[Wed May 22 08:42:08 2013] Detection parameters:
  Position = (314.0, 324.9) = 18 52 37.92 0 40 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.7 +/- 21.1
  Background counts = 67.3
  Rate = 0.009 +/- 0.001

[Wed May 22 08:42:11 2013] Off-axis axis estimate = 2.23'
[Wed May 22 12:30:33 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed May 22 12:30:33 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Wed May 22 12:30:33 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Wed May 22 12:30:33 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.54"
[Wed May 22 16:41:48 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src25.ximg exists
[Wed May 22 16:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src25.csv
[Wed May 22 16:41:48 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May 22 16:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src25.csv
[Wed May 22 16:41:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:41:49 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May 22 16:41:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 22 16:41:49 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May 22 16:41:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 22 16:41:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:42:15 2013] Warning, spatial fit 25 centroid is now closest to src. 3
[Wed May 22 16:42:15 2013] Vigneting correction estimate = 1.000000
[Wed May 22 16:42:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 16:42:15 2013] Assessing source extent using major
[Wed May 22 16:42:15 2013] Source does appear to be extended
[Wed May 22 16:42:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 16:42:15 2013] Source is confused with source 3
[Wed May 22 20:34:59 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed May 22 20:34:59 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Wed May 22 20:34:59 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Wed May 22 20:34:59 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 7.54"
[Thu May 23 00:12:25 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src21.ximg exists
[Thu May 23 00:12:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src21.csv
[Thu May 23 00:12:25 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May 23 00:12:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src21.csv
[Thu May 23 00:12:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:12:26 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May 23 00:12:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May 23 00:12:26 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May 23 00:12:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May 23 00:12:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:12:49 2013] Warning, spatial fit 21 centroid is now closest to src. 3
[Thu May 23 00:12:49 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:12:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:12:49 2013] Assessing source extent using major
[Thu May 23 00:12:49 2013] Source does appear to be extended
[Thu May 23 00:12:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 05:15:56 2013] XMMSAS src. selection expression = ellipse(27265.719238, 28220.080139, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 05:15:56 2013] Writing source region out to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27_src.reg
[Thu May 23 05:15:56 2013] Extracting stamp from image fullrun_mos2_xmm0550670201_pi300-10000_cl_sm2.00.img.gz, (276, 287) - (351, 362)
[Thu May 23 05:15:56 2013] XMMSAS bgd. selection expression = annulus(27265.719238, 28220.080139, 1087.500000, 2175.000000, X, Y) && !ellipse(27073.519012, 27697.023438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.188000, 25506.230000, 1782.400051, 1782.400051, 0.000000, X, Y) && !ellipse(28498.084800, 25744.156800, 1904.288055, 902.464026, 146.082700, X, Y) && !ellipse(28067.046906, 25613.005981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.512000, 24649.747600, 2249.920065, 858.480025, 339.574800, X, Y) && !ellipse(25385.538000, 24908.344000, 1145.576033, 637.116018, 216.174000, X, Y) && !ellipse(26206.406000, 26459.291800, 1057.296030, 714.112021, 324.264800, X, Y) && !ellipse(28162.869800, 27161.258400, 1203.664035, 576.224817, 17.190300, X, Y) && !ellipse(28279.016000, 27138.339200, 1230.336035, 572.244816, 17.608500, X, Y) && !ellipse(28430.926400, 28201.592800, 1254.712036, 1254.712036, 0.000000, X, Y) && !ellipse(29656.285000, 29747.737986, 2202.544063, 1099.232032, 76.683900, X, Y) && !ellipse(25180.668000, 25623.200000, 1074.096031, 1074.096031, 183.121000, X, Y) && !ellipse(29789.050000, 29756.932000, 2614.352075, 1445.528042, 64.570900, X, Y) && !ellipse(30090.808000, 29077.184000, 1399.984040, 1399.984040, 0.000000, X, Y) && !ellipse(27128.247131, 30238.292694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29435.048096, 26668.693420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23829.534600, 29680.494000, 1295.112037, 741.363221, 84.567760, X, Y) && !ellipse(29321.832000, 27484.402000, 1312.824038, 1312.824038, 0.000000, X, Y) && !ellipse(26477.792600, 30197.614600, 694.846420, 694.846420, 0.000000, X, Y) && !ellipse(30354.286000, 29113.585800, 2323.088067, 1589.632046, 14.053200, X, Y) && !ellipse(24622.201400, 28874.611600, 1668.000048, 485.017614, 284.442000, X, Y) && !ellipse(27075.443909, 26671.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.124420, 29524.373901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.597800, 28964.912000, 1222.776035, 426.779212, 100.371800, X, Y) && !ellipse(29330.274000, 30479.580000, 1364.632039, 1364.632039, 0.000000, X, Y) && !ellipse(28794.788000, 28665.764000, 2509.424072, 920.008026, 314.142600, X, Y) && !ellipse(27803.044067, 30700.551880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26086.283539, 27579.256958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30491.908000, 29422.722000, 1461.104042, 1461.104042, 0.000000, X, Y)
[Thu May 23 05:15:56 2013] Writing fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27.gif
[Thu May 23 05:37:14 2013] Mean detx,y = (-152.01, 471.32) 
[Thu May 23 05:37:16 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 05:37:31 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 05:37:32 2013] Setting source spectrum file to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May 23 05:37:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu May 23 07:45:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 07:45:26 2013] rmf not generated due to insufficient counts
[Thu May 23 08:37:27 2013] Updating aperture counts using extracted products
[Thu May 23 08:37:27 2013] Total counts from fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 1305.00
[Thu May 23 08:37:27 2013] Total counts from fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 432.00
[Thu May 23 08:37:27 2013] Got source and background scale factors 1122960.000000, 1554668.000000
[Thu May 23 08:37:27 2013] User source parameters:
  Position = (314.0, 324.9) = 18 52 37.92 0 40 51.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 993.0 +/- 37.1
  Background aperture counts = 312.0
  Rate = 0.05 +/- 0.002

[Thu May 23 08:37:27 2013] Updating counts from extracted products
[Thu May 23 08:37:27 2013] Set source signif. to 992.96/17.66 = 56.21
[Thu May 23 08:37:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 08:37:31 2013] Using photon index=1.80, rate=0.0453, arf fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27.arf
[Thu May 23 08:37:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 08:37:31 2013] Updating source flux to 8.5e-13
[Thu May 23 08:37:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 08:38:11 2013] xmm0550670201/analysis//spectral/fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete