[Wed Aug 22 15:36:28 2012] Detection parameters:
  Position = (198.6, 258.8) = 12 29 28.80 13 57 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 257.5 +/- 20.0
  Background counts = 10.8
  Rate = 0.02 +/- 0.001

[Wed Aug 22 15:36:29 2012] Off-axis axis estimate = 7.78'
[Wed Aug 22 16:58:42 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 16:58:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 16:58:42 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Wed Aug 22 16:58:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.091
[Wed Aug 22 16:58:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.32"
[Wed Aug 22 17:31:28 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 22 17:31:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 17:31:28 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 22 17:31:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 17:31:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:31:28 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 22 17:31:28 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 22 17:31:28 2012] Fit fullrun_mos2_xmm0550540201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 22 17:31:41 2012] Spatial fit model total counts = 389.000000, observed total counts = 389.000000
[Wed Aug 22 17:31:41 2012] Offset between fit and detection position for source 1 = 0.069432 pixels
[Wed Aug 22 17:31:41 2012] 391.503000 total counts/ 212.414000 bgd. counts: snr = 12.287891
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.069432 pixels
  Position = (198.7, 258.8) = 12 29 28.79 13 57 29.2
  Extent = 5.4 (4.7-6.2)", rotation angle = 0
  Source counts = 179.1 +/- 19.8
  Background counts = 212.4
  Rate = 0.009 +/- 0.001
[Wed Aug 22 17:31:41 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:31:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:31:41 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 17:31:41 2012] Source does appear to be extended
[Wed Aug 22 17:31:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:39:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:39:36 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Wed Aug 22 18:39:36 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.998
[Wed Aug 22 18:39:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Wed Aug 22 19:06:21 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 19:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 19:06:21 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 19:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 19:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 19:06:21 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 19:06:21 2012] fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 19:06:21 2012] Fit fullrun_mos2_xmm0550540201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 22 19:06:34 2012] Spatial fit model total counts = 339.000000, observed total counts = 339.000000
[Wed Aug 22 19:06:34 2012] Offset between fit and detection position for source 1 = 0.023468 pixels
[Wed Aug 22 19:06:34 2012] 342.726000 total counts/ 170.164000 bgd. counts: snr = 13.228522
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023468 pixels
  Position = (198.7, 258.8) = 12 29 28.79 13 57 29.1
  Extent = 5.1 (4.5-6.0)", rotation angle = 0
  Source counts = 172.6 +/- 18.5
  Background counts = 170.2
  Rate = 0.009 +/- 0.001
[Wed Aug 22 19:06:34 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:06:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:06:34 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 19:06:34 2012] Source does appear to be extended
[Wed Aug 22 19:06:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 19:54:39 2012] XMMSAS src. selection expression = ellipse(17236.230000, 22463.927800, 307.896609, 307.896609, 0.000000, X, Y)
[Wed Aug 22 19:54:39 2012] Writing source region out to fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 22 19:54:39 2012] Extracting stamp from image fullrun_mos2_xmm0550540201_pi300-10000_cl_sm2.00.img.gz, (181, 241) - (216, 276)
[Wed Aug 22 19:54:39 2012] XMMSAS bgd. selection expression = annulus(17236.230000, 22463.927800, 513.161015, 1026.322030, X, Y)
[Wed Aug 22 19:54:39 2012] Writing fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1.gif
[Wed Aug 22 19:54:41 2012] Mean detx,y = (-8142.91, -1991.16) 
[Wed Aug 22 19:54:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 19:54:50 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 19:54:50 2012] Setting source spectrum file to fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 19:54:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 22 20:19:01 2012] Updating aperture counts using extracted products
[Wed Aug 22 20:19:01 2012] Error reading totcts from fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 20:19:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 20:19:02 2012] Using photon index=1.80, rate=0.00899, arf fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 20:19:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 20:19:02 2012] Updating source flux to 1.6e-13
[Wed Aug 22 20:19:52 2012] Reading fit data from xmm0550540201/analysis//spectral/fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 22 20:19:52 2012] Spectral fit parameter nH value = 4.9044e+20
[Wed Aug 22 20:19:52 2012] Spectral fit parameter PhoIndex value = 2.82419
[Wed Aug 22 20:19:52 2012] Failed to get F(0.3-8.0) from xmm0550540201/analysis//spectral/fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 22 20:19:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 20:19:52 2012] Using Nh = 4.9e+20, photon index=2.82, rate=0.00899, arf fullrun_mos2_xmm0550540201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 20:19:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 20:19:52 2012] Updating source flux to 1.2e-13