[Thu Aug  2 18:10:54 2012] Detection parameters:
  Position = (321.8, 338.2) = 18 52 35.60 0 41 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.7 +/- 17.9
  Background counts = 75.0
  Rate = 0.005 +/- 0.0007

[Thu Aug  2 18:10:55 2012] Off-axis axis estimate = 3.34'
[Thu Aug  2 21:36:04 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu Aug  2 21:36:04 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.672
[Thu Aug  2 21:36:04 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.10"
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src36.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src36.csv
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src36.csv
[Fri Aug  3 01:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Aug  3 01:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri Aug  3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Aug  3 01:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri Aug  3 01:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:07:07 2012] Spatial fit model total counts = 1572.590000, observed total counts = 1589.000000
[Fri Aug  3 01:07:07 2012] Offset between fit and detection position for source 39 = 1.392787 pixels
[Fri Aug  3 01:07:07 2012] Warning, changing simple spatial fit ID from 36 to 34
[Fri Aug  3 01:07:07 2012] 1529.991000 total counts/ 1327.320000 bgd. counts: snr = 5.562933
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.392787 pixels
  Position = (320.9, 339.2) = 18 52 35.88 0 41 47.4
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 202.7 +/- 39.1
  Background counts = 1327.3
  Rate = 0.007 +/- 0.001
[Fri Aug  3 01:07:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:07:07 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:07:07 2012] Source does appear to be extended
[Fri Aug  3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:07:07 2012] Source is confused with source 40
[Fri Aug  3 05:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 16.50"
[Fri Aug  3 05:02:33 2012] source mask rpix=3.8, npix_max = 73, mask sum = 32, frac = 0.434
[Fri Aug  3 05:02:33 2012] Skipping simple spatial due to low active detector fraction
[Fri Aug  3 07:54:00 2012] Spatial fit model total counts = 1568.710000, observed total counts = 1589.000000
[Fri Aug  3 07:54:00 2012] Offset between fit and detection position for source 39 = 0.825276 pixels
[Fri Aug  3 07:54:00 2012] Warning, changing simple spatial fit ID from -1 to 33
[Fri Aug  3 07:54:00 2012] 1502.386000 total counts/ 1279.970000 bgd. counts: snr = 6.216789
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.825276 pixels
  Position = (321.7, 339.0) = 18 52 35.64 0 41 46.7
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 222.4 +/- 38.8
  Background counts = 1280.0
  Rate = 0.007 +/- 0.001
[Fri Aug  3 07:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:54:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:54:00 2012] Source does appear to be extended
[Fri Aug  3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:05:35 2012] XMMSAS src. selection expression = ellipse(27936.850000, 29447.369200, 989.976028, 989.976028, 0.000000, X, Y)
[Sat Aug  4 09:05:35 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src39_src.reg
[Sat Aug  4 09:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (265, 282) - (379, 396)
[Sat Aug  4 09:05:35 2012] XMMSAS bgd. selection expression = annulus(27936.850000, 29447.369200, 1649.960047, 3299.920095, X, Y) && !ellipse(27036.748000, 27717.116000, 313.505609, 313.505609, 0.000000, X, Y) && !ellipse(28625.526400, 25806.660800, 1205.928035, 694.462420, 330.266500, X, Y) && !ellipse(25146.101200, 25626.388000, 1077.752031, 1077.752031, 0.000000, X, Y) && !ellipse(25359.234000, 25132.364000, 2155.504062, 2155.504062, 0.000000, X, Y) && !ellipse(27738.170000, 25181.244000, 1900.392055, 1900.392055, 0.000000, X, Y) && !ellipse(24564.898651, 25964.887634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.272560, 27110.091800, 941.168027, 523.092815, 0.000000, X, Y) && !ellipse(24648.562600, 26877.470000, 1842.712053, 1842.712053, 0.000000, X, Y) && !ellipse(28421.566000, 26980.886000, 1464.264042, 1464.264042, 0.000000, X, Y) && !ellipse(24254.748000, 26183.888600, 1118.672032, 1118.672032, 0.000000, X, Y) && !ellipse(24768.055000, 27345.789400, 1155.272033, 1155.272033, 0.000000, X, Y) && !ellipse(29217.433102, 26955.938544, 2557.504074, 1150.857791, 103.817727, X, Y) && !ellipse(28396.710000, 28133.056000, 1430.032041, 1430.032041, 0.000000, X, Y) && !ellipse(27265.761719, 30304.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.982000, 26404.996000, 1451.976042, 1451.976042, 0.000000, X, Y) && !ellipse(30216.492000, 28986.478000, 1071.840031, 1071.840031, 0.000000, X, Y) && !ellipse(23965.027976, 28268.765000, 885.496025, 885.496025, 0.000000, X, Y) && !ellipse(29644.738400, 29856.816000, 1382.376040, 1382.376040, 0.000000, X, Y) && !ellipse(28899.877600, 28770.509200, 715.014421, 715.014421, 0.000000, X, Y) && !ellipse(23951.617560, 29748.898000, 987.768028, 987.768028, 0.000000, X, Y) && !ellipse(29674.752000, 30183.124000, 1414.264041, 1414.264041, 0.000000, X, Y) && !ellipse(27264.689087, 26762.689423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.041626, 29449.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.870331, 28296.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24989.776000, 29400.646000, 1247.104036, 1247.104036, 0.000000, X, Y) && !ellipse(23997.682400, 30356.112000, 1342.696039, 1342.696039, 0.000000, X, Y) && !ellipse(28825.145386, 30221.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.460449, 30726.730469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.615417, 30218.162262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.336600, 28800.300000, 1205.568035, 1205.568035, 0.000000, X, Y) && !ellipse(31067.636230, 29419.104645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.065600, 32671.218600, 1303.816038, 527.949615, 134.382000, X, Y)
[Sat Aug  4 09:05:35 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src39.gif
[Sat Aug  4 09:33:23 2012] Mean detx,y = (-914.82, 1875.46) 
[Sat Aug  4 09:33:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 09:33:32 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 09:33:32 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Aug  4 09:33:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Aug  4 14:56:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:29 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Aug  4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:30 2012] Using photon index=1.80, rate=0.00723, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src39.arf
[Sat Aug  4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:30 2012] Updating source flux to 7.3e-14
[Sat Aug  4 15:02:52 2012] Flag c found in src. 39 procflags, skipping spectral fitting