[Thu Aug  2 18:10:23 2012] Detection parameters:
  Position = (311.5, 318.9) = 18 52 38.60 0 40 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1008.3 +/- 41.8
  Background counts = 103.1
  Rate = 0.03 +/- 0.001

[Thu Aug  2 18:10:24 2012] Off-axis axis estimate = 1.76'
[Thu Aug  2 18:40:02 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:40:02 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Aug  2 18:40:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Thu Aug  2 18:40:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu Aug  2 21:36:01 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 21:36:01 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 21:36:01 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 21:36:02 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 21:36:02 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 01:06:54 2012] Spatial fit model total counts = 2933.000000, observed total counts = 2933.000000
[Fri Aug  3 01:06:54 2012] Offset between fit and detection position for source 13 = 0.142347 pixels
[Fri Aug  3 01:06:54 2012] 2984.982000 total counts/ 2528.110000 bgd. counts: snr = 9.086499
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.142347 pixels
  Position = (311.3, 318.9) = 18 52 38.64 0 40 19.0
  Extent = 5.1" x 3.8", rotation angle = 0
  Source counts = 456.9 +/- 54.6
  Background counts = 2528.1
  Rate = 0.01 +/- 0.002
[Fri Aug  3 01:06:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 01:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 01:06:54 2012] Assessing source extent using major
[Fri Aug  3 01:06:54 2012] Source does appear to be extended
[Fri Aug  3 01:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.33
[Fri Aug  3 01:46:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:46:05 2012] Initial guess for spatial extent in simple fitting = 4.47"
[Fri Aug  3 01:46:05 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.965
[Fri Aug  3 01:46:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.47"
[Fri Aug  3 05:02:31 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 05:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 05:02:31 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 05:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 05:02:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 05:02:32 2012] fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 05:02:32 2012] Fit fullrun_mos1_xmm0550670301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 07:53:51 2012] Spatial fit model total counts = 2974.190000, observed total counts = 2973.000000
[Fri Aug  3 07:53:51 2012] Offset between fit and detection position for source 13 = 0.025324 pixels
[Fri Aug  3 07:53:51 2012] 3027.656000 total counts/ 2577.270000 bgd. counts: snr = 8.871661
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.025324 pixels
  Position = (311.3, 318.9) = 18 52 38.65 0 40 18.9
  Extent = 4.4 (3.9-4.9)", rotation angle = 0
  Source counts = 450.4 +/- 55.0
  Background counts = 2577.3
  Rate = 0.01 +/- 0.002
[Fri Aug  3 07:53:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 07:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 07:53:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 07:53:51 2012] Source does appear to be extended
[Fri Aug  3 07:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 07:53:51 2012] Source is confused with source 3
[Fri Aug  3 07:53:51 2012] Source is confused with source 40
[Sat Aug  4 00:08:34 2012] XMMSAS src. selection expression = ellipse(27035.790200, 27692.351920, 263.943008, 263.943008, 0.000000, X, Y)
[Sat Aug  4 00:08:34 2012] Writing source region out to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13_src.reg
[Sat Aug  4 00:08:34 2012] Extracting stamp from image fullrun_mos1_xmm0550670301_pi300-10000_cl_sm2.00.img.gz, (296, 304) - (326, 334)
[Sat Aug  4 00:08:34 2012] XMMSAS bgd. selection expression = annulus(27035.790200, 27692.351920, 439.905013, 879.810025, X, Y) && !ellipse(28415.272000, 25784.671200, 1462.960042, 1462.960042, 0.000000, X, Y) && !ellipse(25072.575000, 25654.594600, 1271.696037, 1271.696037, 0.000000, X, Y) && !ellipse(24695.555000, 26105.650000, 2228.704064, 2228.704064, 0.000000, X, Y) && !ellipse(25674.414000, 26224.107200, 1055.112030, 1055.112030, 0.000000, X, Y) && !ellipse(28174.925652, 27102.838524, 1191.976034, 521.589062, 15.502630, X, Y) && !ellipse(26409.902000, 26789.730000, 427.956012, 427.956012, 0.000000, X, Y) && !ellipse(27363.210000, 27650.078000, 2442.816070, 2442.816070, 0.000000, X, Y) && !ellipse(28499.272000, 28296.116000, 1312.640038, 1312.640038, 0.000000, X, Y) && !ellipse(29144.772400, 27018.677160, 1261.640036, 1261.640036, 0.000000, X, Y) && !ellipse(25386.255859, 27168.534546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28166.138000, 28000.186000, 2152.408062, 2152.408062, 0.000000, X, Y) && !ellipse(25949.289337, 27160.388916, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 00:08:34 2012] Writing fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13.gif
[Sat Aug  4 00:08:39 2012] Mean detx,y = (352.56, -227.70) 
[Sat Aug  4 00:08:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 00:08:48 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 00:08:48 2012] Setting source spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Aug  4 00:08:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Aug  4 14:56:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:56:28 2012] Error reading totcts from fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Aug  4 14:56:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:56:28 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13.arf
[Sat Aug  4 14:56:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:56:28 2012] Updating source flux to 1.9e-13
[Sat Aug  4 14:56:31 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Sat Aug  4 15:02:52 2012] Reading fit data from xmm0550670301/analysis//spectral/fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13_pl.csv
[Sat Aug  4 15:02:52 2012] Spectral fit parameter nH value = 1.79563e+22
[Sat Aug  4 15:02:52 2012] Spectral fit parameter PhoIndex value = 4.10841
[Sat Aug  4 15:02:52 2012] Failed to get F(0.3-8.0) from xmm0550670301/analysis//spectral/fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 15:02:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 15:02:52 2012] Using Nh = 1.8e+22, photon index=4.11, rate=0.0147, arf fullrun_mos1_xmm0550670301_pi300-10000_pass1_cl_src13.arf
[Sat Aug  4 15:02:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 15:02:52 2012] Updating source flux to 1.8e-13