[Wed Aug 29 10:12:32 2012] Detection parameters:
  Position = (240.3, 295.5) = 22 16 37.40 -36 51 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 8.6
  Background counts = 10.7
  Rate = 0.002 +/- 0.0005

[Wed Aug 29 10:12:32 2012] Off-axis axis estimate = 4.22'
[Wed Aug 29 11:09:47 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 11:09:47 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Wed Aug 29 11:09:47 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Wed Aug 29 11:09:47 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.54"
[Wed Aug 29 11:36:07 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass0_src22.ximg exists
[Wed Aug 29 11:36:07 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Aug 29 11:36:07 2012] Fit fullrun_mos1_xmm0550460801_pi300-10000_cl_pass0_src22 appears to have run properly
[Wed Aug 29 11:36:07 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Aug 29 11:36:07 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Aug 29 11:36:07 2012] Fit fullrun_mos1_xmm0550460801_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Aug 29 12:17:09 2012] Spatial fit model total counts = 179.113000, observed total counts = 185.000000
[Wed Aug 29 12:17:09 2012] Offset between fit and detection position for source 27 = 7.659322 pixels
[Wed Aug 29 12:17:09 2012] 206.920500 total counts/ 133.500000 bgd. counts: snr = 6.354432
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 7.659322 pixels
  Position = (234.4, 290.6) = 22 16 39.53 -36 52 8.9
  Extent = 17.1 (17.0-34.2)", rotation angle = 0
  Source counts = 73.4 +/- 14.4
  Background counts = 133.5
  Rate = 0.003 +/- 0.0005
[Wed Aug 29 12:17:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 12:17:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 12:17:09 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 12:17:09 2012] Source does appear to be extended
[Wed Aug 29 12:17:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 13:12:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 13:12:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 29 13:12:33 2012] Initial guess for spatial extent in simple fitting = 17.08"
[Wed Aug 29 13:12:33 2012] source mask rpix=3.9, npix_max = 78, mask sum = 65, frac = 0.830
[Wed Aug 29 13:12:33 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 17.08"
[Wed Aug 29 13:37:59 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_src22.ximg exists
[Wed Aug 29 13:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_src22.csv
[Wed Aug 29 13:37:59 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Aug 29 13:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_src22.csv
[Wed Aug 29 13:37:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 13:37:59 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Aug 29 13:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Aug 29 13:37:59 2012] fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Aug 29 13:37:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Aug 29 13:37:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550460801_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 14:19:28 2012] Source 27 is offset by -5.818989 and -4.755816 pixels which is larger than
2 X fitted extent = 1.962966 x 1.962966, not incorporating fit results
[Wed Aug 29 14:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 14:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 14:19:28 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 14:19:28 2012] Source does appear to be extended
[Wed Aug 29 14:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 14:47:26 2012] XMMSAS src. selection expression = ellipse(20348.398000, 25232.382000, 1024.668029, 1024.668029, 0.000000, X, Y)
[Wed Aug 29 14:47:26 2012] Writing source region out to fullrun_mos1_xmm0550460801_pi300-10000_pass1_cl_src27_src.reg
[Wed Aug 29 14:47:26 2012] Extracting stamp from image fullrun_mos1_xmm0550460801_pi300-10000_cl_sm2.00.img.gz, (176, 232) - (293, 349)
[Wed Aug 29 14:47:26 2012] XMMSAS bgd. selection expression = annulus(20348.398000, 25232.382000, 1707.780049, 3415.560098, X, Y) && !ellipse(21410.893600, 26218.580800, 355.974410, 355.974410, 0.000000, X, Y) && !ellipse(17266.707660, 24864.908200, 759.332822, 288.285608, 101.065263, X, Y) && !ellipse(20597.098200, 29106.019800, 621.147218, 621.147218, 0.000000, X, Y) && !ellipse(23721.426220, 24507.736400, 175.016805, 175.016805, 0.000000, X, Y) && !ellipse(22566.764720, 27550.324400, 423.235212, 423.235212, 0.000000, X, Y)
[Wed Aug 29 14:47:26 2012] Writing fullrun_mos1_xmm0550460801_pi300-10000_pass1_cl_src27.gif
[Wed Aug 29 14:50:50 2012] Mean detx,y = (-3990.84, -6165.22) 
[Wed Aug 29 14:50:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 14:51:13 2012] grppha failed
[Wed Aug 29 14:51:13 2012] Setting source spectrum file to fullrun_mos1_xmm0550460801_pi300-10000_pass1_cl_src27_src.pi.gz
[Wed Aug 29 14:51:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550460801_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Aug 29 14:51:54 2012] Not generating rmf since there are only 73 counts
[Wed Aug 29 14:51:54 2012] rmf not generated due to insufficient counts
[Wed Aug 29 14:59:11 2012] Updating aperture counts using extracted products
[Wed Aug 29 14:59:11 2012] Error reading totcts from fullrun_mos1_xmm0550460801_pi300-10000_pass1_cl_src27_src.pi.gz
[Wed Aug 29 14:59:11 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 14:59:13 2012] Flag b found in src. 27 procflags, skipping spectral fitting
[Wed Aug 29 14:59:13 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 29 14:59:14 2012] xmm0550460801/analysis//spectral/fullrun_mos1_xmm0550460801_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete