[Tue May 29 19:12:05 2012] Detection parameters:
  Position = (157.4, 227.7) = 18 14 51.08 -57 47 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.6 +/- 12.0
  Background counts = 22.6
  Rate = 0.002 +/- 0.0004

[Tue May 29 19:12:05 2012] Off-axis axis estimate = 11.44'
[Tue May 29 20:01:53 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Tue May 29 20:01:53 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Tue May 29 20:01:53 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.130
[Tue May 29 20:01:53 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.15"
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 29 20:24:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src11.csv
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 29 20:24:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src11.csv
[Tue May 29 20:24:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 29 20:24:56 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 29 20:24:56 2012] Fit fullrun_mos2_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May 29 20:25:05 2012] Source 12 is offset by 2.391204 and 5.687348 pixels which is larger than
2 X fitted extent = 1.438621 x 1.438621, not incorporating fit results
[Tue May 29 20:25:05 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.155262 pixels away
[Tue May 29 20:25:05 2012] Vigneting correction estimate = 1.000000
[Tue May 29 20:25:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 20:25:05 2012] Assessing source extent using major
[Tue May 29 20:25:05 2012] Source does appear to be extended
[Tue May 29 20:25:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:20:01 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:20:01 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Tue May 29 21:20:01 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.130
[Tue May 29 21:20:01 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.15"
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 29 21:43:20 2012] Fit fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_src11 appears to have run properly
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 29 21:43:20 2012] fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 29 21:43:20 2012] Fit fullrun_mos2_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May 29 21:43:27 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.321587 pixels away
[Tue May 29 21:43:27 2012] Vigneting correction estimate = 1.000000
[Tue May 29 21:43:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 21:43:27 2012] Assessing source extent using major
[Tue May 29 21:43:27 2012] Source does appear to be extended
[Tue May 29 21:43:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:17:54 2012] XMMSAS src. selection expression = ellipse(13645.312744, 19759.521301, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 22:17:54 2012] Writing source region out to fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src12_src.reg
[Tue May 29 22:17:54 2012] Extracting stamp from image fullrun_mos2_xmm0550460601_pi300-10000_cl_sm2.00.img.gz, (120, 190) - (195, 265)
[Tue May 29 22:17:54 2012] XMMSAS bgd. selection expression = annulus(13645.312744, 19759.521301, 1087.500000, 2175.000000, X, Y) && !ellipse(12467.044400, 20154.626800, 569.611216, 569.611216, 0.000000, X, Y)
[Tue May 29 22:17:54 2012] Writing fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src12.gif
[Tue May 29 22:21:37 2012] Mean detx,y = (-11946.67, 2206.65) 
[Tue May 29 22:21:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 22:21:47 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 22:21:47 2012] Setting source spectrum file to fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 29 22:21:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May 29 22:27:07 2012] Not generating rmf since there are only 66 counts
[Tue May 29 22:27:07 2012] rmf not generated due to insufficient counts
[Tue May 29 22:28:09 2012] Updating aperture counts using extracted products
[Tue May 29 22:28:09 2012] Error reading totcts from fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 29 22:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:28:09 2012] Using photon index=1.80, rate=0.00233, arf fullrun_mos2_xmm0550460601_pi300-10000_pass1_cl_src12.arf
[Tue May 29 22:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:28:09 2012] Updating source flux to 4.4e-14
[Tue May 29 22:28:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting