[Wed May 22 08:42:08 2013] Detection parameters:
  Position = (276.1, 341.9) = 18 52 48.89 0 42 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.6 +/- 17.7
  Background counts = 48.2
  Rate = 0.008 +/- 0.001

[Wed May 22 08:42:11 2013] Off-axis axis estimate = 3.54'
[Wed May 22 12:30:33 2013] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Wed May 22 12:30:33 2013] Initial guess for spatial extent in simple fitting = 8.20"
[Wed May 22 12:30:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.703
[Wed May 22 12:30:33 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.20"
[Wed May 22 16:41:48 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src27.ximg exists
[Wed May 22 16:41:48 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May 22 16:41:48 2013] Fit fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_src27 appears to have run properly
[Wed May 22 16:41:49 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May 22 16:41:49 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May 22 16:41:49 2013] Fit fullrun_mos2_xmm0550670201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed May 22 16:42:15 2013] Spatial fit model total counts = 729.741000, observed total counts = 742.000000
[Wed May 22 16:42:15 2013] Offset between fit and detection position for source 26 = 1.094498 pixels
[Wed May 22 16:42:15 2013] 688.923000 total counts/ 474.813000 bgd. counts: snr = 9.825975
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.094498 pixels
  Position = (275.1, 341.5) = 18 52 49.19 0 41 58.3
  Extent = 16.4 (16.4-32.8)" x 7.2 (5.4-9.4)", rotation angle = 95 (85-104) degrees
  Source counts = 214.1 +/- 26.2
  Background counts = 474.8
  Rate = 0.01 +/- 0.001
[Wed May 22 16:42:15 2013] Spatial fit model total counts = 757.026000, observed total counts = 758.000000
[Wed May 22 16:42:15 2013] Offset between fit and detection position for source 26 = 0.791899 pixels
[Wed May 22 16:42:15 2013] Warning, changing simple spatial fit ID from 27 to 50
[Wed May 22 16:42:15 2013] 713.030000 total counts/ 501.416000 bgd. counts: snr = 9.450294
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.791899 pixels
  Position = (274.3, 341.8) = 18 52 49.41 0 41 59.2
  Extent = 16.1 (16.1-32.2)" x 9.9 (7.7-12.6)", rotation angle = 83 (90-90) degrees
  Source counts = 211.6 +/- 26.7
  Background counts = 501.4
  Rate = 0.01 +/- 0.001
[Wed May 22 16:42:15 2013] Vigneting correction estimate = 1.000000
[Wed May 22 16:42:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 16:42:15 2013] Assessing source extent using major axis lower bound
[Wed May 22 16:42:15 2013] Source does appear to be extended
[Wed May 22 16:42:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Wed May 22 16:42:15 2013] Source is confused with source 46
[Wed May 22 20:34:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 20:34:59 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Wed May 22 20:34:59 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Wed May 22 20:34:59 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.01"
[Thu May 23 00:12:25 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src23.ximg exists
[Thu May 23 00:12:25 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu May 23 00:12:25 2013] Fit fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_src23 appears to have run properly
[Thu May 23 00:12:26 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu May 23 00:12:26 2013] fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu May 23 00:12:26 2013] Fit fullrun_mos2_xmm0550670201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu May 23 00:12:49 2013] Warning, spatial fit 23 centroid is now closest to src. 50
[Thu May 23 00:12:49 2013] Spatial fit model total counts = 926.579000, observed total counts = 927.000000
[Thu May 23 00:12:49 2013] Offset between fit and detection position for source 26 = 0.120352 pixels
[Thu May 23 00:12:49 2013] Warning, changing simple spatial fit ID from 23 to 43
[Thu May 23 00:12:49 2013] 830.367000 total counts/ 637.618000 bgd. counts: snr = 7.633292
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.120352 pixels
  Position = (274.5, 341.7) = 18 52 49.37 0 41 59.0
  Extent = 16.2 (10.8-25.7)" x 9.3 (7.6-11.6)", rotation angle = 85 (62-104) degrees
  Source counts = 192.7 +/- 28.8
  Background counts = 637.6
  Rate = 0.009 +/- 0.001
