[Thu Aug  2 18:10:53 2012] Detection parameters:
  Position = (323.7, 295.0) = 18 52 35.05 0 38 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 687.2 +/- 36.3
  Background counts = 63.0
  Rate = 0.02 +/- 0.001

[Thu Aug  2 18:10:55 2012] Off-axis axis estimate = 1.85'
[Thu Aug  2 21:36:04 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Aug  2 21:36:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Thu Aug  2 21:36:04 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.35"
[Fri Aug  3 01:06:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Aug  3 01:06:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Aug  3 01:06:36 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src7 appears to have run properly
[Fri Aug  3 01:06:38 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug  3 01:06:38 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug  3 01:06:38 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug  3 01:07:07 2012] Spatial fit model total counts = 3685.170000, observed total counts = 3430.000000
[Fri Aug  3 01:07:07 2012] Offset between fit and detection position for source 6 = 4.091468 pixels
[Fri Aug  3 01:07:07 2012] 3519.370000 total counts/ 2393.990000 bgd. counts: snr = 23.000540
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.091468 pixels
  Position = (327.0, 297.5) = 18 52 34.10 0 38 45.9
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source counts = 1125.4 +/- 59.3
  Background counts = 2394.0
  Rate = 0.04 +/- 0.002
[Fri Aug  3 01:07:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:07:07 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:07:07 2012] Source does appear to be extended
[Fri Aug  3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:07:07 2012] Source is confused with source 2
[Fri Aug  3 05:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:02:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 14.71"
[Fri Aug  3 05:02:33 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.930
[Fri Aug  3 05:02:33 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.71"
[Fri Aug  3 07:53:34 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src7.ximg exists
[Fri Aug  3 07:53:34 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Aug  3 07:53:34 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src7 appears to have run properly
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Aug  3 07:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:54:00 2012] Spatial fit model total counts = 4933.120000, observed total counts = 4572.000000
[Fri Aug  3 07:54:00 2012] Offset between fit and detection position for source 6 = 6.503737 pixels
[Fri Aug  3 07:54:00 2012] Warning, changing simple spatial fit ID from 7 to 3
[Fri Aug  3 07:54:00 2012] 3790.556000 total counts/ 653.946000 bgd. counts: snr = 122.656221
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 6.503737 pixels
  Position = (321.6, 293.8) = 18 52 35.67 0 38 30.1
  Extent = 28.5 (28.4-28.5)", rotation angle = 0
  Source counts = 3136.6 +/- 61.6
  Background counts = 653.9
  Rate = 0.1 +/- 0.002
[Fri Aug  3 07:54:00 2012] Spatial fit model total counts = 3704.790000, observed total counts = 3705.000000
[Fri Aug  3 07:54:00 2012] Offset between fit and detection position for source 6 = 4.420682 pixels
[Fri Aug  3 07:54:00 2012] Warning, changing simple spatial fit ID from 3 to 4
[Fri Aug  3 07:54:00 2012] 2710.010000 total counts/ 1643.990000 bgd. counts: snr = 26.291524
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.420682 pixels
  Position = (319.4, 290.0) = 18 52 36.30 0 38 13.4
  Extent = 23.8 (23.7-47.5)", rotation angle = 0
  Source counts = 1066.0 +/- 52.1
  Background counts = 1644.0
  Rate = 0.03 +/- 0.002
[Fri Aug  3 07:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:54:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:54:00 2012] Source does appear to be extended
[Fri Aug  3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:05:34 2012] Counts = 1066.020000, rescaling region sizes by 2.000000
[Sat Aug  4 09:05:34 2012] XMMSAS src. selection expression = ellipse(27738.170000, 25181.244000, 2850.588082, 2850.588082, 0.000000, X, Y)
[Sat Aug  4 09:05:34 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src6_src.reg
[Sat Aug  4 09:05:34 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (156, 126) - (483, 454)
[Sat Aug  4 09:05:34 2012] XMMSAS bgd. selection expression = annulus(27738.170000, 25181.244000, 9501.960273, 19003.920547, X, Y) && !ellipse(24598.848511, 19253.128891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27036.748000, 27717.116000, 313.505609, 313.505609, 0.000000, X, Y) && !ellipse(27377.810200, 24950.370400, 1139.736033, 1139.736033, 0.000000, X, Y) && !ellipse(28625.526400, 25806.660800, 1205.928035, 694.462420, 330.266500, X, Y) && !ellipse(25146.101200, 25626.388000, 1077.752031, 1077.752031, 0.000000, X, Y) && !ellipse(25359.234000, 25132.364000, 2155.504062, 2155.504062, 0.000000, X, Y) && !ellipse(24564.898651, 25964.887634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.515019, 24332.224268, 1196.896034, 1087.229228, 35.064656, X, Y) && !ellipse(28130.272560, 27110.091800, 941.168027, 523.092815, 0.000000, X, Y) && !ellipse(24648.562600, 26877.470000, 1842.712053, 1842.712053, 0.000000, X, Y) && !ellipse(28421.566000, 26980.886000, 1464.264042, 1464.264042, 0.000000, X, Y) && !ellipse(24254.748000, 26183.888600, 1118.672032, 1118.672032, 0.000000, X, Y) && !ellipse(24768.055000, 27345.789400, 1155.272033, 1155.272033, 0.000000, X, Y) && !ellipse(29217.433102, 26955.938544, 2557.504074, 1150.857791, 103.817727, X, Y) && !ellipse(28396.710000, 28133.056000, 1430.032041, 1430.032041, 0.000000, X, Y) && !ellipse(27265.761719, 30304.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.982000, 26404.996000, 1451.976042, 1451.976042, 0.000000, X, Y) && !ellipse(30216.492000, 28986.478000, 1071.840031, 1071.840031, 0.000000, X, Y) && !ellipse(23965.027976, 28268.765000, 885.496025, 885.496025, 0.000000, X, Y) && !ellipse(29644.738400, 29856.816000, 1382.376040, 1382.376040, 0.000000, X, Y) && !ellipse(28899.877600, 28770.509200, 715.014421, 715.014421, 0.000000, X, Y) && !ellipse(22302.511440, 27092.279400, 407.436812, 407.436812, 0.000000, X, Y) && !ellipse(23951.617560, 29748.898000, 987.768028, 987.768028, 0.000000, X, Y) && !ellipse(27024.450000, 25078.550000, 1062.520031, 1062.520031, 0.000000, X, Y) && !ellipse(21599.678280, 27651.110400, 545.646416, 545.646416, 0.000000, X, Y) && !ellipse(29674.752000, 30183.124000, 1414.264041, 1414.264041, 0.000000, X, Y) && !ellipse(24386.417000, 24372.298800, 1080.544031, 1080.544031, 0.000000, X, Y) && !ellipse(27264.689087, 26762.689423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22167.220800, 26145.370000, 831.336024, 831.336024, 0.000000, X, Y) && !ellipse(21714.122060, 28739.607000, 546.446416, 546.446416, 0.000000, X, Y) && !ellipse(28488.041626, 29449.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.870331, 28296.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27936.850000, 29447.369200, 1319.968038, 1319.968038, 0.000000, X, Y) && !ellipse(26128.931274, 35728.951691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22200.587000, 26226.662000, 880.640025, 880.640025, 0.000000, X, Y) && !ellipse(42599.971039, 21969.849121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.106800, 27055.336000, 1298.328037, 411.894412, 90.003000, X, Y) && !ellipse(24921.652283, 24411.615845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24989.776000, 29400.646000, 1247.104036, 1247.104036, 0.000000, X, Y) && !ellipse(23997.682400, 30356.112000, 1342.696039, 1342.696039, 0.000000, X, Y) && !ellipse(28825.145386, 30221.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.460449, 30726.730469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.615417, 30218.162262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.336600, 28800.300000, 1205.568035, 1205.568035, 0.000000, X, Y) && !ellipse(31067.636230, 29419.104645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35680.194733, 41499.068451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.355347, 23901.720123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.065600, 32671.218600, 1303.816038, 527.949615, 134.382000, X, Y)
[Sat Aug  4 09:05:34 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src6.gif
[Sat Aug  4 09:17:18 2012] Mean detx,y = (-163.82, -1744.67) 
[Sat Aug  4 09:17:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 09:23:08 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 09:23:08 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Aug  4 09:23:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Aug  4 14:56:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:29 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Aug  4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:30 2012] Using photon index=1.80, rate=0.0347, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src6.arf
[Sat Aug  4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:30 2012] Updating source flux to 4.8e-13
[Sat Aug  4 15:02:52 2012] Flag c found in src. 6 procflags, skipping spectral fitting