07:57:34 2012] Setting source spectrum file to fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 07:57:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug  4 14:56:27 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:27 2012] Error reading totcts from fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 14:56:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:27 2012] Using photon index=1.80, rate=0.0847, arf fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 14:56:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:27 2012] Updating source flux to 2e-13
[Sat Aug  4 15:10:16 2012] Reading fit data from xmm0550670301/analysis//spectral/fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug  4 15:10:16 2012] Spectral fit parameter nH value = 1.06081e+22
[Sat Aug  4 15:10:16 2012] Spectral fit parameter PhoIndex value = 4.73883
[Sat Aug  4 15:10:16 2012] Failed to get F(0.3-8.0) from xmm0550670301/analysis//spectral/fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 15:10:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 15:10:16 2012] Using Nh = 1.1e+22, photon index=4.74, rate=0.0847, arf fullrun_pn_xmm0550670301_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 15:10:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 15:10:16 2012] Updating source flux to 1.8e-13