[Wed Aug 22 15:35:51 2012] Detection parameters:
  Position = (328.0, 293.5) = 12 28 50.16 14 0 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.0 +/- 11.9
  Background counts = 34.1
  Rate = 0.004 +/- 0.0009

[Wed Aug 22 15:35:51 2012] Off-axis axis estimate = 2.17'
[Wed Aug 22 15:37:49 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 15:37:49 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Aug 22 15:37:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Wed Aug 22 15:37:49 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.51"
[Wed Aug 22 16:33:53 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_src18.ximg exists
[Wed Aug 22 16:33:53 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Aug 22 16:33:53 2012] Fit fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed Aug 22 16:33:53 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Aug 22 16:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Aug 22 16:33:53 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Aug 22 16:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Aug 22 16:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:31:35 2012] Spatial fit model total counts = 577.289000, observed total counts = 520.000000
[Wed Aug 22 17:31:35 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 22 17:31:35 2012] Source 19 is offset by -7.514614 and 2.191940 pixels which is larger than
2 X fitted extent = 0.879067 x 0.879067, not incorporating fit results
[Wed Aug 22 17:31:35 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:31:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:31:35 2012] Assessing source extent using major
[Wed Aug 22 17:31:35 2012] Source does appear to be extended
[Wed Aug 22 17:31:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 17:31:35 2012] Source is confused with source 20
[Wed Aug 22 17:31:49 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:31:49 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Aug 22 17:31:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Wed Aug 22 17:31:49 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.51"
[Wed Aug 22 18:22:45 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_src18.ximg exists
[Wed Aug 22 18:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_src18.csv
[Wed Aug 22 18:22:45 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Aug 22 18:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_src18.csv
[Wed Aug 22 18:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 18:22:46 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Aug 22 18:22:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Aug 22 18:22:46 2012] fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Aug 22 18:22:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Aug 22 18:22:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 19:06:28 2012] Source 19 is offset by -0.976421 and -4.094773 pixels which is larger than
2 X fitted extent = 0.863582 x 0.863582, not incorporating fit results
[Wed Aug 22 19:06:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:06:28 2012] Assessing source extent using major
[Wed Aug 22 19:06:28 2012] Source does appear to be extended
[Wed Aug 22 19:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 19:06:43 2012] XMMSAS src. selection expression = ellipse(28483.254608, 25488.264740, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 19:06:43 2012] Writing source region out to fullrun_pn_xmm0550540201_pi300-10000_pass1_cl_src19_src.reg
[Wed Aug 22 19:06:43 2012] Extracting stamp from image fullrun_pn_xmm0550540201_pi300-10000_cl_sm2.00.img.gz, (290, 256) - (365, 331)
[Wed Aug 22 19:06:43 2012] XMMSAS bgd. selection expression = annulus(28483.254608, 25488.264740, 1087.500000, 2175.000000, X, Y) && !ellipse(25546.532013, 23887.815735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.640289, 25096.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.395813, 24767.700409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29586.307770, 24247.067749, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 19:06:43 2012] Writing fullrun_pn_xmm0550540201_pi300-10000_pass1_cl_src19.gif
[Wed Aug 22 19:16:05 2012] Mean detx,y = (-3128.59, -16.50) 
[Wed Aug 22 19:16:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 19:16:35 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 19:16:35 2012] Setting source spectrum file to fullrun_pn_xmm0550540201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 22 19:16:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550540201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Aug 22 19:33:08 2012] Not generating rmf since there are only 51 counts
[Wed Aug 22 19:33:08 2012] rmf not generated due to insufficient counts
[Wed Aug 22 20:19:00 2012] Updating aperture counts using extracted products
[Wed Aug 22 20:19:00 2012] Error reading totcts from fullrun_pn_xmm0550540201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 22 20:19:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 20:19:01 2012] Using photon index=1.80, rate=0.00391, arf fullrun_pn_xmm0550540201_pi300-10000_pass1_cl_src19.arf
[Wed Aug 22 20:19:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 20:19:01 2012] Updating source flux to 1.2e-14
[Wed Aug 22 20:19:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting