[Thu Aug  2 18:10:24 2012] Detection parameters:
  Position = (282.9, 333.0) = 18 52 46.88 0 41 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.5 +/- 17.2
  Background counts = 76.0
  Rate = 0.005 +/- 0.0007

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 2.74'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Thu Aug  2 18:40:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.80"
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src37.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src37.csv
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src37.csv
[Thu Aug  2 21:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Aug  2 21:36:03 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Aug  3 01:06:54 2012] Source 38 is offset by -1.610458 and -5.895302 pixels which is larger than
2 X fitted extent = 0.948354 x 0.948354, not incorporating fit results
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 1358.320000, observed total counts = 1388.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 38 = 8.487326 pixels
[Fri Aug  3 01:06:54 2012] 1298.401000 total counts/ 1038.690000 bgd. counts: snr = 8.058373
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 8.487326 pixels
  Position = (276.3, 327.6) = 18 52 48.79 0 40 56.9
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 259.7 +/- 36.0
  Background counts = 1038.7
  Rate = 0.008 +/- 0.001
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:06:54 2012] Source is confused with source 15
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 15.60"
[Fri Aug  3 01:46:05 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.958
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 15.60"
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src34.ximg exists
[Fri Aug  3 05:02:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src34.csv
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Aug  3 05:02:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src34.csv
[Fri Aug  3 05:02:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Aug  3 05:02:33 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 3722.390000, observed total counts = 3726.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 38 = 1.244541 pixels
[Fri Aug  3 07:53:51 2012] Warning, changing simple spatial fit ID from 34 to 11
[Fri Aug  3 07:53:51 2012] 3403.109500 total counts/ 3391.210000 bgd. counts: snr = 0.204339
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.244541 pixels
  Position = (275.1, 327.9) = 18 52 49.14 0 40 58.0
  Extent = 3.6" x 3.6", rotation angle = 0
  Source counts = 11.9 +/- 58.3
  Background counts = 3391.2
  Rate = 0.0004 +/- 0.002
  Deleting source due to low Poisson probability