[Thu Aug  2 18:10:24 2012] Detection parameters:
  Position = (301.2, 411.3) = 18 52 41.58 0 47 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.2 +/- 13.8
  Background counts = 16.7
  Rate = 0.005 +/- 0.0007

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 8.18'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Thu Aug  2 18:40:02 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.52"
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src31.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src31.csv
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src31.csv
[Thu Aug  2 21:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Aug  2 21:36:03 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 293.000000, observed total counts = 293.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 55 = 0.094384 pixels
[Fri Aug  3 01:06:54 2012] 291.474800 total counts/ 218.091000 bgd. counts: snr = 4.969141
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.094384 pixels
  Position = (301.2, 411.3) = 18 52 41.58 0 47 1.2
  Extent = 5.3 (3.9-7.6)", rotation angle = 0
  Source counts = 73.4 +/- 17.1
  Background counts = 218.1
  Rate = 0.002 +/- 0.0006
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Fri Aug  3 01:46:05 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.003
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 5.35"
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src29.ximg exists
[Fri Aug  3 05:02:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src29.csv
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Aug  3 05:02:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src29.csv
[Fri Aug  3 05:02:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Aug  3 05:02:33 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 293.000000, observed total counts = 293.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 55 = 0.000005 pixels
[Fri Aug  3 07:53:51 2012] 291.476200 total counts/ 218.094000 bgd. counts: snr = 4.968999
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.000005 pixels
  Position = (301.2, 411.3) = 18 52 41.58 0 47 1.2
  Extent = 5.3 (3.9-7.5)", rotation angle = 0
  Source counts = 73.4 +/- 17.1
  Background counts = 218.1
  Rate = 0.002 +/- 0.0006
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 00:08:36 2012] XMMSAS src. selection expression = ellipse(26154.695320, 35738.478400, 320.817009, 320.817009, 0.000000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src55_src.reg
[Sat Aug  4 00:08:36 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (283, 393) - (320, 430)
[Sat Aug  4 00:08:36 2012] XMMSAS bgd. selection expression = annulus(26154.695320, 35738.478400, 534.695015, 1069.390031, X, Y)
[Sat Aug  4 00:08:36 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src55.gif
[Sat Aug  4 00:51:15 2012] Mean detx,y = (8409.50, -1029.86) 
[Sat Aug  4 00:51:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 00:51:23 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 00:51:24 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Aug  4 00:51:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Aug  4 07:46:15 2012] Not generating rmf since there are only 73 counts
[Sat Aug  4 07:46:15 2012] rmf not generated due to insufficient counts
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Aug  4 14:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:29 2012] Using photon index=1.80, rate=0.00239, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src55.arf
[Sat Aug  4 14:56:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:29 2012] Updating source flux to 4.4e-14
[Sat Aug  4 14:56:31 2012] Source 55 has fewer than 100.000000 counts, skipping spectral fitting