[Thu Sep  6 22:37:10 2012] Detection parameters:
  Position = (281.1, 295.7) = 5 16 31.25 -10 35 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2788.8 +/- 67.0
  Background counts = 495.8
  Rate = 0.03 +/- 0.0008

[Thu Sep  6 22:37:11 2012] Off-axis axis estimate = 1.27'
[Thu Sep  6 22:43:53 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 22:43:53 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Thu Sep  6 22:43:53 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.831
[Thu Sep  6 22:43:53 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.06"
[Fri Sep  7 00:12:18 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Sep  7 00:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src4.csv
[Fri Sep  7 00:12:18 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Sep  7 00:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src4.csv
[Fri Sep  7 00:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:12:19 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Sep  7 00:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Sep  7 00:12:19 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Sep  7 00:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Sep  7 00:12:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:41:54 2012] Spatial fit model total counts = 3970.970000, observed total counts = 3380.000000
[Fri Sep  7 00:41:54 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 00:41:54 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:41:54 2012] Assessing source extent using major
[Fri Sep  7 00:41:54 2012] Source does appear to be extended
[Fri Sep  7 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:42:06 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:42:06 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Fri Sep  7 00:42:06 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.831
[Fri Sep  7 00:42:06 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.06"
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Sep  7 01:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src4.csv
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Sep  7 01:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src4.csv
[Fri Sep  7 01:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Sep  7 01:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Sep  7 01:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Sep  7 01:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:26:15 2012] Spatial fit model total counts = 3952.070000, observed total counts = 3380.000000
[Fri Sep  7 02:26:15 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 02:26:15 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:26:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:26:15 2012] Assessing source extent using major
[Fri Sep  7 02:26:15 2012] Source does appear to be extended
[Fri Sep  7 02:26:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:26:26 2012] Counts = 2788.779297, rescaling region sizes by 2.000000
[Fri Sep  7 02:26:26 2012] XMMSAS src. selection expression = ellipse(24411.021118, 25678.776367, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Sep  7 02:26:26 2012] Writing source region out to fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src4_src.reg
[Fri Sep  7 02:26:26 2012] Extracting stamp from image fullrun_pn_xmm0550640101_pi300-10000_cl_sm2.00.img.gz, (206, 221) - (356, 371)
[Fri Sep  7 02:26:26 2012] XMMSAS bgd. selection expression = annulus(24411.021118, 25678.776367, 4350.000000, 8700.000000, X, Y) && !ellipse(27378.417400, 27486.573800, 1444.269642, 1444.269642, 0.000000, X, Y) && !ellipse(22027.038452, 29488.809784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21250.541900, 27085.279600, 408.584812, 408.584812, 0.000000, X, Y) && !ellipse(23115.085388, 24835.374451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29656.481800, 29644.727600, 392.049611, 392.049611, 0.000000, X, Y) && !ellipse(29480.534058, 28421.355255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29096.604970, 25956.145400, 393.044811, 393.044811, 0.000000, X, Y) && !ellipse(26593.230200, 25485.563600, 374.610411, 374.610411, 0.000000, X, Y) && !ellipse(31607.669189, 24676.462982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32662.917572, 22801.768800, 427.353612, 427.353612, 0.000000, X, Y) && !ellipse(30738.537384, 21480.302872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32591.800000, 33150.764600, 766.442422, 766.442422, 0.000000, X, Y) && !ellipse(17930.322400, 28901.738400, 444.283964, 444.283964, 0.000000, X, Y) && !ellipse(26885.481873, 28737.587830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.269867, 28702.344971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28286.838196, 28616.765411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16782.154190, 27116.981842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29633.778000, 26643.922000, 1248.552036, 1248.552036, 0.000000, X, Y) && !ellipse(27095.460175, 25977.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22413.360000, 24484.904000, 314.383209, 314.383209, 0.000000, X, Y) && !ellipse(22045.397980, 23864.589539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30768.324158, 23373.223267, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 02:26:26 2012] Writing fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src4.gif
[Fri Sep  7 02:35:59 2012] Mean detx,y = (-2538.22, 1949.35) 
[Fri Sep  7 02:36:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 02:38:08 2012] grppha failed
[Fri Sep  7 02:38:08 2012] Setting source spectrum file to fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Sep  7 02:38:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Sep  7 03:21:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 03:21:41 2012] rmf not generated due to insufficient counts
[Fri Sep  7 03:37:04 2012] Updating aperture counts using extracted products
[Fri Sep  7 03:37:04 2012] Error reading totcts from fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Sep  7 03:37:05 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 03:37:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 03:37:09 2012] xmm0550640101/analysis//spectral/fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete