[Wed Aug 29 10:12:50 2012] Detection parameters:
  Position = (327.2, 214.9) = 22 16 5.87 -36 57 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.7 +/- 11.2
  Background counts = 10.8
  Rate = 0.004 +/- 0.0006

[Wed Aug 29 10:12:50 2012] Off-axis axis estimate = 6.41'
[Wed Aug 29 11:36:07 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 11:36:07 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Wed Aug 29 11:36:07 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.950
[Wed Aug 29 11:36:07 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.63"
[Wed Aug 29 12:16:58 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_src17.ximg exists
[Wed Aug 29 12:16:58 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Aug 29 12:16:58 2012] Fit fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_src17 appears to have run properly
[Wed Aug 29 12:16:58 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Aug 29 12:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Aug 29 12:16:58 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Aug 29 12:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Aug 29 12:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 12:17:14 2012] Spatial fit model total counts = 208.087000, observed total counts = 189.000000
[Wed Aug 29 12:17:14 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 29 12:17:14 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 12:17:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 12:17:14 2012] Assessing source extent using major
[Wed Aug 29 12:17:14 2012] Source does appear to be extended
[Wed Aug 29 12:17:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 13:37:59 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 13:37:59 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Wed Aug 29 13:37:59 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.950
[Wed Aug 29 13:37:59 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 9.63"
[Wed Aug 29 14:19:17 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_src17.ximg exists
[Wed Aug 29 14:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_src17.csv
[Wed Aug 29 14:19:17 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Aug 29 14:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_src17.csv
[Wed Aug 29 14:19:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 14:19:18 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Aug 29 14:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Aug 29 14:19:18 2012] fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Aug 29 14:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Aug 29 14:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 14:19:33 2012] Spatial fit model total counts = 208.350000, observed total counts = 189.000000
[Wed Aug 29 14:19:33 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 29 14:19:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 14:19:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 14:19:33 2012] Assessing source extent using major
[Wed Aug 29 14:19:33 2012] Source does appear to be extended
[Wed Aug 29 14:19:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 14:51:55 2012] XMMSAS src. selection expression = ellipse(28421.442871, 18644.229782, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 29 14:51:55 2012] Writing source region out to fullrun_mos2_xmm0550460801_pi300-10000_pass1_cl_src22_src.reg
[Wed Aug 29 14:51:55 2012] Extracting stamp from image fullrun_mos2_xmm0550460801_pi300-10000_cl_sm2.00.img.gz, (290, 177) - (365, 252)
[Wed Aug 29 14:51:55 2012] XMMSAS bgd. selection expression = annulus(28421.442871, 18644.229782, 1087.500000, 2175.000000, X, Y) && !ellipse(28047.843079, 20943.392227, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 14:51:55 2012] Writing fullrun_mos2_xmm0550460801_pi300-10000_pass1_cl_src22.gif
[Wed Aug 29 14:54:58 2012] Mean detx,y = (-3875.91, -7370.72) 
[Wed Aug 29 14:54:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 14:55:09 2012] grppha failed
[Wed Aug 29 14:55:09 2012] Setting source spectrum file to fullrun_mos2_xmm0550460801_pi300-10000_pass1_cl_src22_src.pi.gz
[Wed Aug 29 14:55:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550460801_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Aug 29 14:58:42 2012] Not generating rmf since there are only 71 counts
[Wed Aug 29 14:58:42 2012] rmf not generated due to insufficient counts
[Wed Aug 29 14:59:11 2012] Updating aperture counts using extracted products
[Wed Aug 29 14:59:11 2012] Error reading totcts from fullrun_mos2_xmm0550460801_pi300-10000_pass1_cl_src22_src.pi.gz
[Wed Aug 29 14:59:12 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 14:59:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 29 14:59:15 2012] xmm0550460801/analysis//spectral/fullrun_mos2_xmm0550460801_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete