[Tue May 29 19:12:05 2012] Detection parameters:
  Position = (290.4, 271.3) = 18 13 38.73 -57 43 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.3 +/- 17.5
  Background counts = 27.1
  Rate = 0.006 +/- 0.0006

[Tue May 29 19:12:05 2012] Off-axis axis estimate = 2.05'
[Tue May 29 20:01:53 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue May 29 20:01:53 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue May 29 20:01:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.276
[Tue May 29 20:01:53 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.45"
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 29 20:24:56 2012] Fit fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src4 appears to have run properly
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 29 20:24:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 29 20:24:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 29 20:24:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 20:25:05 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Tue May 29 20:25:05 2012] Vigneting correction estimate = 1.000000
[Tue May 29 20:25:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 20:25:05 2012] Assessing source extent using major
[Tue May 29 20:25:05 2012] Source does appear to be extended
[Tue May 29 20:25:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 20:25:05 2012] Source is confused with source 2
[Tue May 29 21:20:01 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:20:01 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue May 29 21:20:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.276
[Tue May 29 21:20:01 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.45"
[Tue May 29 21:43:19 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src4.ximg exists
[Tue May 29 21:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src4.csv
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May 29 21:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src4.csv
[Tue May 29 21:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May 29 21:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May 29 21:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May 29 21:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:43:27 2012] Spatial fit model total counts = 1080.460000, observed total counts = 825.000000
[Tue May 29 21:43:27 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 21:43:27 2012] Vigneting correction estimate = 1.000000
[Tue May 29 21:43:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 21:43:27 2012] Assessing source extent using major
[Tue May 29 21:43:27 2012] Source does appear to be extended
[Tue May 29 21:43:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:17:54 2012] XMMSAS src. selection expression = ellipse(25215.261353, 23557.487610, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 22:17:54 2012] Writing source region out to fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src5_src.reg
[Tue May 29 22:17:54 2012] Extracting stamp from image fullrun_mos2_xmm0550460601_pi300-10000_cl_sm2.00.img.gz, (253, 234) - (328, 309)
[Tue May 29 22:17:54 2012] XMMSAS bgd. selection expression = annulus(25215.261353, 23557.487610, 1087.500000, 2175.000000, X, Y) && !ellipse(25088.826202, 24060.477600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24980.365601, 22446.344574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22970.292000, 23532.094200, 419.706412, 419.706412, 0.000000, X, Y)
[Tue May 29 22:17:54 2012] Writing fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src5.gif
[Tue May 29 22:20:03 2012] Mean detx,y = (83.66, 323.73) 
[Tue May 29 22:20:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 22:20:13 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 22:20:13 2012] Setting source spectrum file to fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 22:20:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 29 22:26:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 22:26:15 2012] rmf not generated due to insufficient counts
[Tue May 29 22:28:09 2012] Updating aperture counts using extracted products
[Tue May 29 22:28:09 2012] Error reading totcts from fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 22:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:28:09 2012] Using photon index=1.80, rate=0.00599, arf fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src5.arf
[Tue May 29 22:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:28:09 2012] Updating source flux to 5.7e-14
[Tue May 29 22:28:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting