[Thu Aug  2 18:10:54 2012] Detection parameters:
  Position = (327.0, 324.0) = 18 52 34.08 0 40 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.8 +/- 27.9
  Background counts = 76.9
  Rate = 0.01 +/- 0.001

[Thu Aug  2 18:10:55 2012] Off-axis axis estimate = 2.78'
[Thu Aug  2 21:36:04 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Thu Aug  2 21:36:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758
[Thu Aug  2 21:36:04 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.82"
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src17.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src17.csv
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src17.csv
[Fri Aug  3 01:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:06:38 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Aug  3 01:06:38 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Aug  3 01:06:38 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Aug  3 01:07:07 2012] Spatial fit model total counts = 2406.890000, observed total counts = 2320.000000
[Fri Aug  3 01:07:07 2012] Offset between fit and detection position for source 18 = 0.129197 pixels
[Fri Aug  3 01:07:07 2012] 2365.513000 total counts/ 2171.940000 bgd. counts: snr = 4.153564
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.129197 pixels
  Position = (327.1, 324.1) = 18 52 34.07 0 40 41.6
  Extent = 11.6 (7.2-15.6)", rotation angle = 0
  Source counts = 193.6 +/- 48.6
  Background counts = 2171.9
  Rate = 0.006 +/- 0.002
[Fri Aug  3 01:07:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:07:07 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:07:07 2012] Source does appear to be extended
[Fri Aug  3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 05:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Fri Aug  3 05:02:33 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.895
[Fri Aug  3 05:02:33 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.62"
[Fri Aug  3 07:53:34 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src17.ximg exists
[Fri Aug  3 07:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src17.csv
[Fri Aug  3 07:53:34 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Aug  3 07:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src17.csv
[Fri Aug  3 07:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Aug  3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Aug  3 07:53:36 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Aug  3 07:54:00 2012] Warning, spatial fit 17 centroid is now closest to src. 40
[Fri Aug  3 07:54:00 2012] Spatial fit model total counts = 1979.770000, observed total counts = 1985.000000
[Fri Aug  3 07:54:00 2012] Offset between fit and detection position for source 18 = 0.200349 pixels
[Fri Aug  3 07:54:00 2012] Warning, changing simple spatial fit ID from 17 to 23
[Fri Aug  3 07:54:00 2012] 2014.312000 total counts/ 1659.980000 bgd. counts: snr = 8.696789
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.200349 pixels
  Position = (327.0, 323.9) = 18 52 34.11 0 40 41.0
  Extent = 17.9 (17.8-35.8)", rotation angle = 0
  Source counts = 354.3 +/- 44.9
  Background counts = 1660.0
  Rate = 0.01 +/- 0.001
[Fri Aug  3 07:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:54:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:54:00 2012] Source does appear to be extended
[Fri Aug  3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 07:54:00 2012] Source is confused with source 14
[Fri Aug  3 07:54:00 2012] Source is confused with source 17
[Fri Aug  3 07:54:00 2012] Source is confused with source 25
[Sat Aug  4 09:05:34 2012] XMMSAS src. selection expression = ellipse(28396.710000, 28133.056000, 1072.524031, 1072.524031, 0.000000, X, Y)
[Sat Aug  4 09:05:34 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src18_src.reg
[Sat Aug  4 09:05:34 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (265, 262) - (389, 386)
[Sat Aug  4 09:05:34 2012] XMMSAS bgd. selection expression = annulus(28396.710000, 28133.056000, 1787.540051, 3575.080103, X, Y) && !ellipse(27036.748000, 27717.116000, 313.505609, 313.505609, 0.000000, X, Y) && !ellipse(27377.810200, 24950.370400, 1139.736033, 1139.736033, 0.000000, X, Y) && !ellipse(28625.526400, 25806.660800, 1205.928035, 694.462420, 330.266500, X, Y) && !ellipse(25146.101200, 25626.388000, 1077.752031, 1077.752031, 0.000000, X, Y) && !ellipse(25359.234000, 25132.364000, 2155.504062, 2155.504062, 0.000000, X, Y) && !ellipse(27738.170000, 25181.244000, 1900.392055, 1900.392055, 0.000000, X, Y) && !ellipse(24564.898651, 25964.887634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.515019, 24332.224268, 1196.896034, 1087.229228, 35.064656, X, Y) && !ellipse(28130.272560, 27110.091800, 941.168027, 523.092815, 0.000000, X, Y) && !ellipse(24648.562600, 26877.470000, 1842.712053, 1842.712053, 0.000000, X, Y) && !ellipse(28421.566000, 26980.886000, 1464.264042, 1464.264042, 0.000000, X, Y) && !ellipse(24254.748000, 26183.888600, 1118.672032, 1118.672032, 0.000000, X, Y) && !ellipse(24768.055000, 27345.789400, 1155.272033, 1155.272033, 0.000000, X, Y) && !ellipse(29217.433102, 26955.938544, 2557.504074, 1150.857791, 103.817727, X, Y) && !ellipse(27265.761719, 30304.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.982000, 26404.996000, 1451.976042, 1451.976042, 0.000000, X, Y) && !ellipse(30216.492000, 28986.478000, 1071.840031, 1071.840031, 0.000000, X, Y) && !ellipse(23965.027976, 28268.765000, 885.496025, 885.496025, 0.000000, X, Y) && !ellipse(29644.738400, 29856.816000, 1382.376040, 1382.376040, 0.000000, X, Y) && !ellipse(28899.877600, 28770.509200, 715.014421, 715.014421, 0.000000, X, Y) && !ellipse(23951.617560, 29748.898000, 987.768028, 987.768028, 0.000000, X, Y) && !ellipse(27024.450000, 25078.550000, 1062.520031, 1062.520031, 0.000000, X, Y) && !ellipse(29674.752000, 30183.124000, 1414.264041, 1414.264041, 0.000000, X, Y) && !ellipse(24386.417000, 24372.298800, 1080.544031, 1080.544031, 0.000000, X, Y) && !ellipse(27264.689087, 26762.689423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.041626, 29449.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.870331, 28296.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27936.850000, 29447.369200, 1319.968038, 1319.968038, 0.000000, X, Y) && !ellipse(24921.652283, 24411.615845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24989.776000, 29400.646000, 1247.104036, 1247.104036, 0.000000, X, Y) && !ellipse(23997.682400, 30356.112000, 1342.696039, 1342.696039, 0.000000, X, Y) && !ellipse(28825.145386, 30221.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.460449, 30726.730469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.615417, 30218.162262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.336600, 28800.300000, 1205.568035, 1205.568035, 0.000000, X, Y) && !ellipse(31067.636230, 29419.104645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.355347, 23901.720123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.065600, 32671.218600, 1303.816038, 527.949615, 134.382000, X, Y)
[Sat Aug  4 09:05:34 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src18.gif
[Sat Aug  4 09:30:15 2012] Mean detx,y = (-1287.67, 466.49) 
[Sat Aug  4 09:30:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 09:30:28 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 09:30:28 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug  4 09:30:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Aug  4 14:56:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:29 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug  4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:30 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src18.arf
[Sat Aug  4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:30 2012] Updating source flux to 1.1e-13
[Sat Aug  4 15:02:52 2012] Flag c found in src. 18 procflags, skipping spectral fitting