[Tue May 29 19:11:26 2012] Detection parameters:
  Position = (289.1, 277.0) = 18 13 39.45 -57 43 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1454.4 +/- 49.7
  Background counts = 123.6
  Rate = 0.06 +/- 0.002

[Tue May 29 19:11:26 2012] Off-axis axis estimate = 1.70'
[Tue May 29 19:13:52 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:13:52 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue May 29 19:13:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue May 29 19:13:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.28"
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 29 19:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src3.csv
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 29 19:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src3.csv
[Tue May 29 19:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 29 19:39:06 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 29 19:39:06 2012] Fit fullrun_pn_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 29 20:25:00 2012] Spatial fit model total counts = 1626.480000, observed total counts = 1624.000000
[Tue May 29 20:25:00 2012] Offset between fit and detection position for source 3 = 0.133894 pixels
[Tue May 29 20:25:00 2012] 1553.237000 total counts/ 868.981000 bgd. counts: snr = 23.212049
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.133894 pixels
  Position = (289.1, 277.2) = 18 13 39.44 -57 43 29.5
  Extent = 6.1 (5.7-6.6)", rotation angle = 0
  Source counts = 684.3 +/- 39.4
  Background counts = 869.0
  Rate = 0.04 +/- 0.002
[Tue May 29 20:25:00 2012] Spatial fit model total counts = 1771.490000, observed total counts = 1487.000000
[Tue May 29 20:25:00 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 20:25:00 2012] Vigneting correction estimate = 1.000000
[Tue May 29 20:25:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 20:25:00 2012] Assessing source extent using major axis lower bound
[Tue May 29 20:25:00 2012] Source does appear to be extended
[Tue May 29 20:25:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 20:25:00 2012] Source is confused with source 4
[Tue May 29 20:25:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 20:25:11 2012] Initial guess for spatial extent in simple fitting = 6.14"
[Tue May 29 20:25:11 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.095
[Tue May 29 20:25:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.14"
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 29 20:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src3.csv
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 29 20:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src3.csv
[Tue May 29 20:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 29 20:57:00 2012] fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 29 20:57:00 2012] Fit fullrun_pn_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 29 21:43:23 2012] Spatial fit model total counts = 1623.500000, observed total counts = 1624.000000
[Tue May 29 21:43:23 2012] Offset between fit and detection position for source 3 = 0.000374 pixels
[Tue May 29 21:43:23 2012] 1550.127000 total counts/ 867.281000 bgd. counts: snr = 23.186909
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000374 pixels
  Position = (289.1, 277.2) = 18 13 39.44 -57 43 29.5
  Extent = 6.2 (5.7-6.6)", rotation angle = 0
  Source counts = 682.8 +/- 39.4
  Background counts = 867.3
  Rate = 0.04 +/- 0.002
[Tue May 29 21:43:23 2012] Vigneting correction estimate = 1.000000
[Tue May 29 21:43:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 21:43:23 2012] Assessing source extent using major axis lower bound
[Tue May 29 21:43:23 2012] Source does appear to be extended
[Tue May 29 21:43:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:43:33 2012] XMMSAS src. selection expression = ellipse(25101.673780, 24063.869200, 369.200411, 369.200411, 0.000000, X, Y)
[Tue May 29 21:43:33 2012] Writing source region out to fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3_src.reg
[Tue May 29 21:43:33 2012] Extracting stamp from image fullrun_pn_xmm0550460601_pi300-10000_cl_sm2.00.img.gz, (268, 256) - (310, 298)
[Tue May 29 21:43:33 2012] XMMSAS bgd. selection expression = annulus(25101.673780, 24063.869200, 615.334018, 1230.668035, X, Y) && !ellipse(25108.781400, 24039.870000, 1190.856034, 498.494414, 74.395900, X, Y) && !ellipse(25018.351105, 22488.718842, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:43:33 2012] Writing fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3.gif
[Tue May 29 21:44:55 2012] Mean detx,y = (92.21, -198.78) 
[Tue May 29 21:44:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:45:11 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:45:11 2012] Setting source spectrum file to fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 29 21:45:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 29 22:28:08 2012] Updating aperture counts using extracted products
[Tue May 29 22:28:08 2012] Error reading totcts from fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 29 22:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:28:09 2012] Using photon index=1.80, rate=0.0386, arf fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3.arf
[Tue May 29 22:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:28:09 2012] Updating source flux to 1.1e-13
[Tue May 29 22:28:44 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Tue May 29 22:28:44 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue May 29 22:29:04 2012] Reading fit data from xmm0550460601/analysis//spectral/fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3_pl.csv
[Tue May 29 22:29:04 2012] Spectral fit parameter nH value = 4.06057e+21
[Tue May 29 22:29:04 2012] Spectral fit parameter PhoIndex value = 3.60458
[Tue May 29 22:29:04 2012] Failed to get F(0.3-8.0) from xmm0550460601/analysis//spectral/fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue May 29 22:29:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:29:04 2012] Using Nh = 4.1e+21, photon index=3.60, rate=0.0386, arf fullrun_pn_xmm0550460601_pi300-10000_pass1_cl_src3.arf
[Tue May 29 22:29:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:29:04 2012] Updating source flux to 8.9e-14