[Tue May 29 19:11:26 2012] Detection parameters:
  Position = (265.0, 271.0) = 18 13 52.52 -57 43 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.6 +/- 20.1
  Background counts = 122.9
  Rate = 0.005 +/- 0.0009

[Tue May 29 19:11:26 2012] Off-axis axis estimate = 3.14'
[Tue May 29 19:13:52 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:13:52 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Tue May 29 19:13:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Tue May 29 19:13:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.00"
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src9.ximg exists
[Tue May 29 19:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src9.csv
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May 29 19:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src9.csv
[Tue May 29 19:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May 29 19:39:06 2012] Fit fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue May 29 20:25:00 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.161541 pixels away
[Tue May 29 20:25:00 2012] Vigneting correction estimate = 1.000000
[Tue May 29 20:25:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 20:25:00 2012] Assessing source extent using major
[Tue May 29 20:25:00 2012] Source does appear to be extended
[Tue May 29 20:25:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 20:25:11 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Tue May 29 20:25:11 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Tue May 29 20:25:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Tue May 29 20:25:11 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.00"
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src9.ximg exists
[Tue May 29 20:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src9.csv
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May 29 20:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src9.csv
[Tue May 29 20:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May 29 20:57:00 2012] Fit fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue May 29 21:43:23 2012] Spatial fit model total counts = 487.149000, observed total counts = 487.000000
[Tue May 29 21:43:23 2012] Offset between fit and detection position for source 9 = 0.214098 pixels
[Tue May 29 21:43:23 2012] 489.910600 total counts/ 431.437000 bgd. counts: snr = 2.815147
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.214098 pixels
  Position = (264.9, 271.1) = 18 13 52.59 -57 43 55.6
  Extent = 5.6 (4.2-7.9)", rotation angle = 0
  Source counts = 58.5 +/- 22.1
  Background counts = 431.4
  Rate = 0.003 +/- 0.001
[Tue May 29 21:43:23 2012] Vigneting correction estimate = 1.000000
[Tue May 29 21:43:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 21:43:23 2012] Assessing source extent using major axis lower bound
[Tue May 29 21:43:23 2012] Source does appear to be extended
[Tue May 29 21:43:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:43:33 2012] XMMSAS src. selection expression = ellipse(22995.879320, 23539.293400, 338.173810, 338.173810, 0.000000, X, Y)
[Tue May 29 21:43:33 2012] Writing source region out to fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src9_src.reg
[Tue May 29 21:43:33 2012] Extracting stamp from image fullrun_pn_xmm0550460601_pi300-10000_cl_sm2.00.img.gz, (245, 252) - (284, 291)
[Tue May 29 21:43:33 2012] XMMSAS bgd. selection expression = annulus(22995.879320, 23539.293400, 563.623016, 1127.246032, X, Y) && !ellipse(25108.781400, 24039.870000, 1190.856034, 498.494414, 74.395900, X, Y)
[Tue May 29 21:43:33 2012] Writing fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src9.gif
[Tue May 29 21:47:45 2012] Mean detx,y = (2252.43, -298.77) 
[Tue May 29 21:47:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:48:11 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:48:12 2012] Setting source spectrum file to fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 29 21:48:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 29 22:02:31 2012] Not generating rmf since there are only 58 counts
[Tue May 29 22:02:31 2012] rmf not generated due to insufficient counts
[Tue May 29 22:28:08 2012] Updating aperture counts using extracted products
[Tue May 29 22:28:08 2012] Error reading totcts from fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 29 22:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:28:09 2012] Using photon index=1.80, rate=0.0033, arf fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src9.arf
[Tue May 29 22:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:28:09 2012] Updating source flux to 9.5e-15
[Tue May 29 22:28:44 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting