[Thu Aug  2 18:10:54 2012] Detection parameters:
  Position = (276.4, 352.0) = 18 52 48.78 0 42 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.1 +/- 16.9
  Background counts = 53.7
  Rate = 0.004 +/- 0.0007

[Thu Aug  2 18:10:55 2012] Off-axis axis estimate = 4.20'
[Thu Aug  2 21:36:04 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Thu Aug  2 21:36:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.826
[Thu Aug  2 21:36:04 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.53"
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src43.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src43.csv
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src43.csv
[Fri Aug  3 01:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Aug  3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Aug  3 01:06:39 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Aug  3 01:07:07 2012] Spatial fit model total counts = 744.921000, observed total counts = 744.000000
[Fri Aug  3 01:07:07 2012] Offset between fit and detection position for source 34 = 2.519990 pixels
[Fri Aug  3 01:07:07 2012] 757.174000 total counts/ 459.093000 bgd. counts: snr = 13.911820
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.519990 pixels
  Position = (276.4, 349.5) = 18 52 48.77 0 42 32.1
  Extent = 16.8 (16.2-17.1)", rotation angle = 0
  Source counts = 298.1 +/- 27.5
  Background counts = 459.1
  Rate = 0.01 +/- 0.0009
[Fri Aug  3 01:07:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:07:07 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:07:07 2012] Source does appear to be extended
[Fri Aug  3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:07:07 2012] Source is confused with source 24
[Fri Aug  3 05:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 16.78"
[Fri Aug  3 05:02:33 2012] source mask rpix=3.9, npix_max = 75, mask sum = 81, frac = 1.066
[Fri Aug  3 05:02:33 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 16.78"
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src41.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src41.csv
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src41.csv
[Fri Aug  3 07:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Aug  3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Aug  3 07:53:36 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Aug  3 07:54:00 2012] Warning, spatial fit 41 centroid is now closest to src. 24
[Fri Aug  3 07:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:54:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:54:00 2012] Source does appear to be extended
[Fri Aug  3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:05:35 2012] XMMSAS src. selection expression = ellipse(23997.682400, 30356.112000, 1007.022029, 1007.022029, 0.000000, X, Y)
[Sat Aug  4 09:05:35 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src34_src.reg
[Sat Aug  4 09:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (219, 292) - (334, 407)
[Sat Aug  4 09:05:35 2012] XMMSAS bgd. selection expression = annulus(23997.682400, 30356.112000, 1678.370048, 3356.740097, X, Y) && !ellipse(27036.748000, 27717.116000, 313.505609, 313.505609, 0.000000, X, Y) && !ellipse(25359.234000, 25132.364000, 2155.504062, 2155.504062, 0.000000, X, Y) && !ellipse(27738.170000, 25181.244000, 1900.392055, 1900.392055, 0.000000, X, Y) && !ellipse(28130.272560, 27110.091800, 941.168027, 523.092815, 0.000000, X, Y) && !ellipse(24648.562600, 26877.470000, 1842.712053, 1842.712053, 0.000000, X, Y) && !ellipse(28421.566000, 26980.886000, 1464.264042, 1464.264042, 0.000000, X, Y) && !ellipse(24254.748000, 26183.888600, 1118.672032, 1118.672032, 0.000000, X, Y) && !ellipse(24768.055000, 27345.789400, 1155.272033, 1155.272033, 0.000000, X, Y) && !ellipse(29217.433102, 26955.938544, 2557.504074, 1150.857791, 103.817727, X, Y) && !ellipse(28396.710000, 28133.056000, 1430.032041, 1430.032041, 0.000000, X, Y) && !ellipse(27265.761719, 30304.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.982000, 26404.996000, 1451.976042, 1451.976042, 0.000000, X, Y) && !ellipse(23965.027976, 28268.765000, 885.496025, 885.496025, 0.000000, X, Y) && !ellipse(22302.511440, 27092.279400, 407.436812, 407.436812, 0.000000, X, Y) && !ellipse(23951.617560, 29748.898000, 987.768028, 987.768028, 0.000000, X, Y) && !ellipse(21599.678280, 27651.110400, 545.646416, 545.646416, 0.000000, X, Y) && !ellipse(27264.689087, 26762.689423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21714.122060, 28739.607000, 546.446416, 546.446416, 0.000000, X, Y) && !ellipse(26768.870331, 28296.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27936.850000, 29447.369200, 1319.968038, 1319.968038, 0.000000, X, Y) && !ellipse(22200.587000, 26226.662000, 880.640025, 880.640025, 0.000000, X, Y) && !ellipse(22305.106800, 27055.336000, 1298.328037, 411.894412, 90.003000, X, Y) && !ellipse(24989.776000, 29400.646000, 1247.104036, 1247.104036, 0.000000, X, Y) && !ellipse(27839.460449, 30726.730469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.615417, 30218.162262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.336600, 28800.300000, 1205.568035, 1205.568035, 0.000000, X, Y) && !ellipse(24462.065600, 32671.218600, 1303.816038, 527.949615, 134.382000, X, Y)
[Sat Aug  4 09:05:35 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src34.gif
[Sat Aug  4 09:35:05 2012] Mean detx,y = (3031.89, 2697.88) 
[Sat Aug  4 09:35:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 09:35:13 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 09:35:13 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Aug  4 09:35:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Aug  4 14:56:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:30 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Aug  4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:30 2012] Using photon index=1.80, rate=0.00969, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src34.arf
[Sat Aug  4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:30 2012] Updating source flux to 1.2e-13
[Sat Aug  4 15:02:52 2012] Flag c found in src. 34 procflags, skipping spectral fitting