[Thu Aug  2 18:10:24 2012] Detection parameters:
  Position = (334.1, 332.0) = 18 52 32.05 0 41 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.6 +/- 21.9
  Background counts = 107.6
  Rate = 0.005 +/- 0.0008

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 3.55'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Thu Aug  2 18:40:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.703
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.20"
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src32.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src32.csv
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src32.csv
[Thu Aug  2 21:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Aug  2 21:36:03 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Fri Aug  3 01:06:54 2012] Warning, spatial fit 32 centroid is now closest to src. 17
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 1894.540000, observed total counts = 1892.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 40 = 4.232685 pixels
[Fri Aug  3 01:06:54 2012] Warning, changing simple spatial fit ID from 32 to 43
[Fri Aug  3 01:06:54 2012] 1989.601000 total counts/ 1628.510000 bgd. counts: snr = 8.947907
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.232685 pixels
  Position = (331.1, 329.1) = 18 52 32.92 0 41 3.4
  Extent = 16.7 (16.7-16.7)", rotation angle = 0
  Source counts = 361.1 +/- 44.6
  Background counts = 1628.5
  Rate = 0.01 +/- 0.001
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:06:54 2012] Source is confused with source 17
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 16.73"
[Fri Aug  3 01:46:05 2012] source mask rpix=3.8, npix_max = 75, mask sum = 64, frac = 0.847
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 16.73"
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src30.ximg exists
[Fri Aug  3 05:02:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src30.csv
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Aug  3 05:02:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src30.csv
[Fri Aug  3 05:02:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Aug  3 05:02:33 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 4168.530000, observed total counts = 4176.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 40 = 9.488298 pixels
[Fri Aug  3 07:53:51 2012] 4134.270000 total counts/ 2941.690000 bgd. counts: snr = 21.988169
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 9.488298 pixels
  Position = (324.3, 322.4) = 18 52 34.88 0 40 34.3
  Extent = 26.9 (18.5-33.5)", rotation angle = 0
  Source counts = 1192.6 +/- 64.3
  Background counts = 2941.7
  Rate = 0.04 +/- 0.002
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 00:08:36 2012] Counts = 1192.580000, rescaling region sizes by 2.000000
[Sat Aug  4 00:08:36 2012] XMMSAS src. selection expression = ellipse(28166.138000, 28000.186000, 3228.612093, 3228.612093, 0.000000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src40_src.reg
[Sat Aug  4 00:08:36 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (139, 137) - (510, 508)
[Sat Aug  4 00:08:36 2012] XMMSAS bgd. selection expression = annulus(28166.138000, 28000.186000, 10762.040310, 21524.080619, X, Y) && !ellipse(27035.790200, 27692.351920, 351.924010, 351.924010, 0.000000, X, Y) && !ellipse(27347.849400, 24879.436800, 1144.080033, 731.349621, 157.031968, X, Y) && !ellipse(28415.272000, 25784.671200, 1462.960042, 1462.960042, 0.000000, X, Y) && !ellipse(25072.575000, 25654.594600, 1271.696037, 1271.696037, 0.000000, X, Y) && !ellipse(26576.552000, 24482.811100, 2247.488065, 2247.488065, 0.000000, X, Y) && !ellipse(24695.555000, 26105.650000, 2228.704064, 2228.704064, 0.000000, X, Y) && !ellipse(25906.994000, 24321.604000, 2291.792066, 2291.792066, 0.000000, X, Y) && !ellipse(25674.414000, 26224.107200, 1055.112030, 1055.112030, 0.000000, X, Y) && !ellipse(24850.104000, 26709.874000, 696.620020, 696.620020, 0.000000, X, Y) && !ellipse(28174.925652, 27102.838524, 1191.976034, 521.589062, 15.502630, X, Y) && !ellipse(24525.852400, 27339.798000, 1147.808033, 1147.808033, 0.000000, X, Y) && !ellipse(26409.902000, 26789.730000, 427.956012, 427.956012, 0.000000, X, Y) && !ellipse(27363.210000, 27650.078000, 2442.816070, 2442.816070, 0.000000, X, Y) && !ellipse(23984.387200, 28284.769000, 974.920028, 974.920028, 0.000000, X, Y) && !ellipse(23666.031400, 26764.320000, 805.416023, 805.416023, 0.000000, X, Y) && !ellipse(28499.272000, 28296.116000, 1312.640038, 1312.640038, 0.000000, X, Y) && !ellipse(29144.772400, 27018.677160, 1261.640036, 1261.640036, 0.000000, X, Y) && !ellipse(27310.318600, 30251.166200, 820.296024, 820.296024, 0.000000, X, Y) && !ellipse(22248.485200, 27028.356000, 438.836813, 438.836813, 0.000000, X, Y) && !ellipse(30197.581400, 28838.562000, 1373.192040, 989.016028, 22.192100, X, Y) && !ellipse(29454.923645, 29454.910370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.714200, 29867.932000, 1116.872032, 1116.872032, 0.000000, X, Y) && !ellipse(26777.507400, 30169.183000, 1319.944038, 1319.944038, 0.000000, X, Y) && !ellipse(25386.255859, 27168.534546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24082.402000, 24045.108000, 1178.760034, 1178.760034, 0.000000, X, Y) && !ellipse(22192.590400, 26501.970000, 659.184819, 659.184819, 0.000000, X, Y) && !ellipse(29437.380000, 27523.006000, 1326.784038, 1326.784038, 0.000000, X, Y) && !ellipse(27958.992720, 29473.291600, 599.696017, 599.696017, 0.000000, X, Y) && !ellipse(26154.695320, 35738.478400, 427.756012, 427.756012, 0.000000, X, Y) && !ellipse(24026.507000, 27403.330000, 1949.840056, 920.208026, 0.361995, X, Y) && !ellipse(21911.536000, 28076.630000, 1361.592039, 1300.968037, 219.184000, X, Y) && !ellipse(30993.998993, 29079.993683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.449036, 30636.963928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.893600, 24272.750600, 1216.872035, 622.113618, 30.863200, X, Y) && !ellipse(21681.677551, 28566.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25949.289337, 27160.388916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.337662, 27114.358673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29853.292206, 28037.645111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.808280, 30395.472000, 1376.624040, 808.776023, 290.700000, X, Y) && !ellipse(30796.122600, 28730.192400, 1457.208042, 1457.208042, 0.000000, X, Y) && !ellipse(29348.958000, 30171.444800, 1386.488040, 1386.488040, 0.000000, X, Y) && !ellipse(30917.750800, 28469.132000, 728.604821, 728.604821, 0.000000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src40.gif
[Sat Aug  4 00:51:29 2012] Mean detx,y = (283.90, 738.83) 
[Sat Aug  4 00:51:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 01:00:25 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 01:00:25 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Aug  4 01:00:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Aug  4 14:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:29 2012] Using photon index=1.80, rate=0.0388, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src40.arf
[Sat Aug  4 14:56:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:29 2012] Updating source flux to 3.3e-13
[Sat Aug  4 14:56:31 2012] Flag c found in src. 40 procflags, skipping spectral fitting