[Thu Aug  2 18:10:24 2012] Detection parameters:
  Position = (281.1, 279.2) = 18 52 47.41 0 37 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.6 +/- 18.6
  Background counts = 40.9
  Rate = 0.006 +/- 0.0007

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 1.88'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Aug  2 18:40:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.37"
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src27.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src27.csv
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Aug  2 21:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src27.csv
[Thu Aug  2 21:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Aug  2 21:36:03 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Aug  2 21:36:03 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 1111.270000, observed total counts = 1112.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 30 = 4.364888 pixels
[Fri Aug  3 01:06:54 2012] 1113.879000 total counts/ 945.875000 bgd. counts: snr = 5.462642
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.364888 pixels
  Position = (277.4, 276.9) = 18 52 48.49 0 37 16.6
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 168.0 +/- 33.4
  Background counts = 945.9
  Rate = 0.005 +/- 0.001
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 01:06:55 2012] Source is confused with source 53
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 14.73"
[Fri Aug  3 01:46:05 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.059
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 14.73"
[Fri Aug  3 05:02:31 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src25.ximg exists
[Fri Aug  3 05:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src25.csv
[Fri Aug  3 05:02:31 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Aug  3 05:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src25.csv
[Fri Aug  3 05:02:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Aug  3 05:02:33 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Aug  3 05:02:33 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Aug  3 07:53:51 2012] Warning, spatial fit 25 centroid is now closest to src. 26
[Fri Aug  3 07:53:51 2012] Source 30 is offset by 5.285291 and -3.491782 pixels which is larger than
2 X fitted extent = 3.752118 x 7.787530, not incorporating fit results
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 00:08:36 2012] XMMSAS src. selection expression = ellipse(24082.402000, 24045.108000, 884.070025, 884.070025, 0.000000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src30_src.reg
[Sat Aug  4 00:08:36 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (227, 226) - (328, 328)
[Sat Aug  4 00:08:36 2012] XMMSAS bgd. selection expression = annulus(24082.402000, 24045.108000, 1473.450042, 2946.900085, X, Y) && !ellipse(27347.849400, 24879.436800, 1144.080033, 731.349621, 157.031968, X, Y) && !ellipse(28415.272000, 25784.671200, 1462.960042, 1462.960042, 0.000000, X, Y) && !ellipse(25072.575000, 25654.594600, 1271.696037, 1271.696037, 0.000000, X, Y) && !ellipse(26576.552000, 24482.811100, 2247.488065, 2247.488065, 0.000000, X, Y) && !ellipse(24695.555000, 26105.650000, 2228.704064, 2228.704064, 0.000000, X, Y) && !ellipse(25906.994000, 24321.604000, 2291.792066, 2291.792066, 0.000000, X, Y) && !ellipse(25674.414000, 26224.107200, 1055.112030, 1055.112030, 0.000000, X, Y) && !ellipse(24850.104000, 26709.874000, 696.620020, 696.620020, 0.000000, X, Y) && !ellipse(28174.925652, 27102.838524, 1191.976034, 521.589062, 15.502630, X, Y) && !ellipse(24525.852400, 27339.798000, 1147.808033, 1147.808033, 0.000000, X, Y) && !ellipse(26409.902000, 26789.730000, 427.956012, 427.956012, 0.000000, X, Y) && !ellipse(27363.210000, 27650.078000, 2442.816070, 2442.816070, 0.000000, X, Y) && !ellipse(23666.031400, 26764.320000, 805.416023, 805.416023, 0.000000, X, Y) && !ellipse(22248.485200, 27028.356000, 438.836813, 438.836813, 0.000000, X, Y) && !ellipse(25386.255859, 27168.534546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22192.590400, 26501.970000, 659.184819, 659.184819, 0.000000, X, Y) && !ellipse(28166.138000, 28000.186000, 2152.408062, 2152.408062, 0.000000, X, Y) && !ellipse(24026.507000, 27403.330000, 1949.840056, 920.208026, 0.361995, X, Y) && !ellipse(21911.536000, 28076.630000, 1361.592039, 1300.968037, 219.184000, X, Y) && !ellipse(23649.893600, 24272.750600, 1216.872035, 622.113618, 30.863200, X, Y) && !ellipse(25949.289337, 27160.388916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.337662, 27114.358673, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 00:08:36 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src30.gif
[Sat Aug  4 00:50:19 2012] Mean detx,y = (-3138.07, -3148.08) 
[Sat Aug  4 00:50:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 00:50:32 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 00:50:32 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Aug  4 00:50:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Aug  4 14:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:29 2012] Using photon index=1.80, rate=0.00547, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src30.arf
[Sat Aug  4 14:56:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:29 2012] Updating source flux to 6.3e-14
[Sat Aug  4 14:56:31 2012] Flag b found in src. 30 procflags, skipping spectral fitting
[Sat Aug  4 14:56:31 2012] Flag c found in src. 30 procflags, skipping spectral fitting