[Thu Aug  2 18:10:54 2012] Detection parameters:
  Position = (311.5, 319.0) = 18 52 38.59 0 40 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 994.1 +/- 40.3
  Background counts = 80.5
  Rate = 0.03 +/- 0.001

[Thu Aug  2 18:10:55 2012] Off-axis axis estimate = 1.77'
[Thu Aug  2 21:36:04 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Aug  2 21:36:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Thu Aug  2 21:36:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.31"
[Fri Aug  3 01:06:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug  3 01:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 01:06:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug  3 01:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 01:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:06:38 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug  3 01:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug  3 01:06:38 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug  3 01:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug  3 01:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:07:07 2012] Warning, spatial fit 2 centroid is now closest to src. 54
[Fri Aug  3 01:07:07 2012] Source 9 is offset by -7.187921 and 3.490666 pixels which is larger than
2 X fitted extent = 6.521701 x 6.521701, not incorporating fit results
[Fri Aug  3 01:07:07 2012] Spatial fit model total counts = 2135.940000, observed total counts = 2131.000000
[Fri Aug  3 01:07:07 2012] Offset between fit and detection position for source 9 = 0.241061 pixels
[Fri Aug  3 01:07:07 2012] Warning, changing simple spatial fit ID from 2 to 35
[Fri Aug  3 01:07:07 2012] 2118.029000 total counts/ 1693.400000 bgd. counts: snr = 10.318816
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.241061 pixels
  Position = (311.3, 319.1) = 18 52 38.64 0 40 20.2
  Extent = 3.9 (3.6-4.4)", rotation angle = 0
  Source counts = 424.6 +/- 46.0
  Background counts = 1693.4
  Rate = 0.01 +/- 0.001
[Fri Aug  3 01:07:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:07:07 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:07:07 2012] Source does appear to be extended
[Fri Aug  3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:07:07 2012] Source is confused with source 46
[Fri Aug  3 05:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 3.88"
[Fri Aug  3 05:02:33 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.161
[Fri Aug  3 05:02:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 3.88"
[Fri Aug  3 07:53:34 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug  3 07:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src2.csv
[Fri Aug  3 07:53:34 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug  3 07:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src2.csv
[Fri Aug  3 07:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug  3 07:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:54:00 2012] Warning, spatial fit 2 centroid is now closest to src. 54
[Fri Aug  3 07:54:00 2012] Spatial fit model total counts = 2134.890000, observed total counts = 2131.000000
[Fri Aug  3 07:54:00 2012] Offset between fit and detection position for source 9 = 0.009300 pixels
[Fri Aug  3 07:54:00 2012] Warning, changing simple spatial fit ID from 2 to 34
[Fri Aug  3 07:54:00 2012] 2134.191000 total counts/ 1706.840000 bgd. counts: snr = 10.343995
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.009300 pixels
  Position = (311.3, 319.1) = 18 52 38.64 0 40 20.2
  Extent = 3.9 (3.6-4.3)", rotation angle = 0
  Source counts = 427.4 +/- 46.2
  Background counts = 1706.8
  Rate = 0.01 +/- 0.002
[Fri Aug  3 07:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:54:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:54:00 2012] Source does appear to be extended
[Fri Aug  3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:05:33 2012] XMMSAS src. selection expression = ellipse(27036.748000, 27717.116000, 235.129207, 235.129207, 0.000000, X, Y)
[Sat Aug  4 09:05:33 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9_src.reg
[Sat Aug  4 09:05:33 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (298, 306) - (325, 333)
[Sat Aug  4 09:05:33 2012] XMMSAS bgd. selection expression = annulus(27036.748000, 27717.116000, 391.882011, 783.764023, X, Y) && !ellipse(28625.526400, 25806.660800, 1205.928035, 694.462420, 330.266500, X, Y) && !ellipse(25359.234000, 25132.364000, 2155.504062, 2155.504062, 0.000000, X, Y) && !ellipse(27738.170000, 25181.244000, 1900.392055, 1900.392055, 0.000000, X, Y) && !ellipse(28130.272560, 27110.091800, 941.168027, 523.092815, 0.000000, X, Y) && !ellipse(24648.562600, 26877.470000, 1842.712053, 1842.712053, 0.000000, X, Y) && !ellipse(28421.566000, 26980.886000, 1464.264042, 1464.264042, 0.000000, X, Y) && !ellipse(29217.433102, 26955.938544, 2557.504074, 1150.857791, 103.817727, X, Y) && !ellipse(28396.710000, 28133.056000, 1430.032041, 1430.032041, 0.000000, X, Y) && !ellipse(27264.689087, 26762.689423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.870331, 28296.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27936.850000, 29447.369200, 1319.968038, 1319.968038, 0.000000, X, Y)
[Sat Aug  4 09:05:33 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9.gif
[Sat Aug  4 09:06:51 2012] Mean detx,y = (55.49, 162.44) 
[Sat Aug  4 09:06:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 09:06:59 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 09:06:59 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug  4 09:06:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Aug  4 14:56:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:29 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug  4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:30 2012] Using photon index=1.80, rate=0.0139, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9.arf
[Sat Aug  4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:30 2012] Updating source flux to 2.1e-13
[Sat Aug  4 15:02:52 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Sat Aug  4 15:02:52 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Sat Aug  4 15:08:52 2012] Reading fit data from xmm0550670301/analysis//spectral/fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9_pl.csv
[Sat Aug  4 15:08:52 2012] Spectral fit parameter nH value = 2.18995e+22
[Sat Aug  4 15:08:52 2012] Spectral fit parameter PhoIndex value = 4.47562
[Sat Aug  4 15:08:52 2012] Failed to get F(0.3-8.0) from xmm0550670301/analysis//spectral/fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 15:08:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 15:08:52 2012] Using Nh = 2.2e+22, photon index=4.48, rate=0.0139, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src9.arf
[Sat Aug  4 15:08:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 15:08:53 2012] Updating source flux to 2.1e-13