[Sat Aug  4 13:29:36 2012] Detection parameters:
  Position = (304.1, 278.3) = 10 37 35.36 -56 47 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4842.2 +/- 84.8
  Background counts = 95.5
  Rate = 0.2 +/- 0.003

[Sat Aug  4 13:29:36 2012] Off-axis axis estimate = 1.52'
[Sat Aug  4 13:53:53 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 13:53:53 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Sat Aug  4 13:53:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sat Aug  4 13:53:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Sat Aug  4 13:58:14 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 13:58:14 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 13:58:14 2012] Fit fullrun_mos1_xmm0550560101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Aug  4 13:58:14 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 13:58:14 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 13:58:14 2012] Fit fullrun_mos1_xmm0550560101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 14:02:14 2012] Spatial fit model total counts = 3514.150000, observed total counts = 3426.000000
[Sat Aug  4 14:02:14 2012] Offset between fit and detection position for source 2 = 0.191927 pixels
[Sat Aug  4 14:02:14 2012] 3541.356000 total counts/ 919.126000 bgd. counts: snr = 86.493457
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.191927 pixels
  Position = (304.0, 278.5) = 10 37 35.42 -56 47 57.5
  Extent = 5.3 (5.1-5.6)" x 5.0 (4.8-5.2)", rotation angle = 121 (91-67) degrees
  Source counts = 2622.2 +/- 59.5
  Background counts = 919.1
  Rate = 0.1 +/- 0.003
[Sat Aug  4 14:02:14 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 14:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 14:02:14 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 14:02:14 2012] Source does appear to be extended
[Sat Aug  4 14:02:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Sat Aug  4 14:15:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 14:15:03 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Sat Aug  4 14:15:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.052
[Sat Aug  4 14:15:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.17"
[Sat Aug  4 14:19:54 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 14:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 14:19:54 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 14:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 14:19:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 14:19:54 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 14:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 14:19:54 2012] fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 14:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 14:19:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550560101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 14:23:34 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Aug  4 14:23:34 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 14:23:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 14:23:34 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 14:23:34 2012] Source does appear to be extended
[Sat Aug  4 14:23:34 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Sat Aug  4 14:44:35 2012] Counts = 2622.230000, rescaling region sizes by 2.000000
[Sat Aug  4 14:44:35 2012] XMMSAS src. selection expression = ellipse(26400.196610, 24179.221800, 639.219618, 602.188817, 120.756358, X, Y)
[Sat Aug  4 14:44:35 2012] Writing source region out to fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug  4 14:44:35 2012] Extracting stamp from image fullrun_mos1_xmm0550560101_pi300-10000_cl_sm2.00.img.gz, (267, 242) - (341, 315)
[Sat Aug  4 14:44:35 2012] XMMSAS bgd. selection expression = annulus(26400.196610, 24179.221800, 2130.732061, 4261.464123, X, Y)
[Sat Aug  4 14:44:35 2012] Writing fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2.gif
[Sat Aug  4 14:44:36 2012] Mean detx,y = (150.83, -450.21) 
[Sat Aug  4 14:44:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 14:44:55 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 14:44:55 2012] Setting source spectrum file to fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 14:44:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug  4 14:54:03 2012] Updating aperture counts using extracted products
[Sat Aug  4 14:54:03 2012] Error reading totcts from fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 14:54:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:54:03 2012] Using photon index=1.80, rate=0.125, arf fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 14:54:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:54:03 2012] Updating source flux to 1.3e-12
[Sat Aug  4 14:54:18 2012] Reading fit data from xmm0550560101/analysis//spectral/fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Aug  4 14:54:18 2012] Spectral fit parameter nH value = 6.2446e+21
[Sat Aug  4 14:54:18 2012] Spectral fit parameter PhoIndex value = 0.902579
[Sat Aug  4 14:54:18 2012] Failed to get F(0.3-8.0) from xmm0550560101/analysis//spectral/fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 14:54:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 14:54:18 2012] Using Nh = 6.2e+21, photon index=0.90, rate=0.125, arf fullrun_mos1_xmm0550560101_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 14:54:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 14:54:18 2012] Updating source flux to 2.7e-12