[Sat Jul 14 13:53:45 2012] Detection parameters:
  Position = (292.2, 275.9) = 11 53 11.78 -39 7 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 470.5 +/- 28.3
  Background counts = 54.4
  Rate = 0.01 +/- 0.0008

[Sat Jul 14 13:53:46 2012] Off-axis axis estimate = 1.70'
[Sat Jul 14 14:52:38 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:52:38 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jul 14 14:52:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Jul 14 14:52:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jul 14 15:26:29 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 15:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 15:26:29 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 15:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 15:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:26:30 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 15:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul 14 15:26:30 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 15:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul 14 15:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:26:41 2012] Source 8 is offset by 6.936200 and 5.553479 pixels which is larger than
2 X fitted extent = 0.836455 x 0.836455, not incorporating fit results
[Sat Jul 14 15:26:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 15:26:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 15:26:42 2012] Assessing source extent using major
[Sat Jul 14 15:26:42 2012] Source does appear to be extended
[Sat Jul 14 15:26:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 16:12:27 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:12:27 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jul 14 16:12:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Jul 14 16:12:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 16:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 16:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 16:46:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 16:46:44 2012] Fit fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 16:46:58 2012] Spatial fit model total counts = 603.653000, observed total counts = 565.000000
[Sat Jul 14 16:46:58 2012] Offset between fit and detection position for source 8 = 0.151317 pixels
[Sat Jul 14 16:46:58 2012] 596.662000 total counts/ 304.578000 bgd. counts: snr = 16.736263
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.151317 pixels
  Position = (292.4, 275.8) = 11 53 11.74 -39 7 49.1
  Extent = 6.0 (5.3-6.8)", rotation angle = 0
  Source counts = 292.1 +/- 24.4
  Background counts = 304.6
  Rate = 0.01 +/- 0.0008
[Sat Jul 14 16:46:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:46:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:46:58 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 16:46:58 2012] Source does appear to be extended
[Sat Jul 14 16:46:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:41:36 2012] XMMSAS src. selection expression = ellipse(25386.097800, 23942.183600, 361.488010, 361.488010, 0.000000, X, Y)
[Sat Jul 14 17:41:36 2012] Writing source region out to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8_src.reg
[Sat Jul 14 17:41:36 2012] Extracting stamp from image fullrun_mos2_xmm0550460301_pi300-10000_cl_sm2.00.img.gz, (272, 255) - (313, 297)
[Sat Jul 14 17:41:36 2012] XMMSAS bgd. selection expression = annulus(25386.097800, 23942.183600, 602.480017, 1204.960035, X, Y) && !ellipse(24660.514910, 22436.939600, 737.460344, 737.460344, 0.000000, X, Y)
[Sat Jul 14 17:41:36 2012] Writing fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8.gif
[Sat Jul 14 17:41:39 2012] Mean detx,y = (57.97, 77.92) 
[Sat Jul 14 17:41:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 17:41:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 17:41:47 2012] Setting source spectrum file to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jul 14 17:41:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jul 14 18:12:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 18:12:09 2012] Error reading totcts from fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jul 14 18:12:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 18:12:10 2012] Using photon index=1.80, rate=0.00956, arf fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8.arf
[Sat Jul 14 18:12:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 18:12:10 2012] Updating source flux to 1.2e-13
[Sat Jul 14 18:12:29 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Sat Jul 14 18:13:17 2012] Reading fit data from xmm0550460301/analysis//spectral/fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8_pl.csv
[Sat Jul 14 18:13:17 2012] Spectral fit parameter nH value = 4.29216e+21
[Sat Jul 14 18:13:17 2012] Spectral fit parameter PhoIndex value = 4.28141
[Sat Jul 14 18:13:17 2012] Failed to get F(0.3-8.0) from xmm0550460301/analysis//spectral/fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 18:13:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 18:13:17 2012] Using Nh = 4.3e+21, photon index=4.28, rate=0.00956, arf fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src8.arf
[Sat Jul 14 18:13:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 18:13:17 2012] Updating source flux to 7.8e-14