[Thu Sep  6 22:37:10 2012] Detection parameters:
  Position = (315.4, 316.3) = 5 16 21.15 -10 33 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250683.0 +/- 578.1
  Background counts = 514.6
  Rate = 2 +/- 0.005

[Thu Sep  6 22:37:11 2012] Off-axis axis estimate = 1.78'
[Thu Sep  6 22:43:53 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 22:43:53 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Sep  6 22:43:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.049
[Thu Sep  6 22:43:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Fri Sep  7 00:12:18 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep  7 00:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 00:12:18 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep  7 00:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 00:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:12:19 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep  7 00:12:19 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep  7 00:12:19 2012] Fit fullrun_pn_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep  7 00:41:54 2012] Spatial fit model total counts = 174428.000000, observed total counts = 179580.000000
[Fri Sep  7 00:41:54 2012] Offset between fit and detection position for source 1 = 0.265769 pixels
[Fri Sep  7 00:41:54 2012] 174687.000000 total counts/ 25600.000000 bgd. counts: snr = 931.793750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.265769 pixels
  Position = (315.3, 316.5) = 5 16 21.19 -10 33 42.0
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 149087.0 +/- 418.0
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Fri Sep  7 00:41:54 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:41:54 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 00:41:54 2012] Source does appear to be extended
[Fri Sep  7 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:42:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:42:06 2012] Initial guess for spatial extent in simple fitting = 6.01"
[Fri Sep  7 00:42:06 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.847
[Fri Sep  7 00:42:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.01"
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep  7 01:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src1.csv
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep  7 01:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src1.csv
[Fri Sep  7 01:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep  7 01:57:08 2012] fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep  7 01:57:08 2012] Fit fullrun_pn_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep  7 02:26:15 2012] Spatial fit model total counts = 174421.000000, observed total counts = 179580.000000
[Fri Sep  7 02:26:15 2012] Offset between fit and detection position for source 1 = 0.000921 pixels
[Fri Sep  7 02:26:15 2012] 174690.000000 total counts/ 25600.000000 bgd. counts: snr = 931.812500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000921 pixels
  Position = (315.3, 316.5) = 5 16 21.19 -10 33 42.0
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 149090.0 +/- 418.0
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Fri Sep  7 02:26:15 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:26:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:26:15 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 02:26:15 2012] Source does appear to be extended
[Fri Sep  7 02:26:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:26:26 2012] Counts = 149090.000000, rescaling region sizes by 3.000000
[Fri Sep  7 02:26:26 2012] XMMSAS src. selection expression = ellipse(27378.417400, 27486.573800, 1083.202231, 1083.202231, 0.000000, X, Y)
[Fri Sep  7 02:26:26 2012] Writing source region out to fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep  7 02:26:26 2012] Extracting stamp from image fullrun_pn_xmm0550640101_pi300-10000_cl_sm2.00.img.gz, (253, 254) - (378, 379)
[Fri Sep  7 02:26:26 2012] XMMSAS bgd. selection expression = annulus(27378.417400, 27486.573800, 5416.011156, 10832.022312, X, Y) && !ellipse(22027.038452, 29488.809784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21250.541900, 27085.279600, 408.584812, 408.584812, 0.000000, X, Y) && !ellipse(24411.021118, 25678.776367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.085388, 24835.374451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.528595, 35636.556671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29656.481800, 29644.727600, 392.049611, 392.049611, 0.000000, X, Y) && !ellipse(29480.534058, 28421.355255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29096.604970, 25956.145400, 393.044811, 393.044811, 0.000000, X, Y) && !ellipse(26593.230200, 25485.563600, 374.610411, 374.610411, 0.000000, X, Y) && !ellipse(31607.669189, 24676.462982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32662.917572, 22801.768800, 427.353612, 427.353612, 0.000000, X, Y) && !ellipse(30738.537384, 21480.302872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32591.800000, 33150.764600, 766.442422, 766.442422, 0.000000, X, Y) && !ellipse(37190.769691, 28914.430530, 732.660015, 392.866771, 224.515151, X, Y) && !ellipse(17930.322400, 28901.738400, 444.283964, 444.283964, 0.000000, X, Y) && !ellipse(26885.481873, 28737.587830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.269867, 28702.344971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28286.838196, 28616.765411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34062.554380, 28409.703400, 295.730409, 295.730409, 0.000000, X, Y) && !ellipse(37512.719849, 27967.499237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35163.515411, 27698.664246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16782.154190, 27116.981842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29633.778000, 26643.922000, 1248.552036, 1248.552036, 0.000000, X, Y) && !ellipse(38450.877106, 22453.181274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34259.897430, 25710.652649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.460175, 25977.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22413.360000, 24484.904000, 314.383209, 314.383209, 0.000000, X, Y) && !ellipse(36405.981642, 24095.761800, 402.960812, 314.494409, 90.000000, X, Y) && !ellipse(22045.397980, 23864.589539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30768.324158, 23373.223267, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 02:26:26 2012] Writing fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src1.gif
[Fri Sep  7 02:27:32 2012] Mean detx,y = (143.55, -295.73) 
[Fri Sep  7 02:27:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 02:30:42 2012] grppha failed
[Fri Sep  7 02:30:42 2012] Setting source spectrum file to fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 02:30:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep  7 03:37:04 2012] Updating aperture counts using extracted products
[Fri Sep  7 03:37:04 2012] Error reading totcts from fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 03:37:05 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 03:37:08 2012] Source 1 has no response, skipping
[Fri Sep  7 03:37:09 2012] xmm0550640101/analysis//spectral/fullrun_pn_xmm0550640101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete