[Wed Aug 29 10:12:17 2012] Detection parameters:
  Position = (288.2, 367.6) = 22 16 20.03 -36 46 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.7 +/- 13.4
  Background counts = 28.4
  Rate = 0.006 +/- 0.0009

[Wed Aug 29 10:12:17 2012] Off-axis axis estimate = 5.07'
[Wed Aug 29 10:14:05 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 10:14:05 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Wed Aug 29 10:14:05 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.763
[Wed Aug 29 10:14:05 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.96"
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src39.ximg exists
[Wed Aug 29 11:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src39.csv
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Aug 29 11:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src39.csv
[Wed Aug 29 11:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Aug 29 11:09:46 2012] Fit fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Aug 29 12:17:06 2012] Spatial fit model total counts = 370.231000, observed total counts = 366.000000
[Wed Aug 29 12:17:06 2012] Offset between fit and detection position for source 40 = 0.138214 pixels
[Wed Aug 29 12:17:06 2012] 372.015700 total counts/ 326.677000 bgd. counts: snr = 2.508475
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.138214 pixels
  Position = (288.3, 367.7) = 22 16 20.01 -36 46 33.5
  Extent = 3.2 (2.2-4.6)", rotation angle = 0
  Source counts = 45.3 +/- 19.3
  Background counts = 326.7
  Rate = 0.002 +/- 0.0008
[Wed Aug 29 12:17:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 12:17:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 12:17:06 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 12:17:06 2012] Source does appear to be extended
[Wed Aug 29 12:17:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 12:17:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 12:17:25 2012] Initial guess for spatial extent in simple fitting = 3.16"
[Wed Aug 29 12:17:25 2012] source mask rpix=0.7, npix_max = 6, mask sum = 3, frac = 0.499
[Wed Aug 29 12:17:25 2012] Skipping simple spatial due to low active detector fraction
[Wed Aug 29 14:19:25 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 14:19:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 14:19:25 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 14:19:25 2012] Source does appear to be extended
[Wed Aug 29 14:19:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 14:19:44 2012] XMMSAS src. selection expression = ellipse(25030.931400, 31944.263600, 189.369005, 189.369005, 0.000000, X, Y)
[Wed Aug 29 14:19:44 2012] Writing source region out to fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src40_src.reg
[Wed Aug 29 14:19:44 2012] Extracting stamp from image fullrun_pn_xmm0550460801_pi300-10000_cl_sm2.00.img.gz, (277, 357) - (299, 379)
[Wed Aug 29 14:19:44 2012] XMMSAS bgd. selection expression = annulus(25030.931400, 31944.263600, 315.615009, 631.230018, X, Y)
[Wed Aug 29 14:19:44 2012] Writing fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src40.gif
[Wed Aug 29 14:39:38 2012] Mean detx,y = (-4127.21, -3790.43) 
[Wed Aug 29 14:39:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 14:39:46 2012] grppha failed
[Wed Aug 29 14:39:46 2012] Setting source spectrum file to fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src40_src.pi.gz
[Wed Aug 29 14:39:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Aug 29 14:47:25 2012] Not generating rmf since there are only 45 counts
[Wed Aug 29 14:47:25 2012] rmf not generated due to insufficient counts
[Wed Aug 29 14:59:11 2012] Updating aperture counts using extracted products
[Wed Aug 29 14:59:11 2012] Error reading totcts from fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src40_src.pi.gz
[Wed Aug 29 14:59:11 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 14:59:15 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 29 14:59:16 2012] xmm0550460801/analysis//spectral/fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete