[Wed Aug 29 10:12:16 2012] Detection parameters:
  Position = (323.2, 241.3) = 22 16 7.34 -36 55 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1403.1 +/- 43.8
  Background counts = 30.0
  Rate = 0.08 +/- 0.003

[Wed Aug 29 10:12:17 2012] Off-axis axis estimate = 4.52'
[Wed Aug 29 10:14:05 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 10:14:05 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Wed Aug 29 10:14:05 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.962
[Wed Aug 29 10:14:05 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.69"
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src15.ximg exists
[Wed Aug 29 11:09:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src15.csv
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Aug 29 11:09:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src15.csv
[Wed Aug 29 11:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Aug 29 11:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Aug 29 11:09:46 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Aug 29 11:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Aug 29 11:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 12:17:06 2012] Source 16 is offset by 7.293929 and 5.823927 pixels which is larger than
2 X fitted extent = 2.289523 x 8.073242, not incorporating fit results
[Wed Aug 29 12:17:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 12:17:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 12:17:06 2012] Assessing source extent using major
[Wed Aug 29 12:17:06 2012] Source does appear to be extended
[Wed Aug 29 12:17:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 12:17:25 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 12:17:25 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Wed Aug 29 12:17:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.962
[Wed Aug 29 12:17:25 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.69"
[Wed Aug 29 13:12:32 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_src16.ximg exists
[Wed Aug 29 13:12:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_src16.csv
[Wed Aug 29 13:12:32 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Aug 29 13:12:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_src16.csv
[Wed Aug 29 13:12:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 13:12:33 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Aug 29 13:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Aug 29 13:12:33 2012] fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Aug 29 13:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Aug 29 13:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 14:19:25 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.637142 pixels away
[Wed Aug 29 14:19:25 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 14:19:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 14:19:25 2012] Assessing source extent using major
[Wed Aug 29 14:19:25 2012] Source does appear to be extended
[Wed Aug 29 14:19:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 14:19:43 2012] Counts = 1403.145752, rescaling region sizes by 2.000000
[Wed Aug 29 14:19:43 2012] XMMSAS src. selection expression = ellipse(28070.413483, 20941.395645, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug 29 14:19:43 2012] Writing source region out to fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src16_src.reg
[Wed Aug 29 14:19:43 2012] Extracting stamp from image fullrun_pn_xmm0550460801_pi300-10000_cl_sm2.00.img.gz, (248, 166) - (398, 316)
[Wed Aug 29 14:19:43 2012] XMMSAS bgd. selection expression = annulus(28070.413483, 20941.395645, 4350.000000, 8700.000000, X, Y) && !ellipse(27701.951172, 27010.422241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21433.357060, 26185.329200, 394.218411, 335.024810, 245.237000, X, Y) && !ellipse(24870.636000, 25617.636000, 317.982409, 317.982409, 0.000000, X, Y) && !ellipse(22097.120800, 14606.642200, 366.489611, 366.489611, 0.000000, X, Y) && !ellipse(19125.347641, 20747.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.506594, 20514.164200, 350.297610, 350.297610, 0.000000, X, Y) && !ellipse(31920.004181, 19520.365555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22167.127090, 18660.497147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.891785, 18644.791321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21175.577194, 16685.849640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25059.397858, 13673.181259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20556.812000, 28889.708000, 1268.808037, 1268.808037, 0.000000, X, Y) && !ellipse(23365.088257, 14372.344727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.032000, 25261.456000, 1367.504039, 1367.504039, 0.000000, X, Y) && !ellipse(18893.668457, 18520.647461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.368164, 15628.773621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22620.298000, 27540.072600, 593.352817, 593.352817, 0.000000, X, Y) && !ellipse(20812.967800, 17878.842000, 439.970413, 439.970413, 0.000000, X, Y) && !ellipse(21919.213730, 29957.156952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21230.643829, 29322.753632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32205.621613, 28937.601807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20410.381821, 28389.502869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.358093, 24985.112793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23749.374542, 24496.980347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.993958, 24093.227386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32227.266690, 23650.012800, 497.596647, 497.596647, 0.000000, X, Y) && !ellipse(22656.564484, 23212.471863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31933.539018, 21775.671422, 1060.593403, 774.474502, 352.378250, X, Y) && !ellipse(34432.941620, 20150.512863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32385.183899, 17890.751053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.342000, 16593.040600, 534.664815, 534.664815, 0.000000, X, Y) && !ellipse(22726.837799, 15547.943909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32827.620636, 13299.053116, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 14:19:43 2012] Writing fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src16.gif
[Wed Aug 29 14:27:07 2012] Mean detx,y = (2715.96, 5298.25) 
[Wed Aug 29 14:27:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 14:28:48 2012] grppha failed
[Wed Aug 29 14:28:48 2012] Setting source spectrum file to fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src16_src.pi.gz
[Wed Aug 29 14:28:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Aug 29 14:47:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 29 14:47:23 2012] rmf not generated due to insufficient counts
[Wed Aug 29 14:59:11 2012] Updating aperture counts using extracted products
[Wed Aug 29 14:59:11 2012] Error reading totcts from fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src16_src.pi.gz
[Wed Aug 29 14:59:11 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 14:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 29 14:59:16 2012] xmm0550460801/analysis//spectral/fullrun_pn_xmm0550460801_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete