[Thu Aug 2 18:10:54 2012] Detection parameters: Position = (283.1, 332.9) = 18 52 46.83 0 41 19.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 115.2 +/- 18.9 Background counts = 77.0 Rate = 0.004 +/- 0.0007 [Thu Aug 2 18:10:55 2012] Off-axis axis estimate = 2.73' [Thu Aug 2 21:36:04 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting [Thu Aug 2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 7.79" [Thu Aug 2 21:36:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.762 [Thu Aug 2 21:36:04 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.79" [Fri Aug 3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src42.ximg exists [Fri Aug 3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src42.csv [Fri Aug 3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src42_1.ximg exists [Fri Aug 3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src42.csv [Fri Aug 3 01:06:37 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src42_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists [Fri Aug 3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists [Fri Aug 3 01:06:39 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly [Fri Aug 3 01:07:07 2012] Spatial fit model total counts = 1418.780000, observed total counts = 1423.000000 [Fri Aug 3 01:07:07 2012] Offset between fit and detection position for source 41 = 7.339968 pixels [Fri Aug 3 01:07:07 2012] 1284.954000 total counts/ 1113.070000 bgd. counts: snr = 5.151981 Spatial fit parameters: Offset between fit and detection position for source 41 = 7.339968 pixels Position = (287.8, 338.5) = 18 52 45.47 0 41 44.4 Extent = 15.6 (15.5-31.2)", rotation angle = 0 Source counts = 171.9 +/- 35.8 Background counts = 1113.1 Rate = 0.006 +/- 0.001 [Fri Aug 3 01:07:07 2012] Vigneting correction estimate = 1.000000 [Fri Aug 3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 3 01:07:07 2012] Assessing source extent using major axis lower bound [Fri Aug 3 01:07:07 2012] Source does appear to be extended [Fri Aug 3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 3 05:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Aug 3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 15.59" [Fri Aug 3 05:02:33 2012] source mask rpix=3.6, npix_max = 66, mask sum = 63, frac = 0.944 [Fri Aug 3 05:02:33 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 15.59" [Fri Aug 3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src40.ximg exists [Fri Aug 3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src40.csv [Fri Aug 3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src40_1.ximg exists [Fri Aug 3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src40.csv [Fri Aug 3 07:53:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src40_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Fri Aug 3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Fri Aug 3 07:53:36 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly [Fri Aug 3 07:54:00 2012] Source 41 is offset by 1.512368 and 3.702621 pixels which is larger than 2 X fitted extent = 1.460975 x 1.460975, not incorporating fit results [Fri Aug 3 07:54:00 2012] Warning, spatial fit 40 centroid is now closest to src. 43 [Fri Aug 3 07:54:00 2012] Vigneting correction estimate = 1.000000 [Fri Aug 3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 3 07:54:00 2012] Assessing source extent using major axis lower bound [Fri Aug 3 07:54:00 2012] Source does appear to be extended [Fri Aug 3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 3 07:54:00 2012] Source is confused with source 43 [Sat Aug 4 09:05:35 2012] XMMSAS src. selection expression = ellipse(24989.776000, 29400.646000, 935.328027, 935.328027, 0.000000, X, Y) [Sat Aug 4 09:05:35 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src41_src.reg [Sat Aug 4 09:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (234, 285) - (342, 392) [Sat Aug 4 09:05:35 2012] XMMSAS bgd. selection expression = annulus(24989.776000, 29400.646000, 1558.880045, 3117.760090, X, Y) && !ellipse(27036.748000, 27717.116000, 313.505609, 313.505609, 0.000000, X, Y) && !ellipse(28625.526400, 25806.660800, 1205.928035, 694.462420, 330.266500, X, Y) && !ellipse(25146.101200, 25626.388000, 1077.752031, 1077.752031, 0.000000, X, Y) && !ellipse(25359.234000, 25132.364000, 2155.504062, 2155.504062, 0.000000, X, Y) && !ellipse(27738.170000, 25181.244000, 1900.392055, 1900.392055, 0.000000, X, Y) && !ellipse(24564.898651, 25964.887634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.272560, 27110.091800, 941.168027, 523.092815, 0.000000, X, Y) && !ellipse(24648.562600, 26877.470000, 1842.712053, 1842.712053, 0.000000, X, Y) && !ellipse(28421.566000, 26980.886000, 1464.264042, 1464.264042, 0.000000, X, Y) && !ellipse(24254.748000, 26183.888600, 1118.672032, 1118.672032, 0.000000, X, Y) && !ellipse(24768.055000, 27345.789400, 1155.272033, 1155.272033, 0.000000, X, Y) && !ellipse(29217.433102, 26955.938544, 2557.504074, 1150.857791, 103.817727, X, Y) && !ellipse(28396.710000, 28133.056000, 1430.032041, 1430.032041, 0.000000, X, Y) && !ellipse(27265.761719, 30304.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.982000, 26404.996000, 1451.976042, 1451.976042, 0.000000, X, Y) && !ellipse(23965.027976, 28268.765000, 885.496025, 885.496025, 0.000000, X, Y) && !ellipse(22302.511440, 27092.279400, 407.436812, 407.436812, 0.000000, X, Y) && !ellipse(23951.617560, 29748.898000, 987.768028, 987.768028, 0.000000, X, Y) && !ellipse(21599.678280, 27651.110400, 545.646416, 545.646416, 0.000000, X, Y) && !ellipse(27264.689087, 26762.689423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22167.220800, 26145.370000, 831.336024, 831.336024, 0.000000, X, Y) && !ellipse(21714.122060, 28739.607000, 546.446416, 546.446416, 0.000000, X, Y) && !ellipse(28488.041626, 29449.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.870331, 28296.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27936.850000, 29447.369200, 1319.968038, 1319.968038, 0.000000, X, Y) && !ellipse(22200.587000, 26226.662000, 880.640025, 880.640025, 0.000000, X, Y) && !ellipse(22305.106800, 27055.336000, 1298.328037, 411.894412, 90.003000, X, Y) && !ellipse(23997.682400, 30356.112000, 1342.696039, 1342.696039, 0.000000, X, Y) && !ellipse(28825.145386, 30221.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.460449, 30726.730469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.615417, 30218.162262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.336600, 28800.300000, 1205.568035, 1205.568035, 0.000000, X, Y) && !ellipse(24462.065600, 32671.218600, 1303.816038, 527.949615, 134.382000, X, Y) [Sat Aug 4 09:05:35 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src41.gif [Sat Aug 4 09:34:54 2012] Mean detx,y = (2203.89, 1775.91) [Sat Aug 4 09:34:55 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 4 09:35:03 2012] Binned source spectrum to 10 counts/bin [Sat Aug 4 09:35:03 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Sat Aug 4 09:35:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src41_bgd.pi.gz [Sat Aug 4 14:56:29 2012] Updating aperture counts using extracted products [Sat Aug 4 14:56:29 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Sat Aug 4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 4 14:56:30 2012] Using photon index=1.80, rate=0.00559, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src41.arf [Sat Aug 4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 4 14:56:30 2012] Updating source flux to 5.8e-14 [Sat Aug 4 15:02:52 2012] Flag b found in src. 41 procflags, skipping spectral fitting [Sat Aug 4 15:02:52 2012] Flag c found in src. 41 procflags, skipping spectral fitting