[Thu Aug  2 18:10:24 2012] Detection parameters:
  Position = (356.6, 329.0) = 18 52 25.51 0 41 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.3 +/- 17.0
  Background counts = 69.6
  Rate = 0.003 +/- 0.0006

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 4.76'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 8.81"
[Thu Aug  2 18:40:02 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.176
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.81"
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src47.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src47.csv
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src47.csv
[Thu Aug  2 21:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:04 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu Aug  2 21:36:04 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Aug  2 21:36:04 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 1142.150000, observed total counts = 1154.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 42 = 2.254559 pixels
[Fri Aug  3 01:06:54 2012] Warning, changing simple spatial fit ID from 47 to 35
[Fri Aug  3 01:06:54 2012] 1061.877000 total counts/ 742.762000 bgd. counts: snr = 11.709069
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.254559 pixels
  Position = (355.6, 331.0) = 18 52 25.79 0 41 11.9
  Extent = 17.8 (13.7-35.7)", rotation angle = 0
  Source counts = 319.1 +/- 32.6
  Background counts = 742.8
  Rate = 0.01 +/- 0.001
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 1156.770000, observed total counts = 1151.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 42 = 1.759912 pixels
[Fri Aug  3 01:06:54 2012] Warning, changing simple spatial fit ID from 35 to 47
[Fri Aug  3 01:06:54 2012] 1062.801000 total counts/ 748.729000 bgd. counts: snr = 11.478018
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.759912 pixels
  Position = (354.0, 331.7) = 18 52 26.26 0 41 15.0
  Extent = 17.6 (17.6-35.2)", rotation angle = 0
  Source counts = 314.1 +/- 32.6
  Background counts = 748.7
  Rate = 0.01 +/- 0.001
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:06:55 2012] Source is confused with source 23
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 17.62"
[Fri Aug  3 01:46:05 2012] source mask rpix=4.1, npix_max = 82, mask sum = 90, frac = 1.087
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 17.62"
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src44.ximg exists
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Aug  3 05:02:32 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src44 appears to have run properly
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Aug  3 05:02:33 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Aug  3 07:53:51 2012] Warning, spatial fit 44 centroid is now closest to src. 20
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 1140.410000, observed total counts = 1139.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 42 = 1.084506 pixels
[Fri Aug  3 07:53:51 2012] Warning, changing simple spatial fit ID from 44 to 47
[Fri Aug  3 07:53:51 2012] 1036.412000 total counts/ 697.767000 bgd. counts: snr = 12.820042
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.084506 pixels
  Position = (354.5, 330.8) = 18 52 26.11 0 41 10.8
  Extent = 18.2 (9.6-36.4)", rotation angle = 0
  Source counts = 338.6 +/- 32.2
  Background counts = 697.8
  Rate = 0.01 +/- 0.001
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 00:08:37 2012] XMMSAS src. selection expression = ellipse(30796.122600, 28730.192400, 1092.906031, 1092.906031, 0.000000, X, Y)
[Sat Aug  4 00:08:37 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src42_src.reg
[Sat Aug  4 00:08:37 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (292, 268) - (417, 394)
[Sat Aug  4 00:08:37 2012] XMMSAS bgd. selection expression = annulus(30796.122600, 28730.192400, 1821.510052, 3643.020105, X, Y) && !ellipse(27035.790200, 27692.351920, 351.924010, 351.924010, 0.000000, X, Y) && !ellipse(27347.849400, 24879.436800, 1144.080033, 731.349621, 157.031968, X, Y) && !ellipse(28415.272000, 25784.671200, 1462.960042, 1462.960042, 0.000000, X, Y) && !ellipse(26576.552000, 24482.811100, 2247.488065, 2247.488065, 0.000000, X, Y) && !ellipse(25906.994000, 24321.604000, 2291.792066, 2291.792066, 0.000000, X, Y) && !ellipse(28174.925652, 27102.838524, 1191.976034, 521.589062, 15.502630, X, Y) && !ellipse(27363.210000, 27650.078000, 2442.816070, 2442.816070, 0.000000, X, Y) && !ellipse(28499.272000, 28296.116000, 1312.640038, 1312.640038, 0.000000, X, Y) && !ellipse(29144.772400, 27018.677160, 1261.640036, 1261.640036, 0.000000, X, Y) && !ellipse(27310.318600, 30251.166200, 820.296024, 820.296024, 0.000000, X, Y) && !ellipse(30197.581400, 28838.562000, 1373.192040, 989.016028, 22.192100, X, Y) && !ellipse(29454.923645, 29454.910370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.507400, 30169.183000, 1319.944038, 1319.944038, 0.000000, X, Y) && !ellipse(29437.380000, 27523.006000, 1326.784038, 1326.784038, 0.000000, X, Y) && !ellipse(27958.992720, 29473.291600, 599.696017, 599.696017, 0.000000, X, Y) && !ellipse(28166.138000, 28000.186000, 2152.408062, 2152.408062, 0.000000, X, Y) && !ellipse(30993.998993, 29079.993683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.449036, 30636.963928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29853.292206, 28037.645111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29348.958000, 30171.444800, 1386.488040, 1386.488040, 0.000000, X, Y) && !ellipse(30917.750800, 28469.132000, 728.604821, 728.604821, 0.000000, X, Y)
[Sat Aug  4 00:08:37 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src42.gif
[Sat Aug  4 01:04:13 2012] Mean detx,y = (1399.02, 3325.54) 
[Sat Aug  4 01:04:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 01:04:39 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 01:04:40 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Aug  4 01:04:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Aug  4 14:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:29 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src42.arf
[Sat Aug  4 14:56:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:29 2012] Updating source flux to 1.1e-13
[Sat Aug  4 14:56:31 2012] Flag c found in src. 42 procflags, skipping spectral fitting