[Thu Aug  2 18:10:23 2012] Detection parameters:
  Position = (328.0, 296.1) = 18 52 33.80 0 38 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 833.9 +/- 37.6
  Background counts = 61.0
  Rate = 0.03 +/- 0.001

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 2.15'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Aug  2 18:40:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.50"
[Thu Aug  2 21:36:01 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug  2 21:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src3.csv
[Thu Aug  2 21:36:01 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug  2 21:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src3.csv
[Thu Aug  2 21:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug  2 21:36:02 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 3305.570000, observed total counts = 3332.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 9 = 3.263669 pixels
[Fri Aug  3 01:06:54 2012] 3194.560000 total counts/ 2113.440000 bgd. counts: snr = 23.516839
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.263669 pixels
  Position = (330.4, 298.4) = 18 52 33.12 0 38 49.9
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 1081.1 +/- 56.5
  Background counts = 2113.4
  Rate = 0.04 +/- 0.002
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 15.01"
[Fri Aug  3 01:46:05 2012] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.025
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 15.01"
[Fri Aug  3 05:02:31 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug  3 05:02:31 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug  3 05:02:31 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug  3 05:02:32 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 4390.770000, observed total counts = 4399.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 9 = 3.515872 pixels
[Fri Aug  3 07:53:51 2012] 4134.820000 total counts/ 2352.250000 bgd. counts: snr = 36.754021
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.515872 pixels
  Position = (327.2, 296.9) = 18 52 34.05 0 38 43.6
  Extent = 18.3 (15.7-20.6)", rotation angle = 0
  Source counts = 1782.6 +/- 64.3
  Background counts = 2352.2
  Rate = 0.06 +/- 0.002
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 00:08:35 2012] Counts = 1782.570000, rescaling region sizes by 2.000000
[Sat Aug  4 00:08:35 2012] XMMSAS src. selection expression = ellipse(28415.272000, 25784.671200, 2194.440063, 2194.440063, 0.000000, X, Y)
[Sat Aug  4 00:08:35 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src9_src.reg
[Sat Aug  4 00:08:35 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (201, 171) - (453, 423)
[Sat Aug  4 00:08:35 2012] XMMSAS bgd. selection expression = annulus(28415.272000, 25784.671200, 7314.800210, 14629.600421, X, Y) && !ellipse(27035.790200, 27692.351920, 351.924010, 351.924010, 0.000000, X, Y) && !ellipse(27347.849400, 24879.436800, 1144.080033, 731.349621, 157.031968, X, Y) && !ellipse(25072.575000, 25654.594600, 1271.696037, 1271.696037, 0.000000, X, Y) && !ellipse(26576.552000, 24482.811100, 2247.488065, 2247.488065, 0.000000, X, Y) && !ellipse(24695.555000, 26105.650000, 2228.704064, 2228.704064, 0.000000, X, Y) && !ellipse(25906.994000, 24321.604000, 2291.792066, 2291.792066, 0.000000, X, Y) && !ellipse(25674.414000, 26224.107200, 1055.112030, 1055.112030, 0.000000, X, Y) && !ellipse(24850.104000, 26709.874000, 696.620020, 696.620020, 0.000000, X, Y) && !ellipse(28174.925652, 27102.838524, 1191.976034, 521.589062, 15.502630, X, Y) && !ellipse(24525.852400, 27339.798000, 1147.808033, 1147.808033, 0.000000, X, Y) && !ellipse(26409.902000, 26789.730000, 427.956012, 427.956012, 0.000000, X, Y) && !ellipse(27363.210000, 27650.078000, 2442.816070, 2442.816070, 0.000000, X, Y) && !ellipse(23984.387200, 28284.769000, 974.920028, 974.920028, 0.000000, X, Y) && !ellipse(23666.031400, 26764.320000, 805.416023, 805.416023, 0.000000, X, Y) && !ellipse(28499.272000, 28296.116000, 1312.640038, 1312.640038, 0.000000, X, Y) && !ellipse(29144.772400, 27018.677160, 1261.640036, 1261.640036, 0.000000, X, Y) && !ellipse(27310.318600, 30251.166200, 820.296024, 820.296024, 0.000000, X, Y) && !ellipse(22248.485200, 27028.356000, 438.836813, 438.836813, 0.000000, X, Y) && !ellipse(30197.581400, 28838.562000, 1373.192040, 989.016028, 22.192100, X, Y) && !ellipse(29454.923645, 29454.910370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.714200, 29867.932000, 1116.872032, 1116.872032, 0.000000, X, Y) && !ellipse(26777.507400, 30169.183000, 1319.944038, 1319.944038, 0.000000, X, Y) && !ellipse(25386.255859, 27168.534546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24082.402000, 24045.108000, 1178.760034, 1178.760034, 0.000000, X, Y) && !ellipse(22192.590400, 26501.970000, 659.184819, 659.184819, 0.000000, X, Y) && !ellipse(29437.380000, 27523.006000, 1326.784038, 1326.784038, 0.000000, X, Y) && !ellipse(27958.992720, 29473.291600, 599.696017, 599.696017, 0.000000, X, Y) && !ellipse(26154.695320, 35738.478400, 427.756012, 427.756012, 0.000000, X, Y) && !ellipse(28166.138000, 28000.186000, 2152.408062, 2152.408062, 0.000000, X, Y) && !ellipse(24026.507000, 27403.330000, 1949.840056, 920.208026, 0.361995, X, Y) && !ellipse(21911.536000, 28076.630000, 1361.592039, 1300.968037, 219.184000, X, Y) && !ellipse(30993.998993, 29079.993683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.449036, 30636.963928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.893600, 24272.750600, 1216.872035, 622.113618, 30.863200, X, Y) && !ellipse(21681.677551, 28566.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25949.289337, 27160.388916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.337662, 27114.358673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29853.292206, 28037.645111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.808280, 30395.472000, 1376.624040, 808.776023, 290.700000, X, Y) && !ellipse(30796.122600, 28730.192400, 1457.208042, 1457.208042, 0.000000, X, Y) && !ellipse(29348.958000, 30171.444800, 1386.488040, 1386.488040, 0.000000, X, Y) && !ellipse(30917.750800, 28469.132000, 728.604821, 728.604821, 0.000000, X, Y)
[Sat Aug  4 00:08:35 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src9.gif
[Sat Aug  4 00:09:06 2012] Mean detx,y = (-1294.38, 756.67) 
[Sat Aug  4 00:09:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 00:13:26 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 00:13:26 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug  4 00:13:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug  4 14:56:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:28 2012] Using photon index=1.80, rate=0.058, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src9.arf
[Sat Aug  4 14:56:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:28 2012] Updating source flux to 5.2e-13