[Wed May 22 08:42:09 2013] Detection parameters:
  Position = (322.4, 339.9) = 18 52 35.46 0 41 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 16.2
  Background counts = 60.4
  Rate = 0.005 +/- 0.0008

[Wed May 22 08:42:11 2013] Off-axis axis estimate = 3.47'
[Wed May 22 12:30:33 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Wed May 22 12:30:33 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Wed May 22 12:30:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.885
[Wed May 22 12:30:33 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 8.17"
[Wed May 22 16:41:48 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src38.ximg exists
[Wed May 22 16:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src38.csv
[Wed May 22 16:41:48 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed May 22 16:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src38.csv
[Wed May 22 16:41:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:41:49 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed May 22 16:41:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed May 22 16:41:49 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed May 22 16:41:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed May 22 16:41:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:42:15 2013] Warning, spatial fit 38 centroid is now closest to src. 29
[Wed May 22 16:42:15 2013] Vigneting correction estimate = 1.000000
[Wed May 22 16:42:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 16:42:15 2013] Assessing source extent using major
[Wed May 22 16:42:15 2013] Source does appear to be extended
[Wed May 22 16:42:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:34:59 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Wed May 22 20:34:59 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Wed May 22 20:34:59 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.885
[Wed May 22 20:34:59 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.17"
[Thu May 23 00:12:25 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src32.ximg exists
[Thu May 23 00:12:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src32.csv
[Thu May 23 00:12:25 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu May 23 00:12:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src32.csv
[Thu May 23 00:12:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:12:27 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu May 23 00:12:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu May 23 00:12:27 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu May 23 00:12:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu May 23 00:12:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:12:49 2013] Source 47 is offset by 0.522396 and 7.828160 pixels which is larger than
2 X fitted extent = 1.886239 x 1.886239, not incorporating fit results
[Thu May 23 00:12:49 2013] Warning, spatial fit 32 centroid is now closest to src. 29
[Thu May 23 00:12:49 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:12:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:12:49 2013] Assessing source extent using major
[Thu May 23 00:12:49 2013] Source does appear to be extended
[Thu May 23 00:12:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:12:49 2013] Source is confused with source 19
[Thu May 23 00:12:49 2013] Source is confused with source 45
[Thu May 23 05:15:57 2013] XMMSAS src. selection expression = ellipse(28003.124420, 29524.373901, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 05:15:57 2013] Writing source region out to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47_src.reg
[Thu May 23 05:15:57 2013] Extracting stamp from image fullrun_mos2_xmm0550670201_pi300-10000_cl_sm2.00.img.gz, (285, 302) - (360, 377)
[Thu May 23 05:15:58 2013] XMMSAS bgd. selection expression = annulus(28003.124420, 29524.373901, 1087.500000, 2175.000000, X, Y) && !ellipse(27073.519012, 27697.023438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.084800, 25744.156800, 1904.288055, 902.464026, 146.082700, X, Y) && !ellipse(26206.406000, 26459.291800, 1057.296030, 714.112021, 324.264800, X, Y) && !ellipse(28162.869800, 27161.258400, 1203.664035, 576.224817, 17.190300, X, Y) && !ellipse(28279.016000, 27138.339200, 1230.336035, 572.244816, 17.608500, X, Y) && !ellipse(28430.926400, 28201.592800, 1254.712036, 1254.712036, 0.000000, X, Y) && !ellipse(29656.285000, 29747.737986, 2202.544063, 1099.232032, 76.683900, X, Y) && !ellipse(29789.050000, 29756.932000, 2614.352075, 1445.528042, 64.570900, X, Y) && !ellipse(30090.808000, 29077.184000, 1399.984040, 1399.984040, 0.000000, X, Y) && !ellipse(27128.247131, 30238.292694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27265.719238, 28220.080139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29435.048096, 26668.693420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29321.832000, 27484.402000, 1312.824038, 1312.824038, 0.000000, X, Y) && !ellipse(26477.792600, 30197.614600, 694.846420, 694.846420, 0.000000, X, Y) && !ellipse(30354.286000, 29113.585800, 2323.088067, 1589.632046, 14.053200, X, Y) && !ellipse(24622.201400, 28874.611600, 1668.000048, 485.017614, 284.442000, X, Y) && !ellipse(27075.443909, 26671.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.597800, 28964.912000, 1222.776035, 426.779212, 100.371800, X, Y) && !ellipse(29330.274000, 30479.580000, 1364.632039, 1364.632039, 0.000000, X, Y) && !ellipse(28794.788000, 28665.764000, 2509.424072, 920.008026, 314.142600, X, Y) && !ellipse(27803.044067, 30700.551880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26086.283539, 27579.256958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30491.908000, 29422.722000, 1461.104042, 1461.104042, 0.000000, X, Y) && !ellipse(31225.720000, 28881.369400, 1161.544033, 1161.544033, 0.000000, X, Y)
[Thu May 23 05:15:58 2013] Writing fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47.gif
[Thu May 23 05:43:07 2013] Mean detx,y = (-1005.81, 1898.07) 
[Thu May 23 05:43:09 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 05:43:25 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 05:43:25 2013] Setting source spectrum file to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Thu May 23 05:43:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Thu May 23 08:19:59 2013] Not generating rmf since there are only 93 counts
[Thu May 23 08:19:59 2013] rmf not generated due to insufficient counts
[Thu May 23 08:37:28 2013] Updating aperture counts using extracted products
[Thu May 23 08:37:28 2013] Total counts from fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 649.00
[Thu May 23 08:37:28 2013] Total counts from fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47_bgd.pi.gz = 282.00
[Thu May 23 08:37:29 2013] Got source and background scale factors 1163172.000000, 1307716.000000
[Thu May 23 08:37:29 2013] User source parameters:
  Position = (322.4, 339.9) = 18 52 35.46 0 41 50.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 398.2 +/- 26.5
  Background aperture counts = 250.8
  Rate = 0.02 +/- 0.001

[Thu May 23 08:37:29 2013] Updating counts from extracted products
[Thu May 23 08:37:29 2013] Set source signif. to 398.17/15.84 = 25.14
[Thu May 23 08:37:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 08:37:32 2013] Using photon index=1.80, rate=0.0182, arf fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47.arf
[Thu May 23 08:37:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 08:37:32 2013] Updating source flux to 3.5e-13
[Thu May 23 08:37:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 08:38:11 2013] xmm0550670201/analysis//spectral/fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete