[Sat Aug 18 03:25:14 2012] Detection parameters:
  Position = (288.1, 278.6) = 18 38 25.59 -57 29 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.3 +/- 20.6
  Background counts = 22.9
  Rate = 0.009 +/- 0.0008

[Sat Aug 18 03:25:14 2012] Off-axis axis estimate = 1.62'
[Sat Aug 18 03:56:38 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 03:56:38 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sat Aug 18 03:56:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sat Aug 18 03:56:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.24"
[Sat Aug 18 04:21:59 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 18 04:21:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_src3.csv
[Sat Aug 18 04:21:59 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 18 04:21:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_src3.csv
[Sat Aug 18 04:21:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 04:21:59 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 18 04:21:59 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 18 04:21:59 2012] Fit fullrun_mos1_xmm0550460701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 18 04:45:54 2012] Spatial fit model total counts = 485.966000, observed total counts = 504.000000
[Sat Aug 18 04:45:54 2012] Offset between fit and detection position for source 8 = 0.382148 pixels
[Sat Aug 18 04:45:54 2012] 488.134000 total counts/ 363.492000 bgd. counts: snr = 6.537579
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.382148 pixels
  Position = (288.1, 278.2) = 18 38 25.58 -57 29 22.3
  Extent = 5.8 (4.3-7.3)", rotation angle = 0
  Source counts = 124.6 +/- 22.1
  Background counts = 363.5
  Rate = 0.004 +/- 0.0008
[Sat Aug 18 04:45:54 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 04:45:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 04:45:54 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 04:45:54 2012] Source does appear to be extended
[Sat Aug 18 04:45:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 05:27:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 05:27:27 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Sat Aug 18 05:27:27 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.890
[Sat Aug 18 05:27:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.81"
[Sat Aug 18 05:51:30 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug 18 05:51:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_src3.csv
[Sat Aug 18 05:51:30 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug 18 05:51:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_src3.csv
[Sat Aug 18 05:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 05:51:31 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug 18 05:51:31 2012] fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug 18 05:51:31 2012] Fit fullrun_mos1_xmm0550460701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug 18 06:14:46 2012] Spatial fit model total counts = 485.920000, observed total counts = 504.000000
[Sat Aug 18 06:14:46 2012] Offset between fit and detection position for source 8 = 0.006915 pixels
[Sat Aug 18 06:14:46 2012] 487.835000 total counts/ 362.462000 bgd. counts: snr = 6.585258
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.006915 pixels
  Position = (288.1, 278.2) = 18 38 25.58 -57 29 22.2
  Extent = 5.9 (4.3-7.4)", rotation angle = 0
  Source counts = 125.4 +/- 22.1
  Background counts = 362.5
  Rate = 0.004 +/- 0.0008
[Sat Aug 18 06:14:46 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 06:14:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 06:14:46 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 06:14:46 2012] Source does appear to be extended
[Sat Aug 18 06:14:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 06:51:43 2012] XMMSAS src. selection expression = ellipse(25015.236180, 24154.718200, 351.963610, 351.963610, 0.000000, X, Y)
[Sat Aug 18 06:51:43 2012] Writing source region out to fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8_src.reg
[Sat Aug 18 06:51:43 2012] Extracting stamp from image fullrun_mos1_xmm0550460701_pi300-10000_cl_sm2.00.img.gz, (268, 258) - (308, 298)
[Sat Aug 18 06:51:43 2012] XMMSAS bgd. selection expression = annulus(25015.236180, 24154.718200, 586.606017, 1173.212034, X, Y) && !ellipse(24598.335974, 23374.878878, 562.943672, 296.631660, 349.350807, X, Y)
[Sat Aug 18 06:51:43 2012] Writing fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8.gif
[Sat Aug 18 06:52:11 2012] Mean detx,y = (204.92, -205.37) 
[Sat Aug 18 06:52:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 06:52:19 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 06:52:19 2012] Setting source spectrum file to fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Aug 18 06:52:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Aug 18 07:35:23 2012] Updating aperture counts using extracted products
[Sat Aug 18 07:35:23 2012] Error reading totcts from fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Aug 18 07:35:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 07:35:24 2012] Using photon index=1.80, rate=0.00438, arf fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8.arf
[Sat Aug 18 07:35:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 07:35:24 2012] Updating source flux to 5.1e-14
[Sat Aug 18 07:36:01 2012] Reading fit data from xmm0550460701/analysis//spectral/fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8_pl.csv
[Sat Aug 18 07:36:01 2012] Spectral fit parameter nH value = 1.92239e+21
[Sat Aug 18 07:36:01 2012] Spectral fit parameter PhoIndex value = 2.79866
[Sat Aug 18 07:36:01 2012] Failed to get F(0.3-8.0) from xmm0550460701/analysis//spectral/fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sat Aug 18 07:36:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 07:36:01 2012] Using Nh = 1.9e+21, photon index=2.80, rate=0.00438, arf fullrun_mos1_xmm0550460701_pi300-10000_pass1_cl_src8.arf
[Sat Aug 18 07:36:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 07:36:01 2012] Updating source flux to 4.1e-14