[Thu May 23 00:12:49 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:12:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:12:49 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:12:49 2013] Source does appear to be extended
[Thu May 23 00:12:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Thu May 23 05:15:57 2013] XMMSAS src. selection expression = ellipse(23829.534600, 29680.494000, 971.334028, 556.022416, 84.567760, X, Y)
[Thu May 23 05:15:57 2013] Writing source region out to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26_src.reg
[Thu May 23 05:15:57 2013] Extracting stamp from image fullrun_mos2_xmm0550670201_pi300-10000_cl_sm2.00.img.gz, (219, 286) - (330, 398)
[Thu May 23 05:15:57 2013] XMMSAS bgd. selection expression = annulus(23829.534600, 29680.494000, 1618.890047, 3237.780093, X, Y) && !ellipse(27073.519012, 27697.023438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.188000, 25506.230000, 1782.400051, 1782.400051, 0.000000, X, Y) && !ellipse(28498.084800, 25744.156800, 1904.288055, 902.464026, 146.082700, X, Y) && !ellipse(26858.512000, 24649.747600, 2249.920065, 858.480025, 339.574800, X, Y) && !ellipse(26206.406000, 26459.291800, 1057.296030, 714.112021, 324.264800, X, Y) && !ellipse(28162.869800, 27161.258400, 1203.664035, 576.224817, 17.190300, X, Y) && !ellipse(28279.016000, 27138.339200, 1230.336035, 572.244816, 17.608500, X, Y) && !ellipse(23773.026800, 26356.233000, 1158.480033, 733.353621, 250.888000, X, Y) && !ellipse(23743.513400, 26739.209400, 1184.296034, 816.696024, 75.180300, X, Y) && !ellipse(23942.584000, 28159.008000, 1147.488033, 511.759215, 97.539550, X, Y) && !ellipse(25180.668000, 25623.200000, 1074.096031, 1074.096031, 183.121000, X, Y) && !ellipse(27128.247131, 30238.292694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27265.719238, 28220.080139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22214.522400, 26323.862800, 1278.800037, 474.595214, 100.727000, X, Y) && !ellipse(26477.792600, 30197.614600, 694.846420, 694.846420, 0.000000, X, Y) && !ellipse(24622.201400, 28874.611600, 1668.000048, 485.017614, 284.442000, X, Y) && !ellipse(27075.443909, 26671.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.597800, 28964.912000, 1222.776035, 426.779212, 100.371800, X, Y) && !ellipse(21567.361282, 28050.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22217.534149, 27884.718079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21698.242100, 28876.400800, 1373.056040, 452.336013, 83.818730, X, Y) && !ellipse(28794.788000, 28665.764000, 2509.424072, 920.008026, 314.142600, X, Y) && !ellipse(23817.260000, 29110.722000, 1250.200036, 809.408023, 240.348000, X, Y) && !ellipse(27803.044067, 30700.551880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26086.283539, 27579.256958, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 05:15:57 2013] Writing fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26.gif
[Thu May 23 05:38:07 2013] Mean detx,y = (3168.31, 2164.27) 
[Thu May 23 05:38:09 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 05:38:26 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 05:38:26 2013] Setting source spectrum file to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu May 23 05:38:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu May 23 08:37:27 2013] Updating aperture counts using extracted products
[Thu May 23 08:37:27 2013] Total counts from fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 698.00
[Thu May 23 08:37:27 2013] Total counts from fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2272.00
[Thu May 23 08:37:27 2013] Got source and background scale factors 1614352.000000, 13384816.000000
[Thu May 23 08:37:27 2013] User source parameters:
  Position = (274.5, 341.7) = 18 52 49.37 0 41 59.0
  Extent = 16.2 (10.8-25.7)" x 9.3 (7.6-11.6)", rotation angle = 85 (62-104) degrees
  Source aperture counts = 424.0 +/- 27.4
  Background aperture counts = 274.0
  Rate = 0.02 +/- 0.001

[Thu May 23 08:37:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 08:37:31 2013] Using photon index=1.80, rate=0.00879, arf fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26.arf
[Thu May 23 08:37:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 08:37:31 2013] Updating source flux to 2.1e-13
[Thu May 23 08:37:53 2013] Flag c found in src. 26 procflags, skipping spectral fitting
[Thu May 23 08:38:11 2013] xmm0550670201/analysis//spectral/fullrun_mos2_xmm0550670201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete