[Sat Sep  1 10:06:41 2012] Detection parameters:
  Position = (301.1, 179.0) = 12 28 58.37 13 51 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1558.5 +/- 47.1
  Background counts = 178.3
  Rate = 0.02 +/- 0.0006

[Sat Sep  1 10:06:42 2012] Off-axis axis estimate = 8.66'
[Sat Sep  1 10:11:15 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 10:11:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  1 10:11:15 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Sat Sep  1 10:11:15 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.848
[Sat Sep  1 10:11:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.76"
[Sat Sep  1 11:14:25 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Sep  1 11:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_src3.csv
[Sat Sep  1 11:14:25 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Sep  1 11:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_src3.csv
[Sat Sep  1 11:14:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 11:14:26 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep  1 11:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Sep  1 11:14:26 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep  1 11:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Sep  1 11:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 13:16:43 2012] Warning, spatial fit 3 centroid is now closest to src. 43
[Sat Sep  1 13:16:43 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 13:16:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 13:16:43 2012] Assessing source extent using major
[Sat Sep  1 13:16:43 2012] Source does appear to be extended
[Sat Sep  1 13:16:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 13:17:08 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 13:17:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  1 13:17:08 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Sat Sep  1 13:17:08 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.848
[Sat Sep  1 13:17:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.76"
[Sat Sep  1 14:27:10 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Sep  1 14:27:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_src3.csv
[Sat Sep  1 14:27:10 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Sep  1 14:27:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_src3.csv
[Sat Sep  1 14:27:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 14:27:11 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep  1 14:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Sep  1 14:27:11 2012] fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep  1 14:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Sep  1 14:27:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550540101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 15:48:04 2012] Spatial fit model total counts = 2976.450000, observed total counts = 2358.000000
[Sat Sep  1 15:48:04 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep  1 15:48:05 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 15:48:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 15:48:05 2012] Assessing source extent using major
[Sat Sep  1 15:48:05 2012] Source does appear to be extended
[Sat Sep  1 15:48:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 15:48:26 2012] Counts = 1558.509399, rescaling region sizes by 2.000000
[Sat Sep  1 15:48:26 2012] XMMSAS src. selection expression = ellipse(26151.313171, 15521.720184, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Sep  1 15:48:26 2012] Writing source region out to fullrun_pn_xmm0550540101_pi300-10000_pass1_cl_src3_src.reg
[Sat Sep  1 15:48:26 2012] Extracting stamp from image fullrun_pn_xmm0550540101_pi300-10000_cl_sm2.00.img.gz, (226, 104) - (376, 254)
[Sat Sep  1 15:48:27 2012] XMMSAS bgd. selection expression = annulus(26151.313171, 15521.720184, 4350.000000, 8700.000000, X, Y) && !ellipse(25617.981800, 23857.412400, 699.340820, 699.340820, 0.000000, X, Y) && !ellipse(17278.367218, 22427.305359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21359.229800, 11688.509200, 450.459213, 450.459213, 0.000000, X, Y) && !ellipse(24683.912000, 23373.390800, 366.637611, 366.637611, 0.000000, X, Y) && !ellipse(35029.744000, 17043.694000, 1693.776049, 284.563208, 128.409000, X, Y) && !ellipse(28558.283081, 10265.554039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22009.478088, 11417.976807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28608.171082, 25084.891449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18805.141200, 24243.853800, 347.500810, 347.500810, 0.000000, X, Y) && !ellipse(24686.198200, 23549.752000, 1175.496034, 356.569610, 90.000000, X, Y) && !ellipse(33476.913361, 23948.138000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.360352, 23133.739624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33568.957916, 19636.781952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21351.629532, 18644.282883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26123.945129, 18318.131119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.795471, 17515.069717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.174805, 17514.948914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23973.821960, 16608.141600, 478.599214, 478.599214, 0.000000, X, Y) && !ellipse(21296.617325, 16204.506104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19753.582001, 15966.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21709.372162, 14839.446686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.240387, 13806.252655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23456.177002, 13492.929993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.863525, 12570.198456, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  1 15:48:27 2012] Writing fullrun_pn_xmm0550540101_pi300-10000_pass1_cl_src3.gif
[Sat Sep  1 15:54:41 2012] Mean detx,y = (3567.25, -7867.65) 
[Sat Sep  1 15:54:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 15:57:25 2012] grppha failed
[Sat Sep  1 15:57:25 2012] Setting source spectrum file to fullrun_pn_xmm0550540101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Sep  1 15:57:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550540101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Sep  1 16:43:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep  1 16:43:06 2012] rmf not generated due to insufficient counts
[Sat Sep  1 17:03:18 2012] Updating aperture counts using extracted products
[Sat Sep  1 17:03:18 2012] Error reading totcts from fullrun_pn_xmm0550540101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Sep  1 17:03:18 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 17:03:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Sep  1 17:03:25 2012] xmm0550540101/analysis//spectral/fullrun_pn_xmm0550540101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete