[Thu Aug  2 18:10:24 2012] Detection parameters:
  Position = (249.0, 323.0) = 18 52 56.71 0 40 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 16.8
  Background counts = 37.0
  Rate = 0.005 +/- 0.0007

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 4.00'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Thu Aug  2 18:40:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.673
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.43"
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src34.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src34.csv
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src34.csv
[Thu Aug  2 21:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu Aug  2 21:36:03 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Aug  3 01:06:54 2012] Warning, spatial fit 34 centroid is now closest to src. 41
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 662.390000, observed total counts = 662.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 43 = 3.536256 pixels
[Fri Aug  3 01:06:54 2012] Warning, changing simple spatial fit ID from 34 to 41
[Fri Aug  3 01:06:54 2012] 615.507000 total counts/ 325.964000 bgd. counts: snr = 16.037189
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.536256 pixels
  Position = (251.4, 325.7) = 18 52 56.03 0 40 48.5
  Extent = 17.0 (16.8-34.0)", rotation angle = 0
  Source counts = 289.5 +/- 24.8
  Background counts = 326.0
  Rate = 0.009 +/- 0.0008
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:06:55 2012] Source is confused with source 46
[Fri Aug  3 01:06:55 2012] Source is confused with source 41
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 17.02"
[Fri Aug  3 01:46:05 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.040
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 17.02"
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src32.ximg exists
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Aug  3 05:02:32 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src32 appears to have run properly
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Aug  3 05:02:33 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Aug  3 07:53:51 2012] Warning, spatial fit 32 centroid is now closest to src. 41
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 658.797000, observed total counts = 662.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 43 = 2.598920 pixels
[Fri Aug  3 07:53:51 2012] Warning, changing simple spatial fit ID from 32 to 38
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.598920 pixels
  Position = (252.4, 323.3) = 18 52 55.73 0 40 38.2
  Extent = 17.0 (15.8-34.0)" x 16.3 (14.8-17.0)", rotation angle = 219
  Source counts = 345.9 +/- 18.6
  Background counts = 0.0
  Rate = 0.01 +/- 0.0006
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Sat Aug  4 00:08:36 2012] XMMSAS src. selection expression = ellipse(21911.536000, 28076.630000, 1021.194029, 975.726028, 219.184000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src43_src.reg
[Sat Aug  4 00:08:36 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (194, 265) - (311, 382)
[Sat Aug  4 00:08:36 2012] XMMSAS bgd. selection expression = annulus(21911.536000, 28076.630000, 1701.990049, 3403.980098, X, Y) && !ellipse(25072.575000, 25654.594600, 1271.696037, 1271.696037, 0.000000, X, Y) && !ellipse(26576.552000, 24482.811100, 2247.488065, 2247.488065, 0.000000, X, Y) && !ellipse(24695.555000, 26105.650000, 2228.704064, 2228.704064, 0.000000, X, Y) && !ellipse(25906.994000, 24321.604000, 2291.792066, 2291.792066, 0.000000, X, Y) && !ellipse(25674.414000, 26224.107200, 1055.112030, 1055.112030, 0.000000, X, Y) && !ellipse(24850.104000, 26709.874000, 696.620020, 696.620020, 0.000000, X, Y) && !ellipse(24525.852400, 27339.798000, 1147.808033, 1147.808033, 0.000000, X, Y) && !ellipse(27363.210000, 27650.078000, 2442.816070, 2442.816070, 0.000000, X, Y) && !ellipse(23984.387200, 28284.769000, 974.920028, 974.920028, 0.000000, X, Y) && !ellipse(23666.031400, 26764.320000, 805.416023, 805.416023, 0.000000, X, Y) && !ellipse(22248.485200, 27028.356000, 438.836813, 438.836813, 0.000000, X, Y) && !ellipse(23961.714200, 29867.932000, 1116.872032, 1116.872032, 0.000000, X, Y) && !ellipse(25386.255859, 27168.534546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24082.402000, 24045.108000, 1178.760034, 1178.760034, 0.000000, X, Y) && !ellipse(22192.590400, 26501.970000, 659.184819, 659.184819, 0.000000, X, Y) && !ellipse(24026.507000, 27403.330000, 1949.840056, 920.208026, 0.361995, X, Y) && !ellipse(23649.893600, 24272.750600, 1216.872035, 622.113618, 30.863200, X, Y) && !ellipse(21681.677551, 28566.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25949.289337, 27160.388916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.337662, 27114.358673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.808280, 30395.472000, 1376.624040, 808.776023, 290.700000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src43.gif
[Sat Aug  4 01:01:18 2012] Mean detx,y = (696.62, -5339.25) 
[Sat Aug  4 01:01:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 01:01:55 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 01:01:56 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Aug  4 01:01:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Aug  4 14:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:29 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src43.arf
[Sat Aug  4 14:56:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:29 2012] Updating source flux to 1.3e-13
[Sat Aug  4 14:56:31 2012] Flag c found in src. 43 procflags, skipping spectral fitting