[Tue May 29 19:11:45 2012] Detection parameters:
  Position = (344.6, 136.2) = 18 13 9.17 -57 53 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3515.3 +/- 72.6
  Background counts = 21.4
  Rate = 0.1 +/- 0.003

[Tue May 29 19:11:45 2012] Off-axis axis estimate = 12.23'
[Tue May 29 19:39:07 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Tue May 29 19:39:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 19:39:07 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Tue May 29 19:39:07 2012] source mask rpix=2.9, npix_max = 45, mask sum = 48, frac = 1.048
[Tue May 29 19:39:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.54"
[Tue May 29 20:01:52 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 20:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_src1.csv
[Tue May 29 20:01:52 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 20:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_src1.csv
[Tue May 29 20:01:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 20:01:52 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 20:01:52 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 20:01:52 2012] Fit fullrun_mos1_xmm0550460601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 20:25:03 2012] Spatial fit model total counts = 3644.630000, observed total counts = 3619.000000
[Tue May 29 20:25:03 2012] Offset between fit and detection position for source 1 = 0.081803 pixels
[Tue May 29 20:25:03 2012] 3650.610000 total counts/ 1083.820000 bgd. counts: snr = 77.967168
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.081803 pixels
  Position = (344.5, 136.3) = 18 13 9.21 -57 53 42.2
  Extent = 6.9 (6.7-7.2)", rotation angle = 0
  Source counts = 2566.8 +/- 60.4
  Background counts = 1083.8
  Rate = 0.09 +/- 0.002
[Tue May 29 20:25:03 2012] Vigneting correction estimate = 1.000000
[Tue May 29 20:25:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 20:25:03 2012] Assessing source extent using major axis lower bound
[Tue May 29 20:25:03 2012] Source does appear to be extended
[Tue May 29 20:25:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 20:57:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 20:57:00 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Tue May 29 20:57:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.146
[Tue May 29 20:57:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.91"
[Tue May 29 21:20:01 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 29 21:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_src1.csv
[Tue May 29 21:20:01 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 29 21:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_src1.csv
[Tue May 29 21:20:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:20:01 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 29 21:20:01 2012] fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 29 21:20:01 2012] Fit fullrun_mos1_xmm0550460601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 29 21:43:26 2012] Spatial fit model total counts = 3263.400000, observed total counts = 3243.000000
[Tue May 29 21:43:26 2012] Offset between fit and detection position for source 1 = 0.057821 pixels
[Tue May 29 21:43:26 2012] 3262.492000 total counts/ 951.672000 bgd. counts: snr = 74.907012
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057821 pixels
  Position = (344.6, 136.3) = 18 13 9.18 -57 53 42.2
  Extent = 6.0 (5.7-6.3)", rotation angle = 0
  Source counts = 2310.8 +/- 57.1
  Background counts = 951.7
  Rate = 0.08 +/- 0.002
[Tue May 29 21:43:26 2012] Vigneting correction estimate = 1.000000
[Tue May 29 21:43:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 21:43:26 2012] Assessing source extent using major axis lower bound
[Tue May 29 21:43:26 2012] Source does appear to be extended
[Tue May 29 21:43:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:05:51 2012] Counts = 2310.820000, rescaling region sizes by 2.000000
[Tue May 29 22:05:51 2012] XMMSAS src. selection expression = ellipse(29930.398200, 11807.294400, 720.522021, 720.522021, 0.000000, X, Y)
[Tue May 29 22:05:51 2012] Writing source region out to fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1_src.reg
[Tue May 29 22:05:51 2012] Extracting stamp from image fullrun_mos1_xmm0550460601_pi300-10000_cl_sm2.00.img.gz, (303, 95) - (386, 178)
[Tue May 29 22:05:51 2012] XMMSAS bgd. selection expression = annulus(29930.398200, 11807.294400, 2401.740069, 4803.480138, X, Y) && !ellipse(26414.625702, 9167.954308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.633698, 10652.883652, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 22:05:51 2012] Writing fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1.gif
[Tue May 29 22:05:53 2012] Mean detx,y = (13196.01, -2697.54) 
[Tue May 29 22:05:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 22:06:23 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 22:06:23 2012] Setting source spectrum file to fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 29 22:06:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 29 22:28:09 2012] Updating aperture counts using extracted products
[Tue May 29 22:28:09 2012] Error reading totcts from fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 29 22:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:28:09 2012] Using photon index=1.80, rate=0.0822, arf fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1.arf
[Tue May 29 22:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:28:09 2012] Updating source flux to 1.8e-12
[Tue May 29 22:28:29 2012] Reading fit data from xmm0550460601/analysis//spectral/fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 29 22:28:29 2012] Spectral fit parameter nH value = 3.40341e+21
[Tue May 29 22:28:29 2012] Spectral fit parameter PhoIndex value = 4.29521
[Tue May 29 22:28:29 2012] Failed to get F(0.3-8.0) from xmm0550460601/analysis//spectral/fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 29 22:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:28:29 2012] Using Nh = 3.4e+21, photon index=4.30, rate=0.0822, arf fullrun_mos1_xmm0550460601_pi300-10000_pass1_cl_src1.arf
[Tue May 29 22:28:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:28:30 2012] Updating source flux to 1.2e-12