[Thu Sep  6 22:37:24 2012] Detection parameters:
  Position = (484.2, 260.2) = 5 15 31.34 -10 37 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.8 +/- 25.7
  Background counts = 164.9
  Rate = 0.002 +/- 0.0002

[Thu Sep  6 22:37:24 2012] Off-axis axis estimate = 13.75'
[Fri Sep  7 00:12:20 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:12:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 00:12:20 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Fri Sep  7 00:12:20 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.968
[Fri Sep  7 00:12:20 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.30"
[Fri Sep  7 00:23:57 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Sep  7 00:23:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 00:23:57 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Sep  7 00:23:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 00:23:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:23:57 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep  7 00:23:57 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep  7 00:23:57 2012] Fit fullrun_mos1_xmm0550640101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep  7 00:41:56 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.673824 pixels away
[Fri Sep  7 00:41:56 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.486127 pixels away
[Fri Sep  7 00:41:56 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:41:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:41:56 2012] Assessing source extent using major
[Fri Sep  7 00:41:56 2012] Source does appear to be extended
[Fri Sep  7 00:41:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 01:57:09 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 01:57:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 01:57:09 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Fri Sep  7 01:57:09 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.968
[Fri Sep  7 01:57:09 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.30"
[Fri Sep  7 02:09:39 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Sep  7 02:09:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_src10.csv
[Fri Sep  7 02:09:39 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Sep  7 02:09:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_src10.csv
[Fri Sep  7 02:09:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:09:39 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep  7 02:09:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Sep  7 02:09:39 2012] fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep  7 02:09:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Sep  7 02:09:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550640101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:26:17 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.471430 pixels away
[Fri Sep  7 02:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:26:17 2012] Assessing source extent using major
[Fri Sep  7 02:26:17 2012] Source does appear to be extended
[Fri Sep  7 02:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 03:21:45 2012] XMMSAS src. selection expression = ellipse(42075.889496, 22585.608826, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep  7 03:21:45 2012] Writing source region out to fullrun_mos1_xmm0550640101_pi300-10000_pass1_cl_src14_src.reg
[Fri Sep  7 03:21:45 2012] Extracting stamp from image fullrun_mos1_xmm0550640101_pi300-10000_cl_sm2.00.img.gz, (447, 223) - (522, 298)
[Fri Sep  7 03:21:46 2012] XMMSAS bgd. selection expression = annulus(42075.889496, 22585.608826, 1087.500000, 2175.000000, X, Y) && !ellipse(40096.713837, 21368.218155, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 03:21:46 2012] Writing fullrun_mos1_xmm0550640101_pi300-10000_pass1_cl_src14.gif
[Fri Sep  7 03:27:52 2012] Mean detx,y = (-2112.71, 15117.23) 
[Fri Sep  7 03:27:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 03:28:02 2012] grppha failed
[Fri Sep  7 03:28:02 2012] Setting source spectrum file to fullrun_mos1_xmm0550640101_pi300-10000_pass1_cl_src14_src.pi.gz
[Fri Sep  7 03:28:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550640101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Sep  7 03:28:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 03:28:33 2012] rmf not generated due to insufficient counts
[Fri Sep  7 03:37:05 2012] Updating aperture counts using extracted products
[Fri Sep  7 03:37:05 2012] Error reading totcts from fullrun_mos1_xmm0550640101_pi300-10000_pass1_cl_src14_src.pi.gz
[Fri Sep  7 03:37:05 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 03:37:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 03:37:07 2012] xmm0550640101/analysis//spectral/fullrun_mos1_xmm0550640101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete