[Thu Aug  2 18:10:54 2012] Detection parameters:
  Position = (490.2, 253.1) = 18 51 46.76 0 35 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 14.7
  Background counts = 9.9
  Rate = 0.004 +/- 0.0005

[Thu Aug  2 18:10:55 2012] Off-axis axis estimate = 14.29'
[Thu Aug  2 21:36:04 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 21:36:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 21:36:04 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Thu Aug  2 21:36:04 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.068
[Thu Aug  2 21:36:04 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.57"
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src39.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src39.csv
[Fri Aug  3 01:06:37 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Aug  3 01:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src39.csv
[Fri Aug  3 01:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Aug  3 01:06:39 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Aug  3 01:06:39 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Aug  3 01:07:07 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 17.231341 pixels away
[Fri Aug  3 01:07:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:07:07 2012] Assessing source extent using major
[Fri Aug  3 01:07:07 2012] Source does appear to be extended
[Fri Aug  3 01:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 05:02:33 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:02:33 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Fri Aug  3 05:02:33 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.068
[Fri Aug  3 05:02:33 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 13.57"
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src37.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src37.csv
[Fri Aug  3 07:53:35 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Aug  3 07:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src37.csv
[Fri Aug  3 07:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Aug  3 07:53:36 2012] fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Aug  3 07:53:36 2012] Fit fullrun_mos2_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Aug  3 07:54:00 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 18.174049 pixels away
[Fri Aug  3 07:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:54:00 2012] Assessing source extent using major
[Fri Aug  3 07:54:00 2012] Source does appear to be extended
[Fri Aug  3 07:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:05:35 2012] XMMSAS src. selection expression = ellipse(42599.971039, 21969.849121, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug  4 09:05:35 2012] Writing source region out to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src16_src.reg
[Sat Aug  4 09:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (453, 216) - (528, 291)
[Sat Aug  4 09:05:35 2012] XMMSAS bgd. selection expression = annulus(42599.971039, 21969.849121, 1087.500000, 2175.000000, X, Y)
[Sat Aug  4 09:05:35 2012] Writing fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src16.gif
[Sat Aug  4 09:34:08 2012] Mean detx,y = (-15446.73, -5662.51) 
[Sat Aug  4 09:34:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 09:34:18 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 09:34:18 2012] Setting source spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Aug  4 09:34:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Aug  4 14:35:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug  4 14:35:27 2012] rmf not generated due to insufficient counts
[Sat Aug  4 14:56:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:29 2012] Error reading totcts from fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Aug  4 14:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:30 2012] Using photon index=1.80, rate=0.00444, arf fullrun_mos2_xmm0550670301_pi300-10000_pass1_cl_src16.arf
[Sat Aug  4 14:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:30 2012] Updating source flux to 1.1e-13
[Sat Aug  4 15:02:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